Bedienungsanleitung Troy-Bilt 640C - Tuffy CRT, 644A - Super Bronco CRT

Bedienungsanleitung für das Gerät Troy-Bilt 640C - Tuffy CRT, 644A - Super Bronco CRT

Gerät: Troy-Bilt 640C - Tuffy CRT, 644A - Super Bronco CRT
Kategorie: Steuerknüppel
Produzent: Troy-Bilt
Größe: 5.25 MB
Datum des Hinzufügens: 6/6/2014
Seitenanzahl: 32
Anleitung drucken

Herunterladen

Wie kann man es nutzen?

Unser Ziel ist Ihnen einen schnellen Zugang zu Inhalten in Bedienungsanleitungen zum Gerät Troy-Bilt 640C - Tuffy CRT, 644A - Super Bronco CRT zu garantieren. Wenn Sie eine Online-Ansicht nutzten, können Sie den Inhaltsverzeichnis schnell durchschauen und direkt zu der Seite gelangen, auf der Sie die Lösung zu Ihrem Problem mit Troy-Bilt 640C - Tuffy CRT, 644A - Super Bronco CRT finden.

Für Ihre Bequemlichkeit

Wenn das direkte Durchschauen der Anleitung Troy-Bilt 640C - Tuffy CRT, 644A - Super Bronco CRT auf unserer Seite für Sie unbequem ist, können sie die folgende zwei Möglichkeiten nutzen:

  • Vollbildsuche – Um bequem die Anleitung durchzusuchen (ohne sie auf den Computer herunterzuladen) können Sie den Vollbildsuchmodus nutzen. Um das Durchschauen der Anleitung Troy-Bilt 640C - Tuffy CRT, 644A - Super Bronco CRT im Vollbildmodus zu starten, nutzen Sie die Schaltfläche Vollbild
  • Auf Computer herunterladen – Sie können die Anleitung Troy-Bilt 640C - Tuffy CRT, 644A - Super Bronco CRT auch auf Ihren Computer herunterladen und sie in Ihren Sammlungen aufbewahren. Wenn Sie jedoch keinen Platz auf Ihrem Gerät verschwenden möchten, können Sie sie immer auf ManualsBase herunterladen.
Troy-Bilt 640C - Tuffy CRT, 644A - Super Bronco CRT Handbuch - Online PDF
Advertisement
« Page 1 of 32 »
Advertisement
Druckversion

Viele Personen lesen lieber Dokumente nicht am Bildschirm, sondern in gedruckter Version. Eine Druckoption der Anleitung wurde ebenfalls durchdacht, und Sie können Sie nutzen, indem Sie den Link klicken, der sich oben befindet - Anleitung drucken. Sie müssen nicht die ganze Troy-Bilt 640C - Tuffy CRT, 644A - Super Bronco CRT Anleitung drucken, sondern nur die Seiten, die Sie brauchen. Schätzen Sie das Papier.

Zusammenfassungen

Unten finden Sie Trailer des Inhalts, der sich auf den nächsten Anleitungsseiten zu Troy-Bilt 640C - Tuffy CRT, 644A - Super Bronco CRT befindet. Wenn Sie den Seiteninhalt der nächsten Seiten schnell durchschauen möchten, können Sie sie nutzen.

Inhaltszusammenfassungen
Inhaltszusammenfassung zur Seite Nr. 1

Operator’s Manual
Rear-tine Tiller Models
®
640C— Tuffy CRT
TM
644A — Super Bronco CRT
Model 644A Shown
IMPORTANT: Read safety rules and instructions carefully before operating equipment.
Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-
covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if
any). If a spark arrester is u

Inhaltszusammenfassung zur Seite Nr. 2

TABLE OF CONTENTS Content Page Content Page Customer Support 2 Maintenance 17 Safety 3 Off-season Storage 21 Assembly 6 Troubleshooting 22 Features and Controls 10 Parts List 23 Operation 12 Warranty Back Cover FINDING MODEL NUMBER This Operator’s Manual is an important part of your new lawn tractor. It will help you assemble, prepare and maintain the unit for best performance. Please read and understand what it says. Before you start assembling your new equipment, please locate the model plat

Inhaltszusammenfassung zur Seite Nr. 3

SECTION 1: SAFETY This machine meets voluntary safety stan- dard B71.8 – 1996, which is sponsored by the Outdoor Power Equipment Institute, Inc., and is published by the American National Standards Institute. Forward Clutch Bail Reverse Clutch Control (Models 644A) WARNING Depth Regulator The engine exhaust from this product contains chemicals known to the State of California to Tine Hood Flap cause cancer, birth defects or other reproduc- Safety Alert Symbol This is a safety alert symbol

