Inhaltszusammenfassung zur Seite Nr. 1
Corsair Obsidian
Series 800D
User Manual
Corsair Obsidian Series 800D
High Performance Computer Chassis
Inhaltszusammenfassung zur Seite Nr. 2
Obsidian Series 800D USER MANUAL Congratulations on the purchase of your new Corsair Obsidian Series 800D high-performance PC chassis. The Obsidian 800D has been designed to offer high-end features and performance, such as an innovative cooling design and support for liquid cooling systems. We hope it serves you well in your quest to build your ultimate Dream PC! CONTENTS OF USER MANUAL Contents 1.0. Product Overview ..................................................................
Inhaltszusammenfassung zur Seite Nr. 3
Obsidian Series 800D USER MANUAL 2.4. How to install a hard drive into the lower 3.5” drive bays ......................................................... 14 2.5. How to use the CPU heatsink backplate door ............................................................................ 16 2.6. How to install an optical drive .................................................................................................... 17 2.7. How to install the motherboard ............................
Inhaltszusammenfassung zur Seite Nr. 4
Obsidian Series 800D USER MANUAL 1.0. Product Overview 1.1. Specifications 24" (H) x 24" (L) x 9" (W) - (609mm x Dimensions 609mm x 229mm) Aluminum Faceplate, Steel Structure Material Black Color Model 800D (x5) 5.25" (x4) 3.5" SATA Hot Swappable Drive Bays (x2) 3.5" Internal (x3) 140mm Fans Cooling Up to 4x 120mm Fans (not included) 7 (+1 vent) Expansion Slots ATX, mATX, EATX Motherboard (x4) USB 2.0 (x1) IEEE1394 Front I/O (x1) Headphone, (x1) MIC ATX (not incl
Inhaltszusammenfassung zur Seite Nr. 5
Obsidian Series 800D USER MANUAL 1.2. Parts List 1 – Side Panels 9 – HDD Drive Dock Door 17 – Lower HDD bay shield 2 – 140mm rear fan 10 – Front Bezel 18 – HDD Drive Dock Fan Shroud 3 – 3 x 120mm top fan vents 11 – Lower HDD bay cover 19 – 140mm HDD fan 4 – CPU backplate cover 12 – Lower HDD bay rails 20 – HDD SATA Backplane Shield 5 – Small rubber grommet 13 – 140mm intake fan 21 – Front I/O ports 6 – Large rubber grommet 14 – Case feet 22 – Front I/O port cover 7 – PSU bay shiel
Inhaltszusammenfassung zur Seite Nr. 6
Obsidian Series 800D USER MANUAL 1.3. Accessories Included Image Part Name Qty Used for Copper Stand Off 16 M/B Tray (color black) Hard Drive and Motherboard Motherboard, Hard Screws 36 Drives (color black) Case Fan Screws 14 For top mount fans (color black) Lower Hard Drive Bay Fan Screws For lower HDD bay 6 (color black) fan Drive Rails Lower HDD bay drive 4 (color black) install Rubber Vibration Damper for Lower HDD bay fan 120mm fan 1 (color black)
Inhaltszusammenfassung zur Seite Nr. 7
Obsidian Series 800D USER MANUAL 2.0. Operation 2.1. How to remove and re-install side panels 2.1.1. Removing the side panel Press and hold the release button on the rear of the case for the corresponding side panel. Gently pull the side panel away from case and then lift vertically to remove the panel. PULL TOWARDS YOU THEN LIFT 2.1.2. Re-installing the side panel Step 1 – Slide the side panel back into the case, making sure to catch the three grooved latches at the locati
Inhaltszusammenfassung zur Seite Nr. 8
Obsidian Series 800D USER MANUAL Step 2 - Once the panel is securely latched to the bottom of the case, tilt the side panel back up into the case while holding the corresponding release button. When the side panel is flush, release the button and the side panel will lock into place. 2.2. How to remove and re-install the front panel 2.2.1. Removing the front panel Standing in front of the case, reach under the bottom of the front panel and, using firm pressure, pull upwards and f
Inhaltszusammenfassung zur Seite Nr. 9
