Bedienungsanleitung Desa FG30PT

Bedienungsanleitung für das Gerät Desa FG30PT

Gerät: Desa FG30PT
Kategorie: Gasheizung
Produzent: Desa
Größe: 1.3 MB
Datum des Hinzufügens: 6/23/2014
Seitenanzahl: 32
Anleitung drucken

Herunterladen

Wie kann man es nutzen?

Unser Ziel ist Ihnen einen schnellen Zugang zu Inhalten in Bedienungsanleitungen zum Gerät Desa FG30PT zu garantieren. Wenn Sie eine Online-Ansicht nutzten, können Sie den Inhaltsverzeichnis schnell durchschauen und direkt zu der Seite gelangen, auf der Sie die Lösung zu Ihrem Problem mit Desa FG30PT finden.

Für Ihre Bequemlichkeit

Wenn das direkte Durchschauen der Anleitung Desa FG30PT auf unserer Seite für Sie unbequem ist, können sie die folgende zwei Möglichkeiten nutzen:

  • Vollbildsuche – Um bequem die Anleitung durchzusuchen (ohne sie auf den Computer herunterzuladen) können Sie den Vollbildsuchmodus nutzen. Um das Durchschauen der Anleitung Desa FG30PT im Vollbildmodus zu starten, nutzen Sie die Schaltfläche Vollbild
  • Auf Computer herunterladen – Sie können die Anleitung Desa FG30PT auch auf Ihren Computer herunterladen und sie in Ihren Sammlungen aufbewahren. Wenn Sie jedoch keinen Platz auf Ihrem Gerät verschwenden möchten, können Sie sie immer auf ManualsBase herunterladen.
Desa FG30PT Handbuch - Online PDF
Advertisement
« Page 1 of 32 »
Advertisement
Druckversion

Viele Personen lesen lieber Dokumente nicht am Bildschirm, sondern in gedruckter Version. Eine Druckoption der Anleitung wurde ebenfalls durchdacht, und Sie können Sie nutzen, indem Sie den Link klicken, der sich oben befindet - Anleitung drucken. Sie müssen nicht die ganze Desa FG30PT Anleitung drucken, sondern nur die Seiten, die Sie brauchen. Schätzen Sie das Papier.

Zusammenfassungen

Unten finden Sie Trailer des Inhalts, der sich auf den nächsten Anleitungsseiten zu Desa FG30PT befindet. Wenn Sie den Seiteninhalt der nächsten Seiten schnell durchschauen möchten, können Sie sie nutzen.

Inhaltszusammenfassungen
Inhaltszusammenfassung zur Seite Nr. 1

UNVENTED (VENT-FREE) BLUE FLAME GAS GARAGE HEATER
SAFETY INFORMATION AND INSTALLATION MANUAL
BG30N, BG30NT, BG30P, BG30PT, FG30N, FG30NT, FG30P,
FG30PT, GG30N, GG30NT, GG30P, GG30PT, RG30N, RG30NT,
RG30P, RG30PT, GMG30N, GMG30NT, GMG30P, GMG30PT
WARNING: If the information in this manual is not fol-
lowed exactly, a fire or explosion may result causing
property damage, personal injury or loss of life.
— Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this

Inhaltszusammenfassung zur Seite Nr. 2

WARNING: Improper installation, adjustment, altera- tion, service or maintenance can cause injury or prop- erty damage. Refer to this manual for correct installation and operational procedures. For assistance or addi- tional information consult a qualified installer, service agency or the gas supplier. WARNING: This is an unvented gas-fired heater. It uses air (oxygen) from the room in which it is installed. Provi- sions for adequate combustion and ventilation air must be provided. Refer to Ai

Inhaltszusammenfassung zur Seite Nr. 3

SAFETY INFORMATION Do not place clothing or other flammable material on or near IMPORTANT: Read this owner’s the appliance. Never place any manual carefully and completely objects on the heater. before trying to assemble, operate or service this heater. Surface of heater becomes very Improper use of this heater can hot when running heater. Keep cause serious injury or death children and adults away from from burns, fire, explosion, hot surface to avoid burns or electrical shock and

Inhaltszusammenfassung zur Seite Nr. 4

SAFETY INFORMATION PRODUCT Continued IDENTIFICATION 6. Keep all air openings in front and bottom of Control Knob Heater heater clear and free of debris. This will insure Ignitor Button Cabinet enough air for proper combustion. 7. If heater shuts off, do not relight until you provide fresh, outside air. If heater keeps shutting off, have it serviced. 8. Do not run heater • where flammable liquids or vapors are used or stored • under dusty conditions 9. Before using furniture polish, wax, ca

Inhaltszusammenfassung zur Seite Nr. 5

Unusually tight construction is defined as AIR FOR COMBUSTION construction where: AND VENTILATION a. walls and ceilings exposed to the out- side atmosphere have a continuous WARNING: This heater shall water vapor retarder with a rating of not be installed in a confined -11 2 one perm (6x10 kg per pa-sec-m ) or space or unusually tight con- less with openings gasketed or sealed struction unless provisions are and b. weather stripping has been added on provided for adequate combus- openabl