Inhaltszusammenfassung zur Seite Nr. 4

4. Exercise caution to avoid slipping or fall- If in doubt about the tilling conditions, al- 24. Do not touch engine parts which may ing. ways use the following operating precau- be hot from operation. Let parts cool down tions to assist you in maintaining control sufficiently. 5. If the unit should start to vibrate abnor- of the tiller: mally, stop the engine, disconnect the 25. Please remember: You can always stop a. Walk behind and to one side of the spark plug wire and prevent it from tou

Inhaltszusammenfassung zur Seite Nr. 5

Decals Reverse Clutch Control Forward Clutch Bail For your safety and the safety of others, vari- Operating Instruction (Models 644A) ous safety and operational decals are located on your unit (see Figure 1-2). Keep the decals clean and legible at all times. Starting Stabilization Contact your local service dealer or the factory Message (on engine) for replacements if any decals are damaged or missing. Warning Messages Refer to the Parts List pages in this Manual for decal locations, des

Inhaltszusammenfassung zur Seite Nr. 6

SECTION 2: ASSEMBLY WARNING: To prevent ASSEMBLY STEPS personal injury or property STEP 1: UNPACKING INSTRUCTIONS damage, do not start the engine NOTE: While unpacking, do not severely until all assembly steps are bend any control cables. complete and you have read and understand the safety and 1. The tiller weighs approximately 133 lbs. operating instructions in this Do not attempt to remove it from the ship- manual. ping platform until instructed to do so in 1 1 these Assembly steps

Inhaltszusammenfassung zur Seite Nr. 7

K M O N L Fig. 2-3: Wheel in FREEWHEEL position G I H A STEP 4: INSTALL FORWARD CLUTCH CABLE 1. Carefully unwrap the forward clutch ca- F ble (cable without an attached knob) from its shipping position and slide the thin ca- G ble wire (T, Fig. 2-4) into the slot in the ca- E ble bracket. Push the cable connector (U, Fig. 2-4) up through the hole in the bracket until the groove in the connector snaps C F into place. 2. Thread the #10-24 hex nut (Z, Fig. 2-5) halfway onto the screw (V) wh

Inhaltszusammenfassung zur Seite Nr. 8

BRONCO 4. Check for correct tension on the forward drive belt by taking two measurements of the cable spring, as follows: a. With the Forward Clutch Bail (Y, Fig. 2- 6) in an open (released) position, measure the length of the cable spring (W) from the Z outermost coil to the outermost coil. X b. Squeeze the Forward Clutch Bail against the handlebar (see Fig. 2-7) and re-mea- sure the spring length. The belt tension is correct if this second measurement is be- Hold bail against handlebar w

Inhaltszusammenfassung zur Seite Nr. 9

STEP 6: CHECK TRANSMISSION STEP 7: ADD MOTOR OIL STEP 8: CHECK HARDWARE OIL LEVEL The tiller is shipped without oil in the en- Check all nuts and screws for tightness. gine. The transmission was filled with gear oil at STEP 9: CHECK AIR PRESSURE IN the factory. However, you should check the IMPORTANT: Do not start the engine with- TIRES (units with pneumatic tires) gear oil level at this time to make certain it out first adding motor oil. Severe engine Check the air pressure with a tire

Inhaltszusammenfassung zur Seite Nr. 10

SECTION 3: FEATURES AND CONTROLS WARNING: Before operating your machine, carefully read and understand all safety, controls and operating instructions in this Manual, the separate Engine Forward Clutch Bail Reverse Clutch Control Owner’s Manual, and on the (Model 644A) decals on the machine. Failure to follow these instructions can result in Depth Regulator serious personal injury. INTRODUCTION Handlebar Height Adjustment This Section describes the location and function of the contro

Inhaltszusammenfassung zur Seite Nr. 11

begin tilling at a very shallow depth setting WARNING: Use extreme and gradually increase the tilling depth. caution when reversing or A pulling the machine towards WARNING: Do not attempt you. Look behind to avoid D to till too deeply too quickly. obstacles. B Gradually work down to deeper Never attempt to till in reverse. tilling depths. Failure to follow this warning Place the Depth Regulator could result in personal injury Lever in the “travel” position C or property damage. be

Inhaltszusammenfassung zur Seite Nr. 12

SECTION 4: OPERATION 1. Complete the Pre-Start Checklist on this WARNING: Before Reverse Clutch Control page. operating your machine, (Model 644A) carefully read and understand 2. Put the wheels in the WHEEL DRIVE po- all safety (Section 1), controls sition (see Wheel Drive Pins in Section 3 of (Section 3) and operating this manual). instructions (Section 4) in this WARNING: To help Forward Manual, the separate Engine Clutch Bail prevent serious personal injury Owner’s Manual, and on

Inhaltszusammenfassung zur Seite Nr. 13

3. Start engine and allow it to warm up. (b) Swing the handlebar to the left so the Then put throttle in “FAST” setting. right wheel takes a “step” backward. Next swing the handlebar to the right so the left 4. For forward motion of the wheels and wheel “steps” backward. Repeat as needed. power to the tines: (a) Pull Forward Clutch Bail (Fig. 4-1) up (c) If longer distances need to be covered against handlebar. Release bail to stop for- in reverse, shut off the engine, then place ward moti

