Inhaltszusammenfassung zur Seite Nr. 5
Assembly Make sure lid edges are under the cover tabs (J). 1. Slide receptacle supports (marked L (left) and R (right)) into grooves on the bottom tray until they lock into place (A). 9. Install carbon filter. • Peel off the paper strip on the carbon filter to expose the adhesive. A J • Place filter adhesive-side down in the diamond-shaped insert 2. Place both left and right flaps flat on top of the waste in the center of the waste receptacle lid (K). Close the waste receptacle compartme
Inhaltszusammenfassung zur Seite Nr. 6
Install rake Sensors 12. Align tracks on back of rake (each end) and slide into Sensors (located on interior side panels) must be kept clean. grooves on motor housing (R). Wipe sensors with a soft, dry cloth to keep them dust free (U). R U 13. Remove the AC adapter from where it is packed in the styrofoam and plug it into the unit (S). LED operation, function and why they blink: • Plug the cord into a standard electrical wall outlet. • Press the ON/OFF button to turn unit ON. The ra
Inhaltszusammenfassung zur Seite Nr. 7
Rake Removal & Cleaning Care and Cleaning Removing the rake: Sensor Covers The rake can be removed for easy cleaning. The two sensors located on the interior side panels are protected by sensor covers We recommend wearing rubber or latex gloves when handling the soiled rake. that need to be kept dust free. After changing or adding litter, wipe each sensor with a soft, dry cloth to remove dust. • Be sure rake is in the home position. Litter Tray • Grasp rake ledge underneath logo and
Inhaltszusammenfassung zur Seite Nr. 8
Unit does not completely clean litter box. Troubleshooting Probable Cause: Rake continues to go through cleaning cycles. • Low-quality clumping litter. Probable Cause: Solution: • Too much litter in the litter box is causing excess litter to collect behind the rake, preventing it from returning to home position or there is an 1. Do not use non-clumping, crystal or pearl-like litter. obstacle in front at the rake. If the rake cannot move an obstacle during the cleaning cycle, the
Inhaltszusammenfassung zur Seite Nr. 9
5. If unit does not operate with fresh batteries, try it with the AC adapter. Probable Cause: 6. Green light should come on. If it does not, there is a problem with the AC • Power outage or batteries are incorrectly installed or dead. adapter or batteries. Solution: Probable Cause: Press ON/OFF button 1. OFF then back ON. • AC adapter does not work. 2. Make sure there is power to the unit and/or fresh batteries are correctly Solution: installed. Press ON/OFF button OFF and check the
Inhaltszusammenfassung zur Seite Nr. 10
NEED HELP? Solution: For service, repair or any questions regarding your appliance, call the appropriate "800" number on the cover of this book. Do not return the product to the place Press ON/OFF button 1. OFF. of purchase. Do not mail the product back to the manufacturer nor bring it to a service center. You may also want to consult the website listed on the cover of 2. Unplug unit. this manual. One-Year Limited Warranty 3. Remove batteries. (Applies only in the United States and
Inhaltszusammenfassung zur Seite Nr. 11
Copyright © 2008 Applica Consumer Products, Inc. Made in People’s Republic of China Printed in People’s Republic of China R22006/10-18-55E WIN
Inhaltszusammenfassung zur Seite Nr. 1
Please Read and Save this Use and Care Book
R e g i s t e r y o u r p r o d u c t o n l i n e a t w w w . p r o d p r o t e c t . c o m / a p p l i c a ,
f o r a c h a n c e t o W I N $ 1 0 0 , 0 0 0 !
F o r U S r e s i d e n t s o n l y
U S A / C a n a d a 1 - 8 0 0 - L I T M A I D
(548-6243)
M o d e l
www.littermaid.com
❑
L M E 5 0 0 0
Accessories/Parts (USA/Canada)
1-800-738-0245
Inhaltszusammenfassung zur Seite Nr. 2
IMPORTANT SAFEGUARDS WELCOME TO THE FAMILY! Instructions pertaining to a risk of fire, electric shock or injury to persons. ™ Congratulations on your purchase of the LitterMaid Elite Advanced WARNING: When using electric appliances, basic precautions should always Automatic Self-Cleaning Litter Box. This product is designed to make caring be followed including the following: for your cat a simpler, less time-consuming process. Warning: Do not stick hands or any other ex
Inhaltszusammenfassung zur Seite Nr. 3
Product may vary slightly from what is illustrated. Accessories 5 7 7 6 4 8 3 9 2 10 6 1 1 16 3 2 11 14 15 5 12 13 4 † 1. Plugs (4) (not shown) 1. ON/OFF button Plug 1 (Part# 7003-3320W , (qty. 2)) Plug 2 (Part# 03-4320W (qty. 2)) 2. Power light indicator † 2. Cleaning brush (Part# 5125-0075W ) 3. Warranty board † 3. AC adapter (Part# 4101-1022W) ® † 4. Battery compartment cover (Part# 7688-9320W) (batteries not included)
Inhaltszusammenfassung zur Seite Nr. 4
Setup Instructions Accessories No Tools Required for Setup Check our online service for parts and accessories at www.littermaid.com • Unpack the pieces of the unit listed below. or call 1-800-548-6243 • Peel off the protective tape on the battery compartment. Model # • Cut or remove the tie restraints on the underside of unit. ™ LitterMaid Kitty Kabana litter box cover LMT200 • Before use, remove the tie wraps on each end of the motor assembly. ™ LitterMaid Elite li