Inhaltszusammenfassung zur Seite Nr. 6

4. Compare the maximum Btu/Hr the space can AIR FOR COMBUSTION support with the actual amount of Btu/Hr used. AND VENTILATION _______________Btu/Hr (maximum the space Continued can support) _______________Btu/Hr (actual amount of DETERMINING FRESH-AIR FLOW Btu/Hr used) FOR HEATER LOCATION Example: Determining if You Have a Confined or 51,200 Btu/Hr (maximum the space can support) Unconfined Space 70,000 Btu/Hr (actual amount of Btu/Hr used) Use this work sheet to determine if

Inhaltszusammenfassung zur Seite Nr. 7

AIR FOR COMBUSTION Ventilated AND VENTILATION Outlet Attic Air Continued Outlet VENTILATION AIR Air To Attic Ventilation Air From Inside Building This fresh air would come from an adjoining un- To Crawl confined space. When ventilating to an adjoining Space Inlet unconfined space, you must provide two perma- Air nent openings: one within 12” of the ceiling and Ventilated Inlet Air Crawl Space one within 12” of the floor on the wall connecting the two spaces (see options 1 and 2, Figure 2).

Inhaltszusammenfassung zur Seite Nr. 8

INSTALLATION CAUTION: This heater cre- Continued ates warm air currents. These INSTALLATION ITEMS currents move heat to wall sur- Before installing heater, make sure you have the faces next to heater. Installing items listed below. heater next to vinyl or cloth wall • for propane/LP gas, external regulator (supplied coverings or operating heater by installer) where impurities (such as, but • piping (check local codes) not limited to, tobacco smoke, • sealant (resistant to propane/LP gas

Inhaltszusammenfassung zur Seite Nr. 9

INSTALLATION Continued THERMOSTAT SENSING BULB (Thermostat Models Only) The thermostat sensing bulb has been placed below the heater. 1. Place clamp on thermostat sensing bulb as shown in Figure 5. Clamp is provided in hardware package. 2. Snap clamp into upper mounting hole as shown in Figure 5. Mounting hole is located on lower left edge on back of heater. Make sure the thermostat sensing bulb is pointing up. Figure 7 - Removing Front Panel Of Heater Methods For Attaching Mounting Br

Inhaltszusammenfassung zur Seite Nr. 10

Attaching To Wall Anchor Method INSTALLATION For attaching mounting bracket to hollow walls Continued (wall areas between studs) or solid walls (concrete 2. Mark screw locations on wall (see Figure 8). or masonry) Note: Only mark last hole on each end of 1. Drill holes at marked locations using 5/16" mounting bracket. Insert mounting screws drill bit. For solid walls (concrete or masonry), through these holes only. drill at least 1" deep. 3. Remove tape and mounting bracket from 2. Fold

Inhaltszusammenfassung zur Seite Nr. 11

INSTALLATION Continued Installing Bottom Mounting Screws 1. Locate two bottom mounting holes. These holes are near bottom on back panel of heater (see Figure 12). 2. Mark screw locations on wall. 3. Remove heater from mounting bracket. 4. If installing bottom mounting screws into Front View hollow or solid wall, install wall anchors. Follow steps 1 through 4 under Attaching To Wall Anchor Method, page 10. Heater Wall If installing bottom mounting screw into wall stud, drill holes at marke

Inhaltszusammenfassung zur Seite Nr. 12

INSTALLATION CAUTION: Use only new, Continued black iron or steel pipe. Inter- CONNECTING TO GAS SUPPLY nally-tinned copper tubing may be used in certain areas. Check WARNING: This appliance your local codes. Use pipe of requires a 3/8" NPT (National large enough diameter to allow Pipe Thread) inlet connection to proper gas volume to heater. If the pressure regulator. pipe is too small, undue loss of volume will occur. WARNING: A qualified ser- vice person must connect heater Typica

Inhaltszusammenfassung zur Seite Nr. 13

INSTALLATION WARNING: Never use an Continued open flame to check for a leak. IMPORTANT: Hold the pressure regulator with Apply a noncorrosive leak detec- wrench when connecting it to gas piping and/or tion fluid to all joints. Bubbles fittings. Do not over tighten pipe connection to forming show a leak. Correct all regulator. The regulator body could be damaged. leaks at once. Pressure Regulator Heater CAUTION: For propane/LP Cabinet gas, make sure external regula- tor has been install

Inhaltszusammenfassung zur Seite Nr. 14

Thermostat Gas Valve INSTALLATION Continued 2. Pressurize supply piping system by either opening propane/LP supply tank valve for Gas propane/LP gas or opening main gas valve Meter located on or near gas meter for natural gas or using compressed air. 3. Check all joints from gas meter for natural gas (see Figure 17) or propane/LP supply tank for propane/LP gas, to equipment shutoff valve (see Figure 18). Apply a noncorrosive leak detection fluid to all joints. Bubbles forming Equipment S

