Inhaltszusammenfassung zur Seite Nr. 1
®
Model No. 831.150721
Serial No.
USER’S MANUAL
Write the serial number in the
space above for future reference.
Serial Number Decal (Under Seat)
SEARS, ROEBUCK AND CO.,
HOFFMAN ESTATES, IL 60179
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before using www.weiderfitness.com
this equipment. Save this manual
new products, prizes,
for future reference.
fitness tips, and much more!
Inhaltszusammenfassung zur Seite Nr. 2
TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 PART IDENTIFICATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read the following important precautions before using the weight bench. 1. Read all instructions in this manual before 11. The weight bench is designed to support a using the weight bench. Use the weight maximum of 460 pounds, including the user, bench only as described in this manual. a weight bar, and weights. Do not place more than 210 pounds, including a weight bar and 2. It is the responsibility of the owner to ensure weig
Inhaltszusammenfassung zur Seite Nr. 4
BEFORE YOU BEGIN ® Thank you for selecting the WEIDER 400 weight at 1-800-736-6879, Monday through Saturday, 7 a.m. ® bench. The versatile WEIDER 400 is designed to be until 7 p.m. Central Time (excluding holidays). To help used with your own weight set (not included) to devel- us assist you, please note the product model number op every major muscle group of the body. Whether and serial number before calling. The model number is your goal is a shapely figure, dramatic muscle size 831.150721. Th
Inhaltszusammenfassung zur Seite Nr. 5
PART IDENTIFICATION CHART This chart is provided to help you identify the small parts used in assembly. The number in parenthesis below each part refers to the key number of the part from the PART LIST on page 14 of the this manual. Important: Some parts may have been pre-assembled for shipping purposes. If you cannot find a part in the parts bags, check to see if it has been pre-assembled. M8 x 65mm Bolt (20) M10 Nylon Locknut (27) M10 x 60mm Bolt (21) M8 Nylon Locknut (24) M8 x 55mm Bolt (18)
Inhaltszusammenfassung zur Seite Nr. 6
ASSEMBLY • As you assemble the weight bench, make sure all Make Things Easier for Yourself parts are oriented as shown in the drawings. Everything in this manual is designed to ensure • For help identifying small parts, use the PART that the weight bench can be assembled suc- IDENTIFICATION CHART on page 5. cessfully by anyone. However, it is important to realize that the versatile weight bench has many The following tools (not included) are required parts and that the assembly process will ta
Inhaltszusammenfassung zur Seite Nr. 7
3. Attach the Crossbars (2, 3) to the Uprights (1) 3 with four M8 x 65mm Bolts (20), two Support Plates (10), and four M8 Nylon Locknuts (24). Do not tighten the Nylon Locknuts yet. Note the 1 position of the name decal and make sure the Uprights are oriented as shown. 1 24 Name 20 Decal 3 10 20 10 24 2 20 24 4. Press a 25.4mm Round Inner Cap (15) into the 4 27 indicated end of the Weight Tube (31). Slide the Weight Tube through the hole in the Leg Lever (6). 17 Attach the Weight Tube with an M
Inhaltszusammenfassung zur Seite Nr. 8
6. Press two 25.4mm Inner Caps (15) into the ends 6 of the Support Rod (11). Slide the Support Rod through a set of holes in the Uprights (1) and turn it to the locked position. 1 15 See the inset drawing. With the help of a sec- 1 11 ond person, slide the indicated ends of the Backrest Tubes (7) onto the welded axle on the Frame (4). Attach the left Backrest Tube (7) to the Backrest (8) with a fourth M6 x 38mm Screw (23) and M6 Washer (25). Tighten all four Screws in the 8 15 Backrest. Rest th
