Bedienungsanleitung Agilent Technologies FIXTURE U7242A

Inhaltszusammenfassung zur Seite Nr. 1

U7242A USB3.0 Test
Fixture
User’s Guide
Agilent Technologies

Inhaltszusammenfassung zur Seite Nr. 2

Notices © Agilent Technologies, Inc. 2009 defined in FAR 52.227-19(c)(1-2) (June Warranty 1987). U.S. Government users will receive No part of this manual may be reproduced in The material contained in this docu- no greater than Limited Rights as defined in any form or by any means (including elec- ment is provided “as is,” and is sub- FAR 52.227-14 (June 1987) or DFAR tronic storage and retrieval or translation ject to being changed, without notice, 252.227-7015 (b)(2) (November 1995), a

Inhaltszusammenfassung zur Seite Nr. 3

Contents U7242A USB 3.0 Test Fixture Description 5 Fixture and Accessories 6 Dimension 6 Characteristics, Regulatory, and Safety Information 7 Electrical Characteristics 7 Operating and Non-operating Environmental Characteristics 7 Safety Information 7 3

Inhaltszusammenfassung zur Seite Nr. 4

4 Agilent U7242AUSB 3.0 Test Fixture User’s Guide

Inhaltszusammenfassung zur Seite Nr. 5

U7242A USB 3.0 Test Fixture Description The U7242A USB3.0 test fixture is required to perform the measurement with the Agilent U7243A USB3.0 Electrical Compliance Test Application. The fixture helps you to easily access the USB3.0 test signals. The U7242A USB3.0 test fixture is required for the all the Far End (TP1) tests including: • Far End Unit Internal test � Far End SSC Slew Rate test � Far End Template test � Far End Peak-to-Peak Differential Output Voltage test � Far End RMS Random Jit

Inhaltszusammenfassung zur Seite Nr. 6

Fixture and Accessories The complete set of USB3.0 test fixture contains the following items: Part Number Description Quantity U7242-66501 USB 3.0 test fixture 1 unit 8121-1880 USB 3.0 Std-A to Std-B cable (4 inches) 1 unit 8121-1924 USB 3.0 Std-A to Std-B cable (3.1 inches) 1 unit 1253-8358 Double Banana Plug With Shorting Bar 1 unit Dimension The dimension of the U7242A test fixture board is as follows: PCB board height = 2.00 inches PCB board width = 7.75 inches PCB board thickness = 0.063 in

Inhaltszusammenfassung zur Seite Nr. 7

Characteristics, Regulatory, and Safety Information Electrical Characteristics The following electrical characteristics are the specification of the U7242A USB3.0 test fixture: Description Specification Trace Impedance 100 ohm + 10% Mated Connector 90 ohm + 10% Cable 90 ohm + 10% Operating and Non-operating Environmental Characteristics The following are the environmental characteristics of the U7242A USB3.0 test fixture: Description Minimum Requirement Ambient temperature Operating = 0°C to 4

Inhaltszusammenfassung zur Seite Nr. 8

Minimum Requirement: IEC 61010-1: Second edition 2001-2 EN 61010-1:2001 UL3111-1 or UL 6101B-1:2003 (must be an Agilent ID) Canada: CSA-C22.2 No. 1010.1:1992 8

Inhaltszusammenfassung zur Seite Nr. 9

Inhaltszusammenfassung zur Seite Nr. 10

www.agilent.com © Agilent Technologies, Inc. 2009 First edition, May 2009 *U7242-97000* U7242-97000 Agilent Technologies