Inhaltszusammenfassung zur Seite Nr. 1
MPA3017AT
MPA3026AT
MPA3035AT
MPA3043AT
MPA3052AT
DISK DRIVES
PRODUCT MANUAL
C141-E034-02EN
Inhaltszusammenfassung zur Seite Nr. 2
REVISION RECORD Edition Date published Revised contents 01 Jan., 1997 02 August, 1997 Specification No.: C141-E034-**EN The contents of this manual is subject to change without prior notice. All Rights Reserved. Copyright 1997 FUJITSU LIMITED C141-E034-02EN i
Inhaltszusammenfassung zur Seite Nr. 3
PREFACE This manual describes the MPA3017AT/MPA3026AT/MPA3035AT/MPA3043AT/MPA3052AT, a 3.5-inch hard disk drive with a BUILT-IN controller that is compatible with the ATA interface. This manual explains, in detail, how to incorporate the hard disk drives into user systems. This manual assumes that users have a basic knowledge of hard disk drives and their application in computer systems. This manual consists of the following six chapters: Chapter 1 DEVICE OVERVIEW Chapter 2 DEVICE CONFIGURATION
Inhaltszusammenfassung zur Seite Nr. 4
Conventions for Alert Messages This manual uses the following conventions to show the alert messages. An alert message consists of an alert signal and alert statements. The alert signal consists of an alert symbol and a signal word or just a signal word. The following are the alert signals and their meanings: This indicates a hazarous situation likely to result in serious personal injury if the user does not perform the procedure correctly. This indicates a hazarous situation could result in p
Inhaltszusammenfassung zur Seite Nr. 5
LIABILITY EXCEPTION "Disk drive defects" refers to defects that involve adjustment, repair, or replacement. Fujitsu is not liable for any other disk drive defects, such as those caused by user misoperation or mishandling, inappropriate operating environments, defects in the power supply or cable, problems of the host system, or other causes outside the disk drive. C141-E034-02EN v
Inhaltszusammenfassung zur Seite Nr. 6
CONTENTS page CHAPTER 1 DEVICE OVERVIEW......................................................................................... 1 - 1 1.1 Features................................................................................................................................. 1 - 1 1.1.1 Functions and performance................................................................................................... 1 - 1 1.1.2 Adaptability .............................................................
Inhaltszusammenfassung zur Seite Nr. 7
3.4.1 Location of setting jumpers .................................................................................................. 3 - 9 3.4.2 Factory default setting .......................................................................................................... 3 - 10 3.4.3 Jumper configuration ............................................................................................................ 3 - 10 CHAPTER 4 THEORY OF DEVICE OPERATION......................................
Inhaltszusammenfassung zur Seite Nr. 8
5.2.2 Command block registers ..................................................................................................... 5 - 8 5.2.3 Control block registers.......................................................................................................... 5 - 13 5.3 Host Commands.................................................................................................................... 5 - 13 5.3.1 Command code and parameters ............................................
Inhaltszusammenfassung zur Seite Nr. 9
6.3.1 Power save mode .................................................................................................................. 6 - 8 6.3.2 Power commands.................................................................................................................. 6 - 10 6.4 Defect Management.............................................................................................................. 6 - 10 6.4.1 Spare area ...........................................................
Inhaltszusammenfassung zur Seite Nr. 10
FIGURES page 1.1 Current fluctuation (Typ.) at +5V when power is turned on................................................. 1 - 7 2.1 Disk drive outerview............................................................................................................. 2 - 1 2.2 Configuration of disk media heads ....................................................................................... 2 - 3 2.3 1 drive system configuration..................................................................
Inhaltszusammenfassung zur Seite Nr. 11
5.4 Protocol for command abort ................................................................................................. 5 - 57 5.5 WRITE SECTOR(S) command protocol.............................................................................. 5 - 58 5.6 Protocol for the command execution without data transfer................................................... 5 - 59 5.7 Normal DMA data transfer ..............................................................................................
Inhaltszusammenfassung zur Seite Nr. 12
TABLES page 1.1 Specifications........................................................................................................................ 1 - 4 1.2 Model names and product numbers ...................................................................................... 1 - 5 1.3 Current and power dissipation .............................................................................................. 1 - 6 1.4 Environmental specifications...............................................
