Inhaltszusammenfassung zur Seite Nr. 1
2 4 v X L i
?
OPERATOR’S MANUAL
24 VOLT LITHIUM-ION
RECIPROCATING SAW
VARIABLE SPEED
R854
NEW BATTERY PACKS MUST BE
CHARGED BEFORE FIRST USE
Your reciprocating saw has been engineered and manufactured to our high standards for dependability, ease of operation,
and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
Thank
Inhaltszusammenfassung zur Seite Nr. 2
TABLE OF CONTENTS Introduction .....................................................................................................................................................................2 General Safety Rules ................................................................................................................................................... 3-4 Specific Safety Rules .....................................................................................................
Inhaltszusammenfassung zur Seite Nr. 3
GENERAL SAFETY RULES Use safety equipment. Always wear eye protection. WARNING! Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate Read all instructions. Failure to follow all conditions will reduce personal injuries. instructions listed below may result in electric shock, fire and/or serious injury. The term “power Avoid accidental starting. Ensure the switch is in the tool” in all of the warnings listed below refers off-p
Inhaltszusammenfassung zur Seite Nr. 4
GENERAL SAFETY RULES Use the power tool, accessories and tool bits etc., in connection from one terminal to another. Shorting the accordance with these instructions and in the manner battery terminals together may cause burns or a fire. intended for the particular type of power tool, taking Under abusive conditions, liquid may be ejected from into account the working conditions and the work the battery, avoid contact. If contact accidentally to be performed. Use of the power tool for o
Inhaltszusammenfassung zur Seite Nr. 5
SAFETY RULES FOR CHARGER An extension cord should not be used unless WARNING! absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If READ AND UNDERSTAND ALL INSTRUCTIONS. extension cord must be used, make sure: Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal a. That pins on plug of extension cord are the injury. same number, size and shape as those of plug on cha
Inhaltszusammenfassung zur Seite Nr. 6
SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes Time Alternating Current Type of current Direct Current Type or a characteristic of current n o No Load Speed Rotational speed, at no load Class II Construction Doubl
Inhaltszusammenfassung zur Seite Nr. 7
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING Indicates an imminently hazardous situation, which, if not avoided, will result DANGER: in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, could result WARNING: in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, may result in CAUTION minor or moderate injury. (Wi
Inhaltszusammenfassung zur Seite Nr. 8
2 4 v X L i ? FEATURES PRODUCT SPECIFICATIONS Strokes Per Minute .............................0-2,500 r/min. (RPM) Length of Stroke ...................................................1-3/16 in. Charger Input ................................... 120 V, 60 Hz, AC only Motor ..................................................................24 Volt DC Charge Rate ..............................................................1 hour Switch ..........................................................Varia
Inhaltszusammenfassung zur Seite Nr. 9
FEATURES KNOW YOUR RECIPROCATING SAW BASE (SHOE) ASSEMBLY See Figure 1. The shoe assembly can be adjusted forward or backward The safe use of this product requires an understanding of to take advantage of the unused portion of the blade, or for the information on the tool and in this operator’s manual as special jobs requiring low blade clearance. well as a knowledge of the project you are attempting. Before BLADE CLAMP LOCK / RELEASE LEVER use of this product, familiarize yourself with all
Inhaltszusammenfassung zur Seite Nr. 10
ASSEMBLY UNPACKING WARNING: This product has been shipped completely assembled. If any parts are damaged or missing, do not Carefully remove the tool and any accessories from the operate this tool until the parts are replaced. box. Make sure that all items listed in the packing list are Failure to heed this warning could result in serious included. personal injury. Inspect the tool carefully to make sure no breakage or damage occurred during shipping. Do not discard the packing ma
