Inhaltszusammenfassung zur Seite Nr. 1
AM / FM CLOCK RADIO
with DUAL ALARMS
and NAP TIMER
OWNER'S MANUAL
CK5048
Visit our web site at www.emersonradio.com
CK5048_032404.p65 19 24/3/2004, 11:36
Inhaltszusammenfassung zur Seite Nr. 2
CAUTION TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! The lightning flash with arrow- The exclamation point within WARNING: TO REDUCE THE head symbol, within an equi- an equilateral triangle is in- RISK OF ELECTRIC SHOCK lateral triangle is inten
Inhaltszusammenfassung zur Seite Nr. 3
Thank you for purchasing this Emerson Compact AM/FM Clock Radio with Dual Alarms and NAP Timer. The large LED display is designed to be highly visible and easily readable from anywhere in your room. The dual alarms can be set and used independently. And since there are two separate Radio/Buzzer selector switches, you can set one alarm to wake you to buzzer and the other to wake you to radio if you wish. All of the controls are easy to see and easy to use. The radio has a slide rule dial for easy
Inhaltszusammenfassung zur Seite Nr. 4
IMPORTANT NOTES • Avoid installing this unit in places • Operate controls and switches as exposed to direct sunlight or close to described in the manual. heat radiating appliances such as • Before turning on the power, make electric heaters, on top of other stereo certain that the power cord is properly equipment that radiates too much installed. heat, places lacking ventilation or dusty • When moving the set, be sure to first areas, places subject to constant disconnect the AC power cord. vibr
Inhaltszusammenfassung zur Seite Nr. 5
PREPARATION FOR USE UNPACKING AND SET UP •Remove the radio from the carton and remove all packing material from the radio. We suggest that you save the packing material, if possible, in the unlikely event that your radio ever needs to be returned for service. The original carton and packing material is the only safe way to pack your radio to protect it from damage in transit. •Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove any labels or stickers f
Inhaltszusammenfassung zur Seite Nr. 6
TO INSTALL THE BATTERY • Open the battery compartment cover on the bottom of the radio by sliding the cover in the direction of the arrow. • Connect the 9-volt battery to the battery terminal. It can only be connected one way. • Push the battery into the battery compartment and replace the cover. POWER FAILURE INDICATOR If no battery is installed in the radio, or if the battery in the compartment is weak or dead, the time and alarm settings will be lost if the power is interrupted. When th
Inhaltszusammenfassung zur Seite Nr. 7
POWER SOURCE This radio is designed to operate on normal 120V 60Hz AC power only. Do not attempt to operate the radio on any other power source. You could cause damage to the radio that is not covered by your warranty. This radio should be connected to an AC outlet that is always ‘ live’ . Do not connect it to an outlet that is controlled by a wall switch. When the power to the radio is interrupted, the Sure Alarm battery back up system takes over to maintain the time and alarm settings. To maxi
Inhaltszusammenfassung zur Seite Nr. 8
LOCATION OF CONTROLS AND INDICATORS TOP PANEL 6 7 5 8 4 9 ON / OFF 3 10 NAP SLEEP 2 11 1 FRONT PANEL 15 16 17 FM 88 93 98 104 108 MHz 14 AM 530 650 800 1000 1300 1710 KHz 13 18 12 21 19 20 LEFT SIDE PANEL RIGHT SIDE PANEL 22 23 24 7 CK5048_032404.p65 7 24/3/2004, 11:36
Inhaltszusammenfassung zur Seite Nr. 9
1.) SNOOZE/SLEEP OFF) Button. 2.) SLEEP Button. 3.) RADIO ON/OFF Button. 4.) TIME Setting Button. 5.) ALM (Alarm) 1 Setting/Reset Button. 6.) AC Power Cord. 7.) Speaker. 8.) NAP Button. 9.) ALM (Alarm) 2 Setting/Reset Button. 10.) Set UP Button. 11.) Set DOWN Button. 12.) Back Up Battery Compartment (Bottom Cabinet). 13.) ALM (Alarm) 1 ‘On’ Indicator. 14.) AM indicator. 15.) Time Display. 16.) NAP Indicator. 17.) Dial Pointer. 18.) ALM (Alarm) 2 ‘On’ Indicator. 19.) DIMMER (L
Inhaltszusammenfassung zur Seite Nr. 10
OPERATING INSTRUCTIONS SETTING THE CLOCK When you connect the radio to your AC outlet for the first time, the display will begin flashing “12:00” PM (Noon). The flashing will stop when you set the time. 1.) Press and release the TIME button. The display will stop flashing and you can now proceed to set the clock. 2.) Depress the TIME button together with either the UP or DOWN buttons for at least two seconds to move the display forward or backward to the correct time. The display will move rap
