Bedienungsanleitung Lava Computer Lava 2SP-550

Inhaltszusammenfassung zur Seite Nr. 1

LAVA 2SP-PCIe [DB-9, DB-9]
Quick Installation Guide
PORT B
Pb RoHS
LAVA COMPUTERS
MADE
2SP-550 PCIe IN
CANADA
P.N. MOKO L143.x
Rev. A00
PORT A
SEMICONDUCTOR
MCS9901CV-AA
INSL10200
4E42503 - 06 0743

Inhaltszusammenfassung zur Seite Nr. 2

Windows Hardware and 1 Driver Installation 1. Before opening the casing of your computer, make sure that all power is off. 2. Locate an unused PCIe slot and insert the 2SP-PCIe card into it. Ensure that the card is well seated. 3. Screw the metal bracket of the 2SP-PCIe card to your PC’s casing, screw the second serial port bracket to the casing also, and replace the machine’s cover. 4. Turn the PC on. 5. When Windows starts, it will find a 2SP-PCIe Controller and will ask you for a driver for t

Inhaltszusammenfassung zur Seite Nr. 3

2 Changing Com numbering of the 2SP-PCIe ports In Windows 2000/XP/Vista, Com port numbering can be changed by double-clicking the serial port entry displayed in Windows' Device Manager (as described earlier). Go to Port Settings | Advanced, and choose Com Port #. Release Notes: A. Because the 2SP-PCIe card uses PCI (not ISA) I/O address ranges, it will never be seen by your BIOS at boot-up as a standard port even if the address has been changed in Windows using the above procedure.This is normal

Inhaltszusammenfassung zur Seite Nr. 4

LAVA Technical Support 9:00 am to 5:30 pm Monday to Friday (Eastern Time) Tel: +416 674-5942 Fax: + 416 674-8262 E-mail: tech@lavalink.com Internet: www.lavalink.com LAVA Computer MFG Inc. This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.