Inhaltszusammenfassung zur Seite Nr. 1
OM-222 164 850AE
2007 −07
Processes
TIG (GTAW) Welding
Stick (SMAW) Welding
Flux Cored (FCAW) Welding
Air Carbon Arc (CAC-A)
Cutting and Gouging
Description
Arc Welding Power Source
Gold Star Series
302, 452, 652 (60 Hz), 402, 602, 852 (50 Hz)
File: Stick (SMAW)
Visit our website at
www.MillerWelds.com
Inhaltszusammenfassung zur Seite Nr. 2
From Miller to You Thank you and congratulations on choosing Miller. Now you can get the job done and get it done right. We know you don’t have time to do it any other way. That’s why when Niels Miller first started building arc welders in 1929, he made sure his products offered long-lasting value and superior quality. Like you, his customers couldn’t afford anything less. Miller products had to be more than the best they could be. They had to be the best you could buy. Today, the people that bu
Inhaltszusammenfassung zur Seite Nr. 3
TABLE OF CONTENTS SECTION 1 − SAFETY PRECAUTIONS - READ BEFORE USING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1-1. Symbol Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1-2. Arc Welding Hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1-3. Additional Symbols For Insta
Inhaltszusammenfassung zur Seite Nr. 4
Declaration of Conformity for European Community (CE) Products This information is provided for units with CE certification (see rating label on unit). NOTE Manufacturer: European Contact: Miller Electric Mg. Co. Mr. Danilo Fedolfi, 1635 W. Spencer St. Managing Director Appleton, WI 54914 USA ITW Welding Products Italy S.r.l. Phone: (920) 734-9821 Via Privata Iseo 6/E 20098 San Giuliano Milanese, Italy Phone: 39(02)98290-1 Fax: 39(02)98290203 European Contact Signature: Declares that the produ
Inhaltszusammenfassung zur Seite Nr. 5
SECTION 1 − SAFETY PRECAUTIONS - READ BEFORE USING som _2007 −04 7 Protect yourself and others from injury — read and follow these precautions. 1-1. Symbol Usage DANGER! − Indicates a hazardous situation which, if Indicates special instructions. not avoided, will result in death or serious injury. The possible hazards are shown in the adjoining symbols or explained in the text. Indicates a hazardous situation which, if not avoided, could result in death or serious injury. The possible This gro
Inhaltszusammenfassung zur Seite Nr. 6
Do not use welder to thaw frozen pipes. FUMES AND GASES can be hazardous. Remove stick electrode from holder or cut off welding wire at contact tip when not in use. Welding produces fumes and gases. Breathing Wear oil-free protective garments such as leather gloves, heavy these fumes and gases can be hazardous to your shirt, cuffless trousers, high shoes, and a cap. health. Remove any combustibles, such as a butane lighter or matches, Keep your head out of the fumes. Do not breathe the
Inhaltszusammenfassung zur Seite Nr. 7
1-3. Additional Symbols For Installation, Operation, And Maintenance FIRE OR EXPLOSION hazard. MOVING PARTS can cause injury. Do not install or place unit on, over, or near Keep away from moving parts such as fans. combustible surfaces. Keep all doors, panels, covers, and guards Do not install unit near flammables. closed and securely in place. Do not overload building wiring − be sure power supply system is Have only qualified persons remove doors, panels, covers, or properly sized,
Inhaltszusammenfassung zur Seite Nr. 8
1-4. California Proposition 65 Warnings For Gasoline Engines: Welding or cutting equipment produces fumes or gases which contain chemicals known to the State of California to Engine exhaust contains chemicals known to the State of cause birth defects and, in some cases, cancer. (California California to cause cancer, birth defects, or other reproduc- Health & Safety Code Section 25249.5 et seq.) tive harm. For Diesel Engines: Battery posts, terminals and related accessories contain lead and lead
Inhaltszusammenfassung zur Seite Nr. 9
SECTION 2 − CONSIGNES DE SÉCURITÉ − LIRE AVANT UTILISATION fre_som_2007 −04 7 Se protéger et protéger les autres contre le risque de blessure — lire et respecter ces consignes. 2-1. Symboles utilisés DANGER! − Indique une situation dangereuse qui si on Indique des instructions spécifiques. l’évite pas peut donner la mort ou des blessures graves. Les dangers possibles sont montrés par les symboles joints ou sont expliqués dans le texte. Indique une situation dangereuse qui si on l’évite pas peu
Inhaltszusammenfassung zur Seite Nr. 10