Inhaltszusammenfassung zur Seite Nr. 11
OPERATION CHARGE LEVEL INDICATOR CAUTION: If at any point during the charging process none 24v XLi of the LEDs are lit, remove the battery pack from the charger to avoid damaging the product. DO NOT insert another battery. Return the charger and ? battery to your nearest service center for service or replacement. CAUTION: Charge in a well ventilated area. Do not block charger vents. Keep them clear to allow proper ventilation. CHARGING THE BATTERY PACK NOTE: New 24 Volt lithium-ion batte
Inhaltszusammenfassung zur Seite Nr. 12
OPERATION LED FUNCTION OF CHARGER See Figure 3. LED BATTERY RED GREEN ACTION INDICATOR PACK LED LED Charging Fast charging ON OFF Charges in 1 hour Charger pre-charges battery until normal voltage is reached, then Charging Deeply Discharged ON OFF begins fast charge mode. May take longer than 1 hour to fully charge Maintenance Fast charging is complete Full OFF ON charging Charger maintains charge mode When battery pack reaches cooled Flashing Evaluate Hot battery pack OFF temperature,
Inhaltszusammenfassung zur Seite Nr. 13
24 v X L i ? 24 v X L i ? OPERATION TO INSTALL BATTERY PACK See Figure 5. Place the battery pack in the saw aligning raised rib on battery pack with groove in the saw’s battery port. Make sure the latches on each side of the battery pack snap into place and the battery pack is secured to saw TO before beginning operation. REMOVE CAUTION: TO When placing battery pack in the tool, be sure INSTALL raised rib on battery pack aligns with the grooves in the bottom of the saw and latches int
Inhaltszusammenfassung zur Seite Nr. 14
® OPERATION BLADE CLAMP TO INSTALL SAW BLADE BLADE CLAMP See Figure 8. LOCK / RELEASE LEVER Remove the battery pack from the saw. Lift the toolless blade clamp lever located on the side of the saw. Insert saw blade fully between the toolless blade clamp BLADE and saw bar. Release the toolless blade clamp. GENERAL CUTTING See Figure 9. Rest the front of the saw shoe on the workpiece and align UNLOCK cutting edge of the blade with the line on the workpiece. LOCK Fig. 8 Start the saw
Inhaltszusammenfassung zur Seite Nr. 15
® OPERATION METAL CUTTING See Figure 11. Many kinds of metals can be cut with the saw. Be careful not to twist or bend the blades. Do not force. If the blade chatters or vibrates excessively, use a finer-tooth metal- cutting blade. If blade heats excessively, use lower speed. If blade teeth become filled or clogged when cutting soft met- als, such as aluminum, use a coarser-tooth blade or lower speed. We recommend use of oil when cutting metals to keep blades cool, increase cutting action,
Inhaltszusammenfassung zur Seite Nr. 16
MAINTENANCE GENERAL MAINTENANCE WARNING: Avoid using solvents when cleaning plastic parts. Most When servicing use only identical RIDGID plastics are susceptible to damage from various types of replacement parts. Use of any other parts may commercial solvents and may be damaged by their use. Use create a hazard or cause product damage. clean cloths to remove dirt, dust, oil, grease, etc. WARNING: WARNING: Do not at any time let brake fluids, gasoline, Always wear safety goggles or safety
Inhaltszusammenfassung zur Seite Nr. 17
WARRANTY ® RIDGID HAND HELD AND STATIONARY POWER TOOL 3 YEAR LIMITED SERVICE WARRANTY Proof of purchase must be presented when requesting war- WHAT IS NOT COVERED ranty service. This warranty applies only to the original purchaser at retail ® and may not be transferred. This warranty only covers de- Limited to RIDGID hand held and stationary power tools fects arising under normal usage and does not cover any purchased 2/1/04 and after. This product is manufactured malfunction, failure or d
Inhaltszusammenfassung zur Seite Nr. 18
OPERATOR’S MANUAL 24 VOLT LITHIUM-ION RECIPROCATING SAW VARIABLE SPEED R854 Customer Service Information: For parts or service, contact your nearest RIDGID authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www.ridgid.com. The model number of this tool is found on a plate attached to the motor housing. Please record the serial number
