Inhaltszusammenfassung zur Seite Nr. 1
KA1000
Dual Alarm Clock with
Wireless Alarm Monitoring Receiver
INSTRUCTION MANUAL
1st Edition
Inhaltszusammenfassung zur Seite Nr. 2
CONTENTS Important Safety Instructions .........................................................................................3 CONSUMER INFORMATION ..................................................................................4 INTRODUCTION .......................................................................................................6 KA1000 ALARM CLOCK ..........................................................................................7 INSTALLATION .......
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT SAFETY INSTRUCTION When using your KA1000, you should always follow these basic safety precautions to reduce the risk of fire, electric shock, and injury to person, including the following: 1. Read and understand all instructions before installing the KA1000. 2. Unplug the unit from the adaptor and the telephone cord before installing a back-up battery. Do not dispose the batteries in a fire; follow your local code for properly disposing batteries. 3. Do not open the cabinet of the u
Inhaltszusammenfassung zur Seite Nr. 4
Notice: the Canadian Department of communications label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective operational and safety requirements. The Department does not guarantee that the equipment will operate to the user’s satisfaction. Before installing this equip- ment, the users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. In some cases, the company’
Inhaltszusammenfassung zur Seite Nr. 5
Inhaltszusammenfassung zur Seite Nr. 6
INTRODUCTION Thank you for your purchase of dual alarm clock KA1000- the best design in alarm and monitoring systems but easy and simple to set up and use. The alarm clock will trigger either the bed shaker, table lamp, or sound to absolutely wake you up every morning. You could select a combination of sound and light or shaker and light to fit your lifestyle. It is created with other features as well to help protect life and organize your house better. The telephone ringer, door knock, door
Inhaltszusammenfassung zur Seite Nr. 7
A L A R M S C T S E N S O R B A T T E R Y A M A L A 1 A L A 2 P M S C T H ou r M i n . A L A 1 A L A 2 KA1000 DUAL ALARM CLOCK Night lamp 1 T i m e S n o oz e Snooze button Time button S C T Security timer button Hour Alarm 1 button Minutes Alarm 2 button AM/PM Alarm 1/2/Security Alarm Notification Bed Shaker Battery Low Notification Sensor Notification Security Notification Door clip or door hanger 3 2 Doorbell button Lamp ON/OFF Switch (test button) ON/OFF Switch Volume Control ON LED Code Dip Swi
Inhaltszusammenfassung zur Seite Nr. 8
Inhaltszusammenfassung zur Seite Nr. 9
REGISTER TRANSMITTERS TO THE CLOCK After installation, the KA1000 is ready to register its door knock, doorbell, telephone ring- er, and other accessories in the system. The door knock, telephone ringer and baby room call will be installed in channel 2 (C2). Other monitoring transmitter will be installed in channel 1 (C1). The dip switch code of each transmitter will be stored in KA1000 channel memory indicated by: CX:OX -> MEMORY LOCATION Registering the door knock with the KA1000: 1. Inse
Inhaltszusammenfassung zur Seite Nr. 10
Inhaltszusammenfassung zur Seite Nr. 11
Mode selector: You can choose shaker or sound and combine it with light when the alarm is triggered. Choose shaker and light for a silent alarm. It will wake just you, and not the other. You may turn on all three sound, light and shaker for a certainly wake up. Reading lamp or night light: Built-in night light or reading lamp (if table lamp is installed) will be turned On/Off from the light switch. Using LED indicators Mode LEDs: The corresponding LED will be illuminated for set up mode
Inhaltszusammenfassung zur Seite Nr. 12
ACCESSORIES The dual alarm clock system is designed to work in correspondence with other wireless receivers and work with all KA300 transmitters (sold separately). Select from the following to complete your system. A. Extended receiver: (KA1000EX) Turn on the lamp and plug into the extended receiver. Plug the extended receiver into an AC outlet and the light will flash to notify you everywhere it is placed: kitchen, living room, bathroom etc. Use light switch to turn on/off light for reading
Inhaltszusammenfassung zur Seite Nr. 13
Note: * Turn on the table lamp from the light switch on the extended receiver. Leave the switch on the lamp in the ON position or it will not flash the light. * The alarm function of the alarm clock KA1000 will not trigger the extended receiver. * The extended receiver is on stand-alone unit and receives signals directly from a transmitter. It does not need a KA1000 clock to operate. * If you use any transmitter with fire alarm, smoke alarm or weather alert radio, you must test tho
Inhaltszusammenfassung zur Seite Nr. 14
Note: * Do not block the smoke chamber on smoke detector. Install the transmitter on the siren side. * Test the system by pressing the test button on the fire alarm to make sure that the fire alarm and the transmitter work. Do not press test button on the transmitter to test the system. G. Weather Alert Transmitter (KWA300TX): Choose the event you want to alert on the weather radio (WR300). For example, setup the radio to turn on the siren when a tornado is coming or when your loca
Inhaltszusammenfassung zur Seite Nr. 15
TEST AND TROUBLESHOOTING Testing: Testing the KA1000 every night before you go to bed is recommended to guaranty it will wake you up in the morning. Slide the test switch to the “Test” position and watch for the system send out a signal to the shaker, speaker, and lamp. Check for any loose connections, or problems with the light bulb before contacting the manufacturer. Troubleshooting: If any question arises during the installation and testing, follow through the troubleshooting section b
Inhaltszusammenfassung zur Seite Nr. 16
Inhaltszusammenfassung zur Seite Nr. 17
SPECIFICATION Working Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .433Mhz Memories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Channel one for alarm monitor transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Channel two for KA1000 transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 SIZE KA1000 . .
Inhaltszusammenfassung zur Seite Nr. 18
WARRANTY Krown Manufacturing, Inc. warrants that the Dual Alarm Clock KA1000 sold by Krown Manufacturing, Inc. is free from defects in materials and workmanship under normal use and service for one year. This warranty is applicable only to the original purchaser of the Alarm Clock when accompanied by a sale receipt stating the date of purchase and the name of the company from which purchased. This warranty is in lieu and excludes all other warranties, expressed or implied, including any imp
Inhaltszusammenfassung zur Seite Nr. 19
REGISTERED TRANSMITTERS Record the security code or dip switch with channel jumper of all installed transmitters to this sheet. Use these codes to setup the new transmitters or register them to KA1000 and KA1000EX. You will achieve the same flash pattern if you register the transmitter in the same order. Number Description ________________ _______________________________________________ ________________ _______________________________________________ ________________ _____________
Inhaltszusammenfassung zur Seite Nr. 20
