Bedienungsanleitung Motorola MOTONAV TN20

Inhaltszusammenfassung zur Seite Nr. 1

MOTONAV TN20 and TN30 software update
®
Download & installations instructions for Windows PCs

The following instructions will walk you through the steps needed to download and install your
software update on the Motorola MOTONAV TN20 or TN30 GPS navigation device. There are
two basic steps for upgrading the software: (i) Download the software update to an SD memory
card; and (ii) upgrade the GPS navigation device. This procedure should only be used for
®
Windows PCs.

If you hav

Inhaltszusammenfassung zur Seite Nr. 2

2 Mount the SD memory card There are various ways to mount the SD memory card on your Personal or Laptop Computer. Choose the most convenient option from the list below: 1. Insert the SD memory card into the SD card slot of your Personal or Laptop Computer, if one is available. 2. Insert the SD memory card into the USB SD card reader, and then connect the card reader to a USB port on your Personal or Laptop Computer. 3. Power-up your MOTONAV GPS navigation device. Insert the SD memo

Inhaltszusammenfassung zur Seite Nr. 3

4 GPS Navigation Device Upgrade Instructions 1. Ensure the MOTONAV GPS Navigation Device is fully charged. 2. Power-down the MOTONAV Device by holding the power button for at least 8 seconds, until the charging LED indicator blinks. 3. Insert the SD memory card into the SD card slot of the MOTONAV GPS Navigation Device. Note: This step is not necessary if the memory card is already installed in your MOTONAV GPS Navigation Device (option 3 was selected from Step 2 above). 4. Power-on th