Inhaltszusammenfassung zur Seite Nr. 1
OPERATOR’S MANUAL
HEAT GUN
DOUBLE INSULATED
HG500
Your heat gun has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using
this product.
Thank you for buying a Ryobi product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Inhaltszusammenfassung zur Seite Nr. 2
TABLE OF CONTENTS n Introduction ..................................................................................................................................................................... 2 �n Important Safety Instructions ....................................................................................................................................... 3-4 �n Specific Safety Rules......................................................................................................
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT SAFETY INSTRUCTIONS n Avoid accidental starting. Be sure switch is off WARNING: before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on Read and understand all instructions. Failure to follow invites accidents. all instructions listed below may result in electric shock, n Remove adjusting keys or wrenches before turning fire and/or serious personal injury. the tool on. A wrench or a key that is left attached to a rotating pa
Inhaltszusammenfassung zur Seite Nr. 4
IMPORTANT SAFETY INSTRUCTIONS n When servicing a tool, use only identical replacement SERVICE parts. Follow instructions in the Maintenance section n Tool service must be performed only by qualified of this manual. Use of unauthorized parts or failure to repair personnel. Service or maintenance performed by follow Maintenance Instructions may create a risk of unqualified personnel may result in a risk of injury. shock or injury. SPECIFIC SAFETY RULES n The nozzle of the heat gun becomes very
Inhaltszusammenfassung zur Seite Nr. 5
SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes Time Alternating Current Type of current Direct Current Type or a characteristic of current n No Load Speed Rotational speed, at no load o Class II Construction Doub
Inhaltszusammenfassung zur Seite Nr. 6
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
Inhaltszusammenfassung zur Seite Nr. 7
ELECTRICAL DOUBLE INSULATION EXTENSION CORDS Double insulation is a concept in safety in electric power When using a power tool at a considerable distance from tools, which eliminates the need for the usual three- a power source, be sure to use an extension cord that has wire grounded power cord. All exposed metal parts are the capacity to handle the current the tool will draw. An un- isolated from the internal metal motor components with dersized cord will cause a drop in line voltage, result
Inhaltszusammenfassung zur Seite Nr. 8
FEATURES PRODUCT SPECIFICATIONS Heat Output........................................................................................................................................................ 200˚F-1100˚F Input ..................................................................................................................................... 120 V, 60 Hz, AC only, 11 Amps Net Weight..............................................................................................................
Inhaltszusammenfassung zur Seite Nr. 9
FEATURES KNOW YOUR HEAT GUN TEMPERATURE ADJUST DIAL See Figure 1. The temperature of your heat gun can be adjusted from 200ºF to 1100ºF by rotating the temperature adjustment dial. Before attempting to use this product, familiarize yourself with all operating features and safety rules. LED TEMPERATURE DISPLAY ON/OFF SWITCH LED lights located on top of the heat gun display the desired temperature as indicated by the position of the temperature Your heat gun has a conveniently located on/off s
Inhaltszusammenfassung zur Seite Nr. 10
OPERATION Persons removing paint should follow these guidelines: WARNING: n Move the workpiece outdoors. If this is not possible, keep the work area well ventilated. Open the windows and put Do not allow familiarity with tools to make you careless. an exhaust fan in one of them. Be sure the fan is moving Remember that a careless fraction of a second is suf- the air from inside to outside. ficient to inflict serious injury. n Remove or cover any carpets, rugs, furniture, clothing, cooking u
Inhaltszusammenfassung zur Seite Nr. 11
OPERATION WARNING: This heat gun generates extremely high temperatures. Hidden areas such as behind walls, ceilings, floors, soffit boards, and other panels may contain flammable materi- SWITCH IN als that could be ignited by the heat gun when working ON POSITION in these locations. Keep tool in constant motion; do not stop or dwell in one spot as the panel or material behind it may ignite. The ignition of these materials may not be readily apparent and could result in property damage and
Inhaltszusammenfassung zur Seite Nr. 12
OPERATION INSTALLING ATTACHMENTS HEAT GUN NOZZLE See Figures 5 - 6. Several attachments are included with the heat gun to expand its capabilities. Attachments are installed simply by placing them on the end of the heat gun’s nozzle. NOTE: Install or remove attachments only when both the heat gun nozzle and the attachment nozzle are cool. Scraper nozzle: The scraper nozzle reduces the airflow from a circular area to a wide, narrow line. This nozzle can be used along with the handheld scraper
Inhaltszusammenfassung zur Seite Nr. 13
MAINTENANCE WARNING: WARNING: When servicing, use only identical Ryobi replacement Always unplug the heat gun before performing any type parts. Use of any other parts may create a hazard or of maintenance. Following this rule will reduce the risk cause product damage. of serious personal injury. CLEANING THE HEAT GUN WARNING: The heat gun and attachments should be kept clean, dry, Always wear safety goggles or safety glasses with side and free of oil or grease. Only a mild soap and damp cl
Inhaltszusammenfassung zur Seite Nr. 14
OPERATOR’S MANUAL HEAT GUN DOUBLE INSULATED HG500 • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. Please call 1-800-525-2579 for your nearest Ryobi Authorized Service Center. You can also check our web site at www.ryobitools.com for a complete list of Authorized Service Centers. • MODEL NO. AND SERIAL NO. The model