Il reste une TENSION DC NON NÉGLIGEABLE dans LE SOUDAGE peut provoquer un in les sources de soudage onduleur quand on a cendie ou une explosion. coupé l’alimentation. Le soudage effectué sur des conteneurs fermés tel Arrêter les convertisseurs, débrancher le courant électrique et que des réservoirs, tambours ou des conduites peu décharger les condensateurs d’alimentation selon les instructions provoquer leur éclatement. Des étincelles peuven indiquées dans la partie Entretien avant de toucher
Inhaltszusammenfassung zur Seite Nr. 11
Protéger les bouteilles de gaz comprimé d’une chaleur excessive, LES ACCUMULATIONS DE GAZ des chocs mécaniques, des dommages physiques, du laitier, des risquent de provoquer des blessures flammes ouvertes, des étincelles et des arcs. ou même la mort. Placer les bouteilles debout en les fixant dans un support station- Fermer l’alimentation du gaz protecteur en cas naire ou dans un porte-bouteilles pour les empêcher de tomber ou de non-utilisation. de se renverser. Veiller toujours à bien
Inhaltszusammenfassung zur Seite Nr. 12
LES FILS DE SOUDAGE peuvent LE RAYONNEMENT HAUTE FRÉ- provoquer des blessures. QUENCE (H.F.) risque de provoquer des interférences. Ne pas appuyer sur la gâchette avant d’en avoir reçu l’instruction. Le rayonnement haute fréquence (H.F.) peut Ne pas diriger le pistolet vers soi, d’autres per- provoquer des interférences avec les équipe- sonnes ou toute pièce mécanique en enga- ments de radio −navigation et de communica- geant le fil de soudage. tion, les services de sécurité et les ordinat
Inhaltszusammenfassung zur Seite Nr. 13
2-5. Principales normes de sécurité Safety in Welding, Cutting, and Allied Processes, ANSI Standard Z49.1, L4W 5NS (téléphone : 800-463-6727 ou à Toronto 416-747-4044, site de Global Engineering Documents (téléphone : 1-877-413-5184, site Internet : www.csa-international.org). Internet : www.global.ihs.com). Safe Practice For Occupational And Educational Eye And Face Protec- tion, ANSI Standard Z87.1, de American National Standards Institute, Recommended Safe Practices for the Preparation for We
Inhaltszusammenfassung zur Seite Nr. 14
OM-222 Page 6
Inhaltszusammenfassung zur Seite Nr. 15
A complete Parts List is available at www.MillerWelds.com SECTION 3 − DEFINITIONS 3-1. General Precautionary Label Warning! Watch Out! There are possible hazards as shown by the symbols. 1 Electric shock from welding electrode or wiring can kill. 1.1 Wear dry insulating gloves. Do not touch electrode with bare hand. Do not wear wet or damaged gloves. 1.2 Protect yourself from electric shock by insulating yourself from work and ground. 1.3 Disconnect input plug or power before working on machin
Inhaltszusammenfassung zur Seite Nr. 16
A complete Parts List is available at www.MillerWelds.com 3-2. Input Connection Label 12 3 4 1 Warning! Watch Out! There are possible hazards as shown by the symbols. 2 Electric shock from wiring can kill. 3 Disconnect input plug or power before working on machine. 4 Read the Owner’s Manual before working on this machine. 5 Consult rating label for input ? power requirements, and 1 2 V 3 check power available at the job site − they must match. 6 Read Owner’s Manual and inside labels for connec
Inhaltszusammenfassung zur Seite Nr. 17
A complete Parts List is available at www.MillerWelds.com 3-5. Manufacturer’s Rating Labels For CE Products Match label to one on unit. See Section 4-4. OM-222 Page 9
Inhaltszusammenfassung zur Seite Nr. 18
A complete Parts List is available at www.MillerWelds.com 3-6. Symbols And Definitions Some symbols are found only on CE products. Note Amperage Control/ Gas Tungsten Arc Shielded Metal Arc Amperes Panel Welding (GTAW) Welding (SMAW) A Do Not Switch Temperature Arc Force (DIG) Percent While Welding Output Circuit Breaker Remote Volts V Protective Earth Positive Negative Input (Ground) On Off Hertz Direct Current Hz Rated No Load Conventional Load Primary Voltage Line Connection U Voltage (Aver
Inhaltszusammenfassung zur Seite Nr. 19
A complete Parts List is available at www.MillerWelds.com SECTION 4 − INSTALLATION 4-1. Specifications Maximum Amperes Input at Rated Load Output, 50 or 60 Hz, Rated Amp IP Open- Three-Phase Model Model W Welding elding Range Range DC DC Circuit Circuit Rating Rating Output Voltage DC 200 V 230 V 380 V 400 V 440 V 460 V 575 V KVA KW 300 A @ 300 32 Volts 68 70 61 35 33 31 31 25 24.5 13.8 15 − 395 21M Amp (70) 4.0* 3.6* 1.1* 1.1* 1.0* 3.1* 1.5* 1.3* 0.67* DC, 60% Duty Cycle 450 A @ 450 38 Volts
Inhaltszusammenfassung zur Seite Nr. 20
A complete Parts List is available at www.MillerWelds.com 4-3. Volt-Ampere Curves Volt-ampere curves show mini- mum and maximum voltage and amperage output capabilities of unit. Curves of other settings fall be- tween curves shown. A. 300 Amp Model B. 450 Amp Model C. 650 Amp Model va_curve1 − 4/95 − SA-171 221 / SA-171 222 / SA-171 223 OM-222 Page 12
