Bedienungsanleitung Antec 4U

Inhaltszusammenfassung zur Seite Nr. 1

STUDIO SERIES
TAKE 4
4U RACKMOUNT CASE
User’s Manual

Inhaltszusammenfassung zur Seite Nr. 2

At Antec, we continually refine and improve our products to ensure the highest quality. So it's possible that your new case may differ slightly from the descriptions in this manual. This isn't a problem; it's simply an improvement. As of the date of publication, all features, descriptions, and illustrations in this manual are correct. Disclaimer This manual is intended only as a guide for Antec's Computer Enclosures. For more comprehensive instructions on installing your motherboard and peripher

Inhaltszusammenfassung zur Seite Nr. 3

rack, please use the clear plastic film that came with the toolbox to cover the ventilation (see picture 3). This can prevent hot air in the cabinet from entering the system and causing heat related system problems. CONNECTING THE USB PORTS Picture 3 You will find two 4-pin connectors on cables attached to the front USB ports. Connect the 4-pin connectors to your motherboard headers so that the USB Power pins match the VCC pins on the connectors. Note: Please check your motherboard manual for yo

Inhaltszusammenfassung zur Seite Nr. 4

3.5" DEVICE INSTALLATION With the front bezel facing you, turn the latch and swing the front door. You can see there are two 5.25" and two 3.5" external drive bays. Inside the case there are four 3.5" drive cages. For external 3.5" devices: 1. Locate the external 3.5" drive bays. They are to the right of the 5.25" drive bays. 2. Unscrew the 4 small Phillips head screws located on the front panel around the drive cage. 3. Pull the cage and unscrew the drive bay covers. 4. Install your external 3.

Inhaltszusammenfassung zur Seite Nr. 5

Specifications: Size: 120 x 120 x 25.4 mm Rated Voltage: DC 12V Operating Voltage: 10.2V ~ 13.8V Speed Input Air Flow - at Static Acoustical Input Current rated voltage Pressure - at Noise Power zero static rated voltage pressure at zero air (minimal flow value) High 0.24A (max.) 2.24 m³ / min 2.5mm-H2O 30 dBA 2.9 W 2000RPM (79 CFM) (0.10inch-H2O) Medium 0.2A 1.59 m³ / min 1.5mm-H2O 28 dBA 2.4 W 1600RPM (56 CFM) (0.06inch-H2O) Low 0.13A 1.1 m³ / min 0.9mm-H2O 25 dBA 1.6 W 1200RPM (39 CFM) (0.

Inhaltszusammenfassung zur Seite Nr. 6

Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 Tel: 510-770-1200 Fax: 510-770-1288 Antec Europe B.V. Sydneystraat 33 3047 BP Rotterdam The Netherlands Tel: +31 (0) 10 462-2060 Fax: +31 (0) 10 437-1752 Technical Support US & Canada 1-800-22ANTEC customersupport@antec.com Europe +31 (0) 10 462-2060 europe.techsupport@antec.com www.antec.com © Copyright 2005 Antec, Inc. All rights reserved. All trademarks are the property of their respective owners. Reproduction in whole or in part without writt