Inhaltszusammenfassung zur Seite Nr. 11
SETTING THE WAKE UP TIMES This clock radio has two separate alarms that can be set and used independently. You may use the alarms to wake two people at different times, or you may use one alarm for weekdays and the other for weekend wake up times. The procedure for adjusting the wake up time is the same for both Alarm 1 and Alarm 2. 1.) Depress and hold either the ALM 1 or ALM 2 setting button. The display will change from the correct time to the Alarm 1 or Alarm 2 wake up time. 2.) While holdin
Inhaltszusammenfassung zur Seite Nr. 12
LISTENING TO THE RADIO Note: Set the clock before pressing the RADIO ON/OFF button to turn the radio ‘ On’ for the first time. 1.) Set the BAND selector to the desired band, AM or FM. 2.) Set the VOLUME control to a low setting. 3.) Press the RADIO ON/OFF button to turn the radio ‘ On’ . 4.) Select your desired station with the TUNING control. 5.) Adjust the VOLUME control to the desired setting. 6.) When you are finished listening, press the RADIO ON/OFF button to turn the radio ‘ Off’ . ANTENN
Inhaltszusammenfassung zur Seite Nr. 13
WAKE TO RADIO 1.) Turn the radio ‘ On’ and select the band, station, and volume level that you wish to hear when the alarm comes on, then turn the radio ‘ Off’ again. 2.) Reconfirm the wake up time settings for the alarm you are using, Alarm 1, Alarm 2, or both alarms. 3.) Set the ALARM selector switch for one or both alarms to the ‘ RADIO’ position. The appropriate ALM 1 and/or ALM 2 indicators will light up to confirm that the alarms are set. ALM 1 indicator ALM 2 indicator 4.) At the selected
Inhaltszusammenfassung zur Seite Nr. 14
RADIO AND BUZZER OPERATION You may also set one alarm for wake to radio and the other for wake to buzzer. Just set the ALARM 1 and ALARM 2 selector switches to the desired positions. SNOOZE ALARM After the radio or buzzer alarm sounds in the morning you may press the SNOOZE Bar for a few more minutes sleep. The alarm will stop for approximately 9 minutes and then turn on again. Note: Whenever the SNOOZE Bar is depressed the display changes from normal time to a “minutes and seconds” display. The
Inhaltszusammenfassung zur Seite Nr. 15
NAP TIMER This radio includes a programmable Nap Timer alarm. Use the Nap Timer to wake up after a nap without disturbing your regular alarm settings. The Nap Timer can be used for naps of up to 99 minutes. To set the Nap Timer: 1.) Depress the NAP button. The display will show “n 30”, indicating a 30 minute nap time, and the NAP indicator will light. After 30 minutes the buzzer alarm will turn on. AM indicator NAP indicator 2.) To adjust the length of the Nap Timer depress and hold the NAP but
Inhaltszusammenfassung zur Seite Nr. 16
SLEEP TO MUSIC TIMER You can program the Sleep Timer to play the radio for up to 99 minutes and then shut off automatically. 1.) Depress the SLEEP button. The display will show “L 30”, the radio will turn on, play for 30 minutes and then turn off automatically. 2.) To adjust the length of the Sleep Timer depress and hold the SLEEP button, and repeatedly press either the UP or DOWN buttons until the display shows the desired Sleep time. You can select between 1 minute and 99 minutes. Note: Whe
Inhaltszusammenfassung zur Seite Nr. 17
CARE AND MAINTENANCE There are no user serviceable parts inside this radio. Please refer all service problems to a qualified service facility. See the warranty page of this manual for further details. If the cabinet becomes dusty, wipe the exterior with a soft dust cloth only. Never use dusting sprays or polishes on the cabinet. If the cabinet becomes dirty or smudged with fingerprints it may be wiped with a soft cloth that has been slightly dampened with a mild soap and water solution. Always d
Inhaltszusammenfassung zur Seite Nr. 18
LIMITED WARRANTY Emerson Radio Corp. warrants manufacturing defects in original material, including original parts and workmanship, under normal use and conditions, for a period of ninety (90) days from the date of original purchase in the U.S. With your dated proof of purchase, we will provide repair service at no charge for labor and parts at an authorized Depot Repair Facility, or replace the product in our discretion. For repair or replacement, pack your unit in a padded box, enclose your c
Inhaltszusammenfassung zur Seite Nr. 19
EMERSON Part No. : 16-2945 403-01 Printed in China CK5048_032404.p65 18 24/3/2004, 11:36
