Inhaltszusammenfassung zur Seite Nr. 1
Steam Pro Compact
Professional Ironing System
Instruction Booklet
SR8200
Please read these instructions carefully
and retain for future reference.
Inhaltszusammenfassung zur Seite Nr. 2
Contents Sunbeam’s Safety Precautions 1 Features of your Steam Pro Compact 2 Using your professional ironing system 4 Care and cleaning 6 Ironing guide 7 Ironing chart 8
Inhaltszusammenfassung zur Seite Nr. 3
Sunbeam’s Safety Precautions SAFETY PRECAUTIONS FOR YOUR • Iron only on an ironing board. PROFESSIONAL IRONING SYSTEM. • An iron takes approximately 30 minutes • Do not remove the boiler cap during use, as to cool down. the unit is under pressure and there is a • Do not wind the cord around the soleplate danger of scolding. Allow the unit to cool for 5 • Do not leave the iron unattended while it is minutes before opening. plugged into the power outlet. • Do not leave a hot iron within reach of
Inhaltszusammenfassung zur Seite Nr. 4
Features of your Steam Pro Compact Iron thermostat light The iron thermostat light illuminates to indicate that the iron soleplate is heating, and goes out when it has reached the temperature selected on the temperature dial. The thermostat light cycles on and off during ironing as the iron soleplate maintains the selected temperature. Boiler cap The easy-fill boiler holds 1 litre water. Iron rest Place the iron on the heat resistant iron rest during ironing. 2
Inhaltszusammenfassung zur Seite Nr. 5
professional ironing system Steam release button Press and hold the steam release button to produce a constant stream of high-powered steam to reduce your ironing time and effort. Steam will not be emitted from the iron when the steam release button is not depressed. Variable temperature dial The variable temperature dial adjusts the temperature of the iron soleplate, allowing you to select the desired temperature for each garment. Boiler thermostat light The boiler thermostat light illuminates
Inhaltszusammenfassung zur Seite Nr. 6
Using your professional ironing system Before first use Using your professional ironing system Remove any adhesive stickers, plastic covers 1.Insert the plug into a 230/240V power or cardboard sleeves from the soleplate. outlet and turn the power on. Remove any remaining adhesive by rubbing 2.Depress the iron and boiler on/off button to the soleplate with a cloth dampened with turn the appliance on. methylated spirits. Note: when turned on for the first time your new iron may give off vapours fo
Inhaltszusammenfassung zur Seite Nr. 7
Using your professional ironing system continued 5.Press and hold the steam release button to 3.Wait a few minutes for the boiler to cool, iron with steam. To dry iron, do not press then loosen the cap slowly to release any the steam release button. Both the steam remaining steam in the boiler. ready indicator and the boiler thermostat 4.Unscrew and remove the cap completely. light will cycle on and off during ironing as 5.Wait a few minutes before slowly refilling the ironing system maintains t
Inhaltszusammenfassung zur Seite Nr. 8
Care and cleaning To clean the exterior of your appliance, wipe To clean the stainless steel soleplate, use a over with a damp soft cloth and wipe dry. stainless steel or metal cleaner and rub gently with a damp cloth and wipe dry. Do NOT use harsh abrasives, chemical cleaners or solvents to clean the exterior of Do not use scouring pads, abrasives or harsh your appliance, as these will damage the cleaners to clean your stainless steel surface. soleplate as these will scratch and damage the surf
Inhaltszusammenfassung zur Seite Nr. 9
Ironing guide Selecting the ironing temperature. • When reducing the temperature to iron sensitive fabrics, allow approximately 2 Always read garment labels and follow the minutes for the iron to cool to the new manufacturer’s ironing instructions. Refer setting. to the Ironing Chart for temperature recommendations. • Pure woollen fabrics (100% wool) can be steam ironed with the temperature dial set Hints for easier ironing to Wool. Use an ironing cloth to prevent • Sort articles to be ironed ac
Inhaltszusammenfassung zur Seite Nr. 10
Ironing Chart Fabric Temperature Setting Ironing Recommendation Acrylic • Dry iron on wrong side. Acetate • Dry iron on wrong side while still damp or use spray to dampen. Silk •• Iron on wrong side. Use an ironing cloth to prevent shine marks. Nylon •• Iron on wrong side while still damp or use spray to dampen. Polyester •• Iron on wrong side while still damp or use spray to dampen. Rayon •• Iron on wrong side of fabric. Viscose •• Mainly dry iron. Steam can be used under manufacturer’s instru
Inhaltszusammenfassung zur Seite Nr. 11
‘Sunbeam’ and ‘Steam Pro’ are registered trademarks of Sunbeam Corporation. Designed in Italy. Made in China. Due to minor changes in design or otherwise, the product may differ from the one shown in this leaflet. Backed by Sunbeam‘s 2 Year Replacement Guarantee and National Service Network. © Copyright. SUNBEAM CORPORATION LIMITED 2003. (INCORPORATED IN N.S.W.) A.C.N. 000 006 771 Sunbeam Corporation is a division of GUD Holdings Ltd. For more information or advice on this or any other Sunbeam
Inhaltszusammenfassung zur Seite Nr. 12
Consumer Hotline Australia 1800 025 059 New Zealand (09) 912 0747 www.sunbeam.com.au is a registered Trademark of Sunbeam Corporation Limited. ACN 000 006 771. © Sunbeam Corporation Limited 2003.