Inhaltszusammenfassung zur Seite Nr. 13
CHAPTER 1 DEVICE OVERVIEW 1.1 Features 1.2 Device Specifications 1.3 Power Requirements 1.4 Environmental Specifications 1.5 Acoustic Noise 1.6 Shock and Vibration 1.7 Reliability 1.8 Error Rate 1.9 Media Defects Overview and features are described in this chapter, and specifications and power requirement are described. The MPA3017AT/MPA3026AT/MPA3035AT/MPA3043AT/MPA3052AT is a 3.5-inch hard disk drive with a built-in ATA controller. The disk drive is compact and reliable. 1.1 Features 1.1.1 Fun
Inhaltszusammenfassung zur Seite Nr. 14
(4) Average positioning time Use of a rotary voice coil motor in the head positioning mechanism greatly increases the positioning speed. The average positioning time is 10 ms (at read). 1.1.2 Adaptability (1) Power save mode The power save mode feature for idle operation, stand by and sleep modes makes the disk drive ideal for applications where power consumption is a factor. (2) Wide temperature range The disk drive can be used over a wide temperature range (5°C to 55°C). (3) Low noise and vib
Inhaltszusammenfassung zur Seite Nr. 15
(5) Error correction and retry by ECC If a recoverable error occurs, the disk drive itself attempts error recovery. The 18-byte ECC has improved buffer error correction for correctable data errors. (6) Write cache When the disk drive receives a write command, the disk drive posts the command completion at completion of transferring data to the data buffer completion of writing to the disk media. This feature reduces the access time at writing. C141-E034-02EN 1 - 3
Inhaltszusammenfassung zur Seite Nr. 16
1.2 Device Specifications 1.2.1 Specifications summary Table 1.1 shows the specifications of the disk drive. Table 1.1 Specifications MPA3017AT MPA3026AT MPA3035AT MPA3043AT MPA3052AT Formatted Capacity (*1) 1750.00 MB 2625.00 MB 3500.00 MB 4375.00 MB 5250.01 MB Number of Heads 2345 6 Number of Cylinders 8,713 + 84 (User + Alternate & SA) Bytes per Sector 512 Recording Method (8/9) PRML Track Density 9202 TPI Bit Density 137,285 BPI Rotational Speed 5400 rpm ± 0.5% Average Latency 5.56 ms Positi
Inhaltszusammenfassung zur Seite Nr. 17
1.2.2 Model and product number Table 1.2 lists the model names and product numbers. Table 1.2 Model names and product numbers Model Name Capacity Mounting Screw Order No. Others (user area) MPA3017AT 1749.56 MB No. 6-32UNC CA01602-B321 MPA3026AT 2624.86 MB No. 6-32UNC CA01602-B331 MPA3035AT 3499.13 MB No. 6-32UNC CA01602-B341 MPA3043AT 4374.42 MB No. 6-32UNC CA01602-B351 MPA3052AT 5249.72 MB No. 6-32UNC CA01602-B361 MPA3017AT 1749.56 MB No. 6-32UNC CA01602-B421 UDMA33 version MPA3026AT 2624.86 M
Inhaltszusammenfassung zur Seite Nr. 18
(3) Current Requirements and Power Dissipation Table 1.3 lists the current and power dissipation. Table 1.3 Current and power dissipation Typical RMS current (*1) Mode of Typical Power (*2) Operation +12 V +5 V Model MPA MPA MPA All Models MPA MPA MPA 3017AT 3026AT 3043AT 3017AT 3026AT 3043AT MPA MPA MPA MPA 3035AT 3052AT 3035AT 3052AT Spin up 1.3 A 0.520 A 18.2 watts 1.5 A peak 0.6 A peak Idle (Ready) (*3) 0.120 A 0.155 A 0.185 A 0.443 A 3.66 watts 4.08 watts 4.44 watts R/W (On Track) 0.130 A
Inhaltszusammenfassung zur Seite Nr. 19
(4) Current fluctuation (Typ.) at +5V when power is turned on Note: Maximum current is 1.5 A and is continuance is 1.5 seconds Figure 1.1 Current fluctuation (Typ.) at +5V when power is turned on (5) Power on/off sequence The voltage detector circuit monitors +5 V and +12 V. The circuit does not allow a write signal if either voltage is abnormal. This prevents data from being destroyed and eliminates the need to be concerned with the power on/off sequence. C141-E034-02EN 1 - 7
Inhaltszusammenfassung zur Seite Nr. 20
1.4 Environmental Specifications Table 1.4 lists the environmental specifications. Table 1.4 Environmental specifications Temperature • Operating 5°C to 55°C (ambient) 5°C to 60°C (disk enclosure surface) • Non-operating –40°C to 60°C • Thermal Gradient 20°C/h or less Humidity • Operating 8% to 80%RH (Non-condensing) • Non-operating 5% to 85%RH (Non-condensing) • Maximum Wet Bulb 29°C Altitude (relative to sea level) • Operating –60 to 3,000 m (–200 to 10,000 ft) • Non-op