Obsidian Series 800D USER MANUAL 2.2.2. Re-installing the front panel Once you are ready to re-install the front panel, line up the mounting pegs with the holes, as indicated in the above image. Press the front panel firmly on the locations indicated until it latches. 2.3. How to install a hard drive into the hot-swap drive dock 2.3.1. Attaching cables to the SATA backplane Step 1 – Remove the cover of the SATA backplane as shown. 9
Inhaltszusammenfassung zur Seite Nr. 10
Obsidian Series 800D USER MANUAL Step 2 – Connect the included power cable to the SATA backplane. Step 3 – Connect the included SATA data cables to the SATA backplane. 10
Inhaltszusammenfassung zur Seite Nr. 11
Obsidian Series 800D USER MANUAL Step 4 – Re-attach cover. 2.3.2. Installing a SATA drive Step 1 – Open the door Gently press on the side of the front door and it will pop open. 11
Inhaltszusammenfassung zur Seite Nr. 12
Obsidian Series 800D USER MANUAL Step 2 – Remove the drive carrier Press the release switch and pull the drive carrier out of the drive bay using the pull tab. Step 3 – Install the SATA hard drive into the drive carrier Use the four provided screws (two per side). 12
Inhaltszusammenfassung zur Seite Nr. 13
Obsidian Series 800D USER MANUAL Step 4 – Re-install the drive carrier into the drive bay. Gently slide the drive carrier back into the drive bay, leaving the pull handle open. Once the carrier is secure in the bay, close the handle until it latches shut. 2.3.3. Reversing the front door (optional) Step 1 – Open front door and press in carefully on the two latches highlighted above. 13
Inhaltszusammenfassung zur Seite Nr. 14
Obsidian Series 800D USER MANUAL Step 2 – Relocate the door as seen here, holding both latches until lined up with the appropriate holes. 2.4. How to install a hard drive into the lower 3.5” drive bays Step 1 - With the front panel of the case removed (see 2.2.1), simultaneously press the top and bottom tabs of the lower hard drive bay cover plate. 14
Inhaltszusammenfassung zur Seite Nr. 15
Obsidian Series 800D USER MANUAL Step 2 - Use the included drive rails, one per side, as pictured above. Step 3 - Once the drive rails are installed on the drive, slide it into the bay until it clicks in place and is secure. Step 4 - Re-attach the drive bay cover plate as shown. 15
Inhaltszusammenfassung zur Seite Nr. 16
Obsidian Series 800D USER MANUAL 2.5. How to use the CPU heatsink backplate door Step 1 – Gently press on the tab and pull the CPU heatsink backplate door downwards. Step 2 – Once you have successfully installed your heatsink, simply lift the door up and press until it latches shut. 16
Inhaltszusammenfassung zur Seite Nr. 17
Obsidian Series 800D USER MANUAL 2.6. How to install an optical drive Step 1 – Remove the front panel from the case (see 2.2.1). Step 2 – Decide which bay you will use and remove the corresponding front drive bay cover from the front panel. Step 3 – Slide your optical drive into the appropriate bay. 17
Inhaltszusammenfassung zur Seite Nr. 18
Obsidian Series 800D USER MANUAL Step 4 – When the screw hole lines up as shown below, push the latch forward until it locks, then re-install the case front panel as in 2.2.2. 2.7. How to install the motherboard Step 1 – Determine what type of motherboard you have and install the black colored copper standoffs appropriately. (NOTE: standoffs may be pre-installed for some common board layouts) 18
Inhaltszusammenfassung zur Seite Nr. 19
Obsidian Series 800D USER MANUAL Step 2 – Place the I/O plate in the rear of the case. (This is provided by the motherboard manufacturer). Step 3 – Line up the motherboard with the I/O shield and the mounting holes, and use the screws provided to secure the motherboard into the case. 19
Inhaltszusammenfassung zur Seite Nr. 20
Obsidian Series 800D USER MANUAL 2.8. How to install the power supply Place the power supply in the bottom power supply bay and install the screws as shown. 2.9. How to remove or add case fans 2.9.1. 140mm HDD Bay fan Step 1 - Remove the plastic cover from the side of the hot-swap drive bay. 20