Inhaltszusammenfassung zur Seite Nr. 1
Impressa
Z5/Z6
Quick
Reference
Guide
This Guide does not replace the Operating Instructions.
For details and cautions you must read all instructions.
Watch the DVD instructions!
Traces of Coffee Grounds in New Machine?
This is normal! Grinder was tested during assembly with
beans. Despite cleaning, traces of ground coffee may
be found.
RED TEXT represents display text. Illustration numbers
on next page correspond with Operating Instructions.
A) First Time Ever Preparation
1. Fill water in tan
Inhaltszusammenfassung zur Seite Nr. 2
Rotary On/Off Dial Rinse COFFEE READY Milk Cappuccino Special Hot 1-Cup 2-Cup 1-Cup 2-Cup Latte Coffee Water Espresso Coffee Fig. 3 Fig. 4 Lid for Grind ground selector Cover coffee Bean lid container safety lid Fig. 5c Fig. 5d Venting tip Milk & Froth ACS Fig. 5e Fig. 5f (Cappuccino) Milk only (Latte) Gap Steam only (Rinsing) Milk Coffee Nozzle Nozzle
Inhaltszusammenfassung zur Seite Nr. 3
• Then attach the long Dual Nozzle System to the Dial component (Fig. 5d). Please note: The milk nozzle should sit tight. The coffee nozzle must have a gap (Fig. 5e). Make sure the dial points to the cup with saucer for cappuccino (Fig. 5f). • Attach the long hose to the dial component and insert the other end into a milk carton. Thermal Milk Container: If you use the thermal milk container, attach the straight rod to the lid with the tapered end pointing to the bottom. Then insert the elbo
Inhaltszusammenfassung zur Seite Nr. 4
E) Cappuccino and Latte COFFEE READY Place a cup under the ACS. The dial points to the cappuc- cino setting and the hose connects to the dial component and is inserted into cold milk. Push the Cappuccino Button. CAPPUCCINO then MILK 15 SEC then 3 OZ. NORMAL. For 15 seconds hot frothed milk is produced, coffee is ground, tamped and 3 oz. of high pressure coffee is added. After the used coffee is discarded the display returns to COFFEE READY. For Latte (steamed milk without froth) turn the dial
Inhaltszusammenfassung zur Seite Nr. 5
K) Adjusting the Grinder Important: You can only adjust the fineness during the actual grinding process. • For darker, oily beans, grind somewhat coarser. For lighter beans, grind somewhat finer. • Open the Cover Lid and turn the Grind Selector while grinding (Fig. 4). Coarser: turn the dial towards the bean symbol; Finer: turn away from the bean symbol. L) Using Pre-Ground Coffee COFFEE READY. Open the Cover Lid. Open the Lid for ground coffee (Fig. 4). PRE-GROUND FILL POWDER. Add one or
Inhaltszusammenfassung zur Seite Nr. 6
Example: Push and hold the 1-cup Coffee Button until ENOUGH? PRESS BUTTON When the desired amount of coffee is in your cup, push the 1-cup Coffee Button again. CONFIRMED4 Example: Push and hold the Cappuccino Button until ENOUGH MILK PRESS BUTTON. When enough frothed milk is in your cup, press the Cappuccino Button. Then the Z5/Z6 starts brewing coffee. ENOUGH? PRESS BUTTON. When enough coffee is added press the Cappuccino button again. CONFIRMED 4. Please note: To re-program temperature and
Inhaltszusammenfassung zur Seite Nr. 7
shows FILTER RINS. Do not interrupt. After 90 seconds the display shows UNIT IS HEATING then COFFEE READY. Q) Messages Immediate Action Messages FILL WATER TANK: add water to the water tank. FILL BEANS: add beans to the bean container. RINSE: push the Rinse Button. Hot water will come out of the Coffee Spouts and / or the ACS. EMPTY GROUNDS or EMPTY TRAY: remove the drawer, empty the used coffee container (ground coffee) and the drawer (water). Replace all parts. IMPORTANT: If you pull out t
Inhaltszusammenfassung zur Seite Nr. 8
Place a 12 oz. container under the coffee spouts and an 8 oz. container under the nozzles of the auto-cappuccino system and push the Rinse Button. MACHINE IS CLEANING. When the message ADD TABLET appears, open the Cover Lid, then the Ground Coffee Lid (Fig. 4) and drop one cleaning tablet into the funnel. Close the Ground Coffee Lid. PRESS BUTTON. Push the Rinse Button. MACHINE IS CLEANING. After a few minutes: TRAY GROUNDS EMPTY. Remove drawer. Empty used coffee container and drawer and replace
Inhaltszusammenfassung zur Seite Nr. 9
T) Programming The Z5/Z6 provides programming, maintenance and look-up functions. For details see chapter 26 in the Operating Instructions. COFFEE READY Push and hold the Rotary Dial until the Display shows FILTER. Turning the dial clockwise lets you access the func- tions listed below. To get back to COFFEE READY turn until the display shows EXIT and push the Rotary Dial. If you want to get into a function, push the Rotary Dial again, and sub- functions will appear. Turning the Dial will show y
Inhaltszusammenfassung zur Seite Nr. 10
Function • Sub-functions Comment UNIT ON Set an auto-on time OFF AFTER Change from 2 hours auto-off to many other options INFORMATION Shows how many cups were brewed with each button. Also, shows pre-sets for all buttons and how often maintenance programs were performed. RENAME Rename all eight beverage buttons, the welcome and end message. You can reset back to the factory setting. LANGUAGE Select from English, Spanish, German, French, Dutch DISPLAY Select the time format AM
