Inhaltszusammenfassung zur Seite Nr. 1
OPERATOR’S MANUAL
RECIPROCATING SAW
VARIABLE SPEED
DOUBLE INSULATED
RJ162V
Your reciprocating saw has been engineered and manufactured to Ryobi’s high standard for dependability, ease of opera-
tion, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using
this product.
Thank you for buying a Ryobi product.
SAVE THIS MANUAL FOR FUTURE REF
Inhaltszusammenfassung zur Seite Nr. 2
TABLE OF CONTENTS n Introduction ..................................................................................................................................................................... 2 �n General Safety Rules.................................................................................................................................................... 3-4 �n Specific Safety Rules...................................................................................................
Inhaltszusammenfassung zur Seite Nr. 3
GENERAL SAFETY RULES n Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on WARNING: the switch or plugging in tools that have the switch on Read and understand all instructions. Failure to follow invites accidents. all instructions listed below, may result in electric shock, n Remove adjusting keys or wrenches before turning fire and/or serious personal injury. the tool on. A wrench or a key that is left attached to a rotating part of the
Inhaltszusammenfassung zur Seite Nr. 4
GENERAL SAFETY RULES n When servicing a tool, use only identical replacement SERVICE parts. Follow instructions in the Maintenance section n Tool service must be performed only by qualified of this manual. Use of unauthorized parts or failure to repair personnel. Service or maintenance performed by follow Maintenance Instructions may create a risk of unqualified personnel may result in a risk of injury. shock or injury. SPECIFIC SAFETY RULES n Hold tool by insulated gripping surfaces when n
Inhaltszusammenfassung zur Seite Nr. 5
SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes Time Alternating Current Type of current Direct Current Type or a characteristic of current n No Load Speed Rotational speed, at no load o Class II Construction Doub
Inhaltszusammenfassung zur Seite Nr. 6
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
Inhaltszusammenfassung zur Seite Nr. 7
ELECTRICAL DOUBLE INSULATION EXTENSION CORDS Double insulation is a concept in safety in electric power When using a power tool at a considerable distance from tools, which eliminates the need for the usual three- a power source, be sure to use an extension cord that has wire grounded power cord. All exposed metal parts are the capacity to handle the current the tool will draw. An isolated from the internal metal motor components with undersized cord will cause a drop in line voltage, resulti
Inhaltszusammenfassung zur Seite Nr. 8
FEATURES PRODUCT SPECIFICATIONS Length of Stroke..................................................1-3/16 in. Input ...............................120 V, 60 Hz, AC only, 6.5 Amps Strokes per Minute........................................0-2,800 MAX Net Weight.............................................................. 6.3 lbs. VARIABLE SPEED DIAL BLADE BASE ASSEMBLY SWITCH TRIGGER Fig. 1 KNOW YOUR RECIPROCATING SAW TOOLLESS BLADE CHANGE SYSTEM See Figure 1. The toolless blade change system e
Inhaltszusammenfassung zur Seite Nr. 9
ASSEMBLY UNPACKING WARNING: This product has been shipped completely assembled. n Carefully remove the tool and any accessories from the If any parts are missing do not operate this tool until the box. Make sure that all items listed in the packing list are missing parts are replaced. Failure to do so could result included. in possible serious personal injury. n Inspect the tool carefully to make sure no breakage or damage occurred during shipping. WARNING: n Do not discard the packing mate
Inhaltszusammenfassung zur Seite Nr. 10
OPERATION WARNING: The tool should never be connected to a power supply when you are assembling parts, making adjustments, cleaning, performing maintenance, or when the tool is not in use. Disconnecting the tool will prevent accidental starting that could cause serious injury. TURNING THE SAW ON/OFF See Figure 2. n To turn the saw on: Depress the switch trigger. n To turn the saw off: Release the switch trigger. ADJUSTING THE SPEED Fig. 2 See Figure 3. The variable speed feature allows the s
Inhaltszusammenfassung zur Seite Nr. 11
OPERATION OPERATING THE SAW See Figure 5. n Secure the workpiece to a work bench or table with a vise or with clamps. n Make sure the saw blade is clear of any foreign material and that the power cord and extension cord are out of the blade path. n Hold the saw firmly in front of and clearly away from you. n Mark the line of cut clearly. n Depress the switch trigger to start the cutting action. n Set the base assembly against the workpiece. n Move the blade into the workpiece. NOTE: Do
Inhaltszusammenfassung zur Seite Nr. 12
OPERATION METAL CUTTING See Figure 7. You may cut metals such as sheet steel, pipe, steel rods, aluminum, brass, and copper with the saw. Observe the following tips when metal cutting: n Be careful not to twist or bend the saw blade. n Do not force the tool and use a slow speed setting. n Use cutting oil when cutting soft metals and steel. Cutting oil also keeps the blades cool, increases cutting action, and prolongs blade life. n Never use gasoline since normal sparking of motor could ignit
Inhaltszusammenfassung zur Seite Nr. 13
NOTES 13
Inhaltszusammenfassung zur Seite Nr. 14
OPERATOR’S MANUAL RECIPROCATING SAW VARIABLE SPEED DOUBLE INSULATED RJ162V • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. Please call 1-800-525-2579 for your nearest Ryobi Authorized Service Center. You can also check our web site at www.ryobitools.com for a complete list of Authorized Service Centers. • MODEL NO.
