Inhaltszusammenfassung zur Seite Nr. 1
222
WELLS MANUFACTURING COMPANY
2 ERIK CIRCLE, P. O. Box 280
Verdi, NV 89439
Customer Service (775) 345-0444 Ext.502
fax: (775) 345-0569
www.wellsbloomfield.com
OPERATION MANUAL
for
BUILT-IN
ELECTRIC HOTPLATES
Models: H-336, H-636 and H-706
Includes
INSTALLATION
USE & CARE
Model H-6 36
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING
Inhaltszusammenfassung zur Seite Nr. 2
LIMITED WARRANTY STATEMENT Unless otherwise specified, all commercial cooking equip- thorized personnel. The prices charged by Wells Mfg. Co. ment manufactured by WELLS MFG. CO. is warranted for its products are based upon the limitations in this war- against defects in materials and workmanship for a period of ranty. Seller’ s obligation under this warranty is limited to the one year from the date of original installation or 18 months repair of defects without charge by a Wells Mfg. Co. fac
Inhaltszusammenfassung zur Seite Nr. 3
TABLE OF CONTENTS WARRANTY xi SPECIFICATIONS 1 FEATURES & OPERATING CONTROLS 2 PRECAUTIONS & GENERAL INFORMATION 3 AGENCY APPROVAL INFORMATION 3 INSTALLATION 4 OPERATION 5 CLEANING INSTRUCTIONS
Inhaltszusammenfassung zur Seite Nr. 4
FEATURES & OPERATING CONTROLS Heating E lem en t Support E lem ent Drip Pan Heatin g E lem ent (Lifted) Nam e Plate W ellslok Indicator Hotp late Un it Light Tem p erature Control Un it Con trol Fig. 1 Built- I n E lectric Hotp late - Features & Op eratin g Controls HOTPLATE UNIT: n Heating Element Provides heat for food preparation Coil-type elements rotate for access to drip pan
Inhaltszusammenfassung zur Seite Nr. 5
PRECAUTIONS AND GENERAL INFORMATION This appliance is intended for use in commercial establishments only. WARNING: Electric This appliance is intended to prepare food for human consumption. Shock hazard No other use is recommended or authorized by the manufacturer or its agents. All servicing requiring access to non-insulated Operators of this appliance must be familiar with the appliance use, electrical components limitations and associated restrictions. Operating instruc
Inhaltszusammenfassung zur Seite Nr. 6
INSTALLATION NOTE: DO NOT discard UNPACKING & INSPECTION the carton or other packing Carefully remove the hotplate from the carton. Remove all materials until you have protective plastic film, packing materials and accessories from the inspected the appliance for hotplate before connecting the hotplate to electrical power or other- hidden damage and tested it wise performing any installation procedure. for proper operation. Refer to SHIPPING DAMAGE Carefully read all instructio
Inhaltszusammenfassung zur Seite Nr. 7
4 3 2 LO OPERATION GENERAL OPERATIONAL NOTES CAUTION: Hot Surface Carefully read the description of the hotplate operation on the specification sheet. Exposed surfaces can be hot to the touch DO NOT attempt to perform any maintenance or service unless the and may cause burns. hotplate is disconnected from electrical power. DO turn the circuit breaker for the hotplate off before cleaning, servicing or performing any maintenance. DO NOT use sharp objects or metal implem
Inhaltszusammenfassung zur Seite Nr. 8
CLEANING INSTRUCTIONS CAUTION: PREPARATION Electric Shock Unplug or disconnect hotplate from electrical power before cleaning. Hazard Allow hotplate to cool completely before cleaning. Disconnect hotplate from FREQUENCY electric power before Daily cleaning. TOOLS Plastic Spatula and Plastic Scouring Pad CAUTION: Clean Cloth or Sponge Burn Hazard Mild Detergent or Cleaner Formulated for Stainless Steel Allow hotplate element Warm Water and cabinet to cool comp
Inhaltszusammenfassung zur Seite Nr. 9
TROUBLESHOOTING SYMPTOM POSSIBLE CAUSE SUGGESTED REMEDY Hotplate won’ t heat Disconnect OFF or circuit breaker Turn disconnect ON tripped Check / reset circuit breaker One or more sections Temperature control not on Turn temperature control to won’ t heat desired setting Damaged temperature control, Contact Authorized Wells element or other internal component Service Agency for repairs Hotplate not hot enough Temperature control not set Adjust for desired temperature
Inhaltszusammenfassung zur Seite Nr. 10
THIS PAGE BLANK 8
Inhaltszusammenfassung zur Seite Nr. 11
PARTS & SERVICE DESCRIPTION SERVICE IMPORTANT: Use only PART NO. factory authorized service parts. Drip Tray, 8” for H-636 21705 For factory authorized service, or to order factory Element Support, H-636, H-656 500039 authorized replacement parts, contact your Wells authorized service agency, or call:
Inhaltszusammenfassung zur Seite Nr. 12
