Inhaltszusammenfassung zur Seite Nr. 1
KRU PS
Model
Espresso Vivo
Instructions
for Use
Warranty
Guarantee of
Performance
#887
Inhaltszusammenfassung zur Seite Nr. 2
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following: 0 Read all instructions and information in this instruction book and any other literature included in this carton referring to this product before operating or using this appliance. 0 Do not touch hot surfaces. Use handles or knobs. 0 To protect against fire, electric shock and personal injury do n
Inhaltszusammenfassung zur Seite Nr. 3
0 Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to “off“, then remove plug from wall outlet. 0 This appliance is for household use only. Any servicing other than cleaning should be performed by your local authorized KRUPS Service 0 Appliances with Glass Containers. A. The container is designed for use with this appliance. It must never be used on a range top. B. Do not set a hot container on a wet or cold surface. C. Do not use a crac
Inhaltszusammenfassung zur Seite Nr. 4
This appliance is for household use. Any servicing other than cleaning and user maintenance should be performed by the nearest authorized KRUPS Service Center (see Guarantee of Performance). Do not immerse base in water. To reduce the risk of fire or electric shock, do not remove the base. No user parts inside. Repair should be done by an authorized KRUPS Service Center SPECIAL CORD SET INSTRUCTIONS Regarding your cord set: A. A short power-supply cord is provided to reduce risks resulting from
Inhaltszusammenfassung zur Seite Nr. 5
Krups Espresso Vivo i k I m n a: Hinged water chamber lid i: Removable drip tray b: Removable water reservoir j: Pump switch E c: Steam knob k: Thermostat indicator (yellow) ON/OFF indicator (red) d: Water level indicator e: Steam nozzle m: ON/OFF switch n: Cord storage f: Perfect Froth attachment o: 1 and 2 cup filter baskets g: Filter holder h: Removable overflow grid p: Measuring spoon I:
Inhaltszusammenfassung zur Seite Nr. 6
5 1
Inhaltszusammenfassung zur Seite Nr. 7
16
Inhaltszusammenfassung zur Seite Nr. 8
J 22 A f B I c
Inhaltszusammenfassung zur Seite Nr. 9
Your “Espresso Wvo” Features n for the First lime We recommend that you get familiar with all the parts of your “Espresso Vivo” before crema-laden espresso. n Ready Light / Thermostat Indicators the water reservoir. Wipe off the steam nozzle and “Perfect Froth” attachment with a w Water Reservoir large capacity water container is easy to fill for continuous cups of espresso, cappuccino and lattes. When using your “Espresso Vivo” for the first time we recommend running water n “Perfect Froth” At
Inhaltszusammenfassung zur Seite Nr. 10
Step 2 H into the brewing head. Do this by raising and delicious. Most people find they enjoy it 45 degree angle (figure 4). in small quantities because of its richness H Place at least a 5 oz. cup directly under and for that reason, espresso is usually the filter holder (see figure 5). served in small oz. demitassse cups. n Make sure the pump switch is in the ‘off” position. Using the ON/OFF button, turn “on” the appliance fig. 6 & “Crema”, found on top of the surface of the coffee. Your “Esp
Inhaltszusammenfassung zur Seite Nr. 11
water reservoir, using another receptacle to fill the container. espresso, be sure to position two cups Q ’ the water reservoir is least a 5 oz. capacity. n As soon as the yellow thermostat light goes out, set the pump switch to the B run when the water reservoir is empty, remove the filter holder from the machine n Set the pump switch to the “off” position and turn the unit “on” (figures 6 & 7). H is ready for use. If you wish to continue making espresso, appliance. Choose the desired filter ba
Inhaltszusammenfassung zur Seite Nr. 12
n NOTE: figure 17). Do not bring milk to a boil (this will happen KRUPS “Perfect Froth” attachment lets you froth milk perfectly for making cappuccino. touch the bottom of the pitcher. This will prevent you from frothing.the milk. Frothing Milk for Cappuccino Step 4 The first step in making is to been turned to the 0 position. This will make espresso. See section “Preparing prevent any splattering from Espresso”. When preparing cappuccino use a cappuccino cup which has a capacity of at least
Inhaltszusammenfassung zur Seite Nr. 13
This process cools the machine sufficiently to prepare additional cups of espresso. Use caution when removing the “Perfect Heating Liquids Froth” from the steaming nozzle as it may The steam nozzle can also be used to heat liquids, without frothing, such as tea and instant soup. To heat liquids: Use caution when cleaning or removing the Set the pump switch to the off position. steaming nozzle as it may still be hot. “Perfect Froth” attachment Cleaning the Machine water reservoir n After preparin
Inhaltszusammenfassung zur Seite Nr. 14
(This may happen after a long period of use). This part can be ordered through Under normal conditions you do not need to decalcify your “Espresso Vivo”. However, in areas where there is hard water or if you If the seal has lost its elasticity, it must be use your machine very frequently we replaced with a new one. Allow the recommend decalcifying. You will know when such a cleaning is necessary by an purchased through KRUPS Consumer Service Department. How To Decalcify n Before beginning, it is
Inhaltszusammenfassung zur Seite Nr. 15
The pitcher that you are using is not a stainless steel frothing pitcher.) Cold conducts better to metal than to glass or plastic. The type of milk is not suitable. _ . Your KRUPS is covered by the following warranty: KRUPS product fails to function because of defects in materials or workmanship, repair or replace the unit without charge, accident, misuse, use on frequency or and/or described in the instructions, abuse use for commercial purposes. This warranty gives you specific legal rights,
Inhaltszusammenfassung zur Seite Nr. 16
GUARANTEE OF-PERFORMANCE code of quality standards, and, with minimum care, should give years of satisfying service. However, should the need arise for repairs or for replacement parts within or after the warrantvoeriod, DEPARTMENT: (800) 526-5377 a day, 7 days a week You will be provided with specific instruction on how to get your product repaired, as well as the name and address of your nearest authorized KRUPS Service Center. The department will also be able to answer any general product qu