Inhaltszusammenfassung zur Seite Nr. 14

TILLING TIPS & TECHNIQUES Tilling Depths  This is a CRT (counter-rotating tine) tiller. As the wheels pull forward, the tines rotate back- ward. This creates an “uppercut” tine action which digs deeply, uprooting soil and weeds. Don’t overload the engine, but dig as deeply as possible on each pass. On later passes, the WARNING: Before wheels may tend to spin in the soft dirt. Help them along by lifting up slightly on the handlebar tilling, contact your (one hand, palm up, works most easily).

Inhaltszusammenfassung zur Seite Nr. 15

TILLING TIPS & TECHNIQUES (CON’T) Tilling On Slopes Read the following recommendations before tilling on slopes: WARNING: Do not If you must garden on a moderate slope, please follow two very important guidelines: operate tiller on a slope too steep for safe operation. Till 1. Till only on moderate slopes, never on steep ground where footing is difficult (review safe- slowly and be sure you have ty rules in Section 1: Safety of this manual). good footing. Never permit 2. We recommend tilli

Inhaltszusammenfassung zur Seite Nr. 16

TILLING TIPS & TECHNIQUES (CON’T) Terrace Gardening (continued)  To create a terrace, start at the top of the slope and work down. Go back and forth across the first row as shown in Fig. 4-10.  Each succeeding lower terrace is started by walking below the terrace you’re preparing. For added stability of the tiller, always keep the uphill wheel in the soft, newly tilled soil. Do not till the last 12" or more of the downhill outside edge of each terrace. This untilled strip helps prevents the t

Inhaltszusammenfassung zur Seite Nr. 17

SECTION 5: MAINTENANCE If a cover is leaking, check for loose WARNING: Before TILLER LUBRICATION screws. If the screws are tight, a new inspecting, cleaning or servicing After every 10 operating hours, oil or gasket or oil seal may be required. the machine, shut off engine, grease the lubrication points shown in wait for all moving parts to come If the leak is from around a shaft and oil Figure 5-1 and described below. to a complete stop, disconnect seal, the oil seal probably needs

Inhaltszusammenfassung zur Seite Nr. 18

WARNING: Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage. 4. The gear oil level is correct if the gear oil B. To Drain the Transmission Gear Oil: BOLO TINES is approximately halfway up the side of the The transmission gear oil does not need to The bolo tines wi

Inhaltszusammenfassung zur Seite Nr. 19

WARNING: Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage. b. Unthread the hex nut (C, Figure 5-4) halfway up the adjustment screw (D). c. Unhook the top of the spring from the Forward Clutch Bail. d. Use pliers to prevent the adjuster (B) from turning and tur

Inhaltszusammenfassung zur Seite Nr. 20

WARNING: Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage. 5. Release the Reverse Clutch Control Replacement Belt Information FORWARD CLUTCH knob.and then unthread the inner jam nut If the drive belt needs to be replaced, see BAIL ADJUSTMENT (C, Figure 5-6) one


Ähnliche Anleitungen
# Bedienungsanleitung Kategorie Herunterladen
1 Troy-Bilt 12056(7HP) Handbuch Steuerknüppel 2
2 Troy-Bilt 12001 Handbuch Steuerknüppel 1
3 Troy-Bilt 12056-7HP Handbuch Steuerknüppel 0
4 Troy-Bilt 12060 Handbuch Steuerknüppel 2
5 Troy-Bilt 12065 Handbuch Steuerknüppel 0
6 Troy-Bilt 12068-7HP Handbuch Steuerknüppel 0
7 Troy-Bilt 12069 Handbuch Steuerknüppel 3
8 Troy-Bilt 12068 Handbuch Steuerknüppel 2
9 Troy-Bilt 12069-7HP Handbuch Steuerknüppel 0
10 Troy-Bilt 12070-8HP Handbuch Steuerknüppel 1
11 Troy-Bilt 12071-8HP Handbuch Steuerknüppel 0
12 Troy-Bilt 12071 Handbuch Steuerknüppel 0
13 Troy-Bilt 12087-7HP Handbuch Steuerknüppel 1
14 Troy-Bilt 12087, 12088, 12089, 12090 Handbuch Steuerknüppel 2
15 Troy-Bilt 12087C Handbuch Steuerknüppel 0
16 Agilent Technologies 5951-2827 Handbuch Steuerknüppel 1
17 Agilent Technologies 5951-2826 Handbuch Steuerknüppel 1
18 Agri-Fab 45-0308 Handbuch Steuerknüppel 0
19 Agri-Fab 45-03083 Handbuch Steuerknüppel 3
20 Agri-Fab 45-03085 Handbuch Steuerknüppel 1