Bedienungsanleitung Antec SOLUTION SLK2650-BQE

Inhaltszusammenfassung zur Seite Nr. 1

SLK2650-BQE
User’s Manual
Manuel de l’utilisateur
Anwenderhandbuch
Manuale per l’operatore
Manual del usuario

Inhaltszusammenfassung zur Seite Nr. 2

At Antec, we continually refine and improve our products to ensure the highest Installing the Motherboard quality. So it's possible that your new case may differ slightly from the descriptions This manual does not cover CPU, RAM, or expansion card installation. Please in this manual. This isn't a problem; it's simply an improvement. As of the date consult your motherboard manual for specific mounting instructions and of publication, all features, descriptions, and illustrations in this manual ar

Inhaltszusammenfassung zur Seite Nr. 3

connectors to the appropriate headers on your motherboard. You can use 6. For each hard drive or other internal 3.5" device you've installed, find a the LED I and LED II connectors as you see fit; as SCSI LED, Message LED, large 4-pin peripheral connector on the power supply and connect it to the etc. or any other function supported by your motherboard, expansion cards, male 4-pin connector on the 3.5" device. and peripherals. Installing 5.25" Devices Connecting the USB Ports 1. You'll find fo

Inhaltszusammenfassung zur Seite Nr. 4

recommend that you also install a NoiseKiller™ 80 kit. The rear fan is installed so that the air blows out of the case. Find a large 4-pin peripheral connector on the power supply and connect it to the male 4-pin connector on the fan. The front fan (optional) should be installed so that the air is blowing into the case from the front. To install it: Figure 3 1. Release the fan cage by squeezing the tabs. 2. Put the fan in the cage and push it into place until it snaps tight. 3. Snap the fan