Inhaltszusammenfassung zur Seite Nr. 15

5. Press in control knob and turn counter- OPERATING HEATER clockwise to the PILOT position. MANUAL CONTROL MODELS Keep control knob pressed in for five (5) seconds (see Figure 19). FOR YOUR SAFETY Note: You may be running this heater for READ BEFORE LIGHTING the first time after hooking up to gas sup- ply. If so, the control knob may need to be pressed in for 30 seconds or more. This will WARNING: If you do not fol- allow air to bleed from the gas system. low these instructions exactly,

Inhaltszusammenfassung zur Seite Nr. 16

WHAT TO DO IF YOU SMELL GAS OPERATING HEATER • Do not try to light any appliance. Continued • Do not touch any electric switch; do not TO TURN OFF GAS use any phone in your building. TO APPLIANCE • Immediately call your gas supplier from a neighborʼs phone. Follow the gas Shutting Off Heater supplierʼs instructions. 1. Press in and turn control knob clockwise • If you cannot reach your gas supplier, call to the PILOT position. the fire department. 2. Turn control knob clockwise to the C

Inhaltszusammenfassung zur Seite Nr. 17

TO TURN OFF GAS OPERATING HEATER TO APPLIANCE Continued Shutting Off Heater 6. With control knob pressed in, push down 1. Turn control knob clockwise to the and release ignitor button. This will light OFF position. pilot. The pilot is attached to the front of burner. The pilot is attached to the front of 2. Turn off all electric power to the appliance the burner. If needed, keep pressing ignitor if service is to be performed. button until pilot lights. Shutting Off Burner Only (pilot stay

Inhaltszusammenfassung zur Seite Nr. 18

BURNER FLAME PATTERN INSPECTING HEATER Check pilot flame pattern and burner flame pat- WARNING: If yellow tipping tern often. occurs, your heater could pro- PILOT FLAME PATTERN duce increased levels of carbon Figure 23 shows a correct pilot flame pattern. monoxide. Figure 24 shows an incorrect pilot flame pattern. The incorrect pilot flame is not touching the NOTICE: Do not mistake orange thermocouple. This will cause the thermocouple to cool. When the thermocouple cools, the heater flames wi

Inhaltszusammenfassung zur Seite Nr. 19

1. Shut off the unit, including the pilot. Allow CLEANING AND the unit to cool for at least thirty minutes. MAINTENANCE 2. Inspect burner, pilot for dust and dirt. 3. Blow air through the ports/slots and holes in WARNING: Turn off heater the burner. and let cool before cleaning. 4. Never insert objects into the pilot tube. Clean the pilot assembly also. A yellow tip on the CAUTION: You must keep - pilot flame indicates dust and dirt in the pilot as sembly. There is a small pilot air inlet

Inhaltszusammenfassung zur Seite Nr. 20

TROUBLESHOOTING WARNING: Turn off and unplug heater and let cool before servicing. Only a qualified service person should service and repair heater. CAUTION: Never use a wire, needle or similar object to clean ODS/pilot. This can damage ODS/pilot unit. Note: All troubleshooting items are listed in order of operation. OBSERVED PROBLEM POSSIBLE CAUSE REMEDY When ignitor button is pressed, 1. Ignitor electrode positioned 1. Replace pilot assembly there is no spark at ODS/pilot wrong 2. Ignitor


Ähnliche Anleitungen
# Bedienungsanleitung Kategorie Herunterladen
1 Desa 125-R Handbuch Gasheizung 0
2 Desa BG30P Handbuch Gasheizung 0
3 Desa 30-80 Handbuch Gasheizung 0
4 Desa 75-200 Handbuch Gasheizung 0
5 Desa BG30N Handbuch Gasheizung 0
6 Desa BG30NT Handbuch Gasheizung 0
7 Desa BCLP375 Handbuch Gasheizung 0
8 Desa BG30PT Handbuch Gasheizung 0
9 Desa 125-RN Handbuch Gasheizung 0
10 Desa BLP35E Handbuch Gasheizung 0
11 Desa BVDR18 Handbuch Gasheizung 1
12 Desa BVDR24 Handbuch Gasheizung 0
13 Desa BVDR30 Handbuch Gasheizung 0
14 Desa BVSR18 Handbuch Gasheizung 0
15 Desa CB36N Handbuch Gasheizung 0
16 Allied Air Enterprises 506271-01 Handbuch Gasheizung 0
17 Blue Rhino ALL WEATHER WOVEN HEATER GWU9850F / 35554 Handbuch Gasheizung 2
18 Breckwell ECONOMY P22FSL Handbuch Gasheizung 0
19 Breckwell ECONOMY P22FSA Handbuch Gasheizung 0
20 Breckwell ECONOMY P22I Handbuch Gasheizung 1