Inhaltszusammenfassung zur Seite Nr. 9
ADJUSTMENTS The weight bench is designed to be used with your own weight set (not included). The steps below explain how the weight bench can be adjusted. See EXERCISE GUIDELINES on page 10 for important exercise information and refer to the accompanying exercise guide to see the correct form for several exercises. Refer also to the exercise information accompanying your weight set (not included) for additional exercises. Inspect and tighten all parts each time you use the weight bench. Replace
Inhaltszusammenfassung zur Seite Nr. 10
EXERCISE GUIDELINES THE FOUR BASIC TYPES OF WORKOUTS PERSONALIZING YOUR EXERCISE PROGRAM Muscle Building Determining the exact length of time for each workout, To increase the size and strength of your muscles, as well as the number of repetitions or sets completed, push them close to their maximum capacity. Your mus- is an individual matter. It is important to avoid overdo- cles will continually adapt and grow as you progres- ing it during the first few months of your exercise pro- sively incre
Inhaltszusammenfassung zur Seite Nr. 11
Rest for a short period of time after each set. The slowly as you stretch and do not bounce. Ease into ideal resting periods are: each stretch gradually and go only as far as you can • Rest for three minutes after each set for a muscle without strain. Stretching at the end of each workout building workout. is an effective way to increase flexibility. • Rest for one minute after each set for a toning work- out. STAYING MOTIVATED • Rest for 30 seconds after each set for a weight loss workout. For
Inhaltszusammenfassung zur Seite Nr. 12
MONDAY EXERCISE WEIGHT SETS REPS Date: / / AEROBIC EXERCISE TUESDAY Date: / / EXERCISE WEIGHT SETS REPS WEDNESDAY Date: / / AEROBIC EXERCISE THURSDAY Date: / / EXERCISE WEIGHT SETS REPS FRIDAY Date: / / Make photocopies of this page for scheduling and recording your workouts. 12
Inhaltszusammenfassung zur Seite Nr. 13
MONDAY EXERCISE WEIGHT SETS REPS Date: / / AEROBIC EXERCISE TUESDAY Date: / / EXERCISE WEIGHT SETS REPS WEDNESDAY Date: / / AEROBIC EXERCISE THURSDAY Date: / / EXERCISE WEIGHT SETS REPS FRIDAY Date: / / Make photocopies of this page for scheduling and recording your workouts. 13
Inhaltszusammenfassung zur Seite Nr. 14
PART LIST—Model No. 831.150721 R0701A Key No. Qty. Description Key No. Qty. Description 1 2 Upright 18 2 M8 x 55mm Bolt 2 1 Left Crossbar 19 4 25.4mm Square Inner Cap 3 1 Right Crossbar 20 6 M8 x 65mm Bolt 4 1 Frame 21 1 M10 x 60mm Bolt 5 1 Front Leg 22 4 M6 x 16mm Screw 6 1 Leg Lever 23 4 M6 x 38mm Screw 7 2 Backrest Tube 24 11 M8 Nylon Locknut 8 1 Backrest 25 4 M6 Washer 9 1 Seat 26 4 M8 Washer 10 2 Support Plate 27 1 M10 Nylon Locknut 11 1 Support Rod 28 2 M8 x 40mm Carriage Bolt 12 4 Foam Pa
Inhaltszusammenfassung zur Seite Nr. 15
EXPLODED DRAWING—Model No. 831.150721 R0701A 19 8 25 19 23 7 7 25 23 1 25 23 25 10 24 19 23 20 9 19 3 20 1 20 18 4 2 20 28 17 24 27 10 12 17 24 24 22 20 12 22 24 6 21 16 24 26 15 26 30 24 31 17 5 11 17 26 29 15 14 14 13 13 14 14 15 12 12 15
Inhaltszusammenfassung zur Seite Nr. 16
ORDERING REPLACEMENT PARTS ® The model number and serial number of your WEIDER 400 are Model No. 831.150721 listed on a decal attached to the frame. See the front cover of this manual to find the location of the decal. QUESTIONS? All replacement parts are available for immediate purchase or special order when you visit your nearest SEARS Service If you find that: Center. To request service or to order parts by telephone, call the toll-free numbers listed at the left. • you need help assembling
