Bedienungsanleitung Vizio N-8510MS

Inhaltszusammenfassung zur Seite Nr. 1

INSTALLATION MANUAL
IP STANDARD MASTER STATION N-8510MS
Thank you for purchasing TOA's IP Standard Master
Station.
Please carefully follow the instructions in this manual to
ensure long, trouble-free use of your equipment.
1. SAFETY PRECAUTIONS
• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe
operation.
• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or
cautions regardin

Inhaltszusammenfassung zur Seite Nr. 2

3. FEATURES • Clear conversations between stations over wide band. • The system's echo cancellation* feature makes hands-free duplex conversation possible (conversations made without lifting a handset at both parties) between stations. • Can be connected to an existing local area network (LAN) or wide-area network (WAN). The system can also be easily connected to fiber-optic networks without restrictions on operating distance. • The dedicated N-8000 software program enables centralized control

Inhaltszusammenfassung zur Seite Nr. 3

6. WALL MOUNTING The optional YC-280 Wall mounting bracket is required. The YC-280 can be mounted to a one-gang electrical box. 6.1. Mounting YC-280 Wall mounting bracket (optional) Step 1. Install the YC-280 to the wall. N-8510MS Notes Wall surface • Use the appropriate screws for the construction of wall. • Wood screws 3.5 x 20 are supplied with the 2 YC-280. • No fitting screws for an electrical box are supplied. Use commercially available screws. Step 2. Hang the station on the wall mounti

Inhaltszusammenfassung zur Seite Nr. 4

8. WIRING [Power supply connection] N-8510MS rear The following 2 methods are available for supplying power to the station. • From a DC 12 V AC adapter • From an IEEE802.3af compliant PoE switching hub DC INPUT CONTACT IN LAN (For connection, refer to the instruction 12V 400mACH manual supplied with the switching hub.) Cable [AC adapter connection] 1 Connect the AC adapter* . Install the supplied ferrite clamp on the AC adapter cable by winding the cable around the ferrite clamp once. Ferr