Inhaltszusammenfassung zur Seite Nr. 1
For Your Records and Warranty
Assistance
Model Name: _____________________
Catalog/Model No.: ________________
Serial No.: ________________________
Date Purchased: ___________________
Where Purchased: _________________
For reference also attach your receipt or a
copy of your receipt to the manual.
42639-01 • 4/5/07
Inhaltszusammenfassung zur Seite Nr. 2
Welcome Your new Hunter ceiling fan is an addition to your home or office that ® will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We are proud of our work. We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world. Before installing your fan, for your records and warranty assistance, record information from the carton and Hunter namepl
Inhaltszusammenfassung zur Seite Nr. 3
Installer’s Choice and Optional Accessories Understanding Mounting and Installer’s Choice® Support Brace Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angle mounting. The steps in this manual include Ceiling Standard instructions for all three Installer’s Choice mounting methods. Outlet Box Mounting Style Con
Inhaltszusammenfassung zur Seite Nr. 4
1 • Getting Ready To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: • Electric drill with 9/64” bit • Standard screwdriver (magne
Inhaltszusammenfassung zur Seite Nr. 5
2 • Installing the Ceiling Plate CAUTION: To avoid possible electrical shock, before installing your fan, Isolator disconnect the power by turning off the circuit breakers to the outlet box Ceiling and associated wall switch location. If you cannot lock the circuit breakers Plate in the off position, securely fasten a prominent warning device, such as a tag, to the service panel. 2-1. Drill two pilot holes into the wood support structure through the Step 2-2 outermost holes in the outlet
Inhaltszusammenfassung zur Seite Nr. 6
3 • Assembling and Hanging the Fan Steps 3-2 – 3-3 WARNING: Fan may fall if not assembled as directed in these installation instructions. Downrod 3-1. Unbundle the wires from the fan. For Standard or Angle mounting: 3-2. To assemble fan to hang down from a flat or angled ceiling, insert Canopy the downrod through the canopy and canopy trim ring. Feed the wires from the fan through the downrod. Canopy 3-3. Loosen the square head set screw on the adapter to install the Trim Ring pipe
Inhaltszusammenfassung zur Seite Nr. 7
fsdfsdf 4 • Wiring the Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a Wire Nut qualified electrician. Wall switches are not included. Select an acceptable general-use switch in accordance with national and local electrical codes. 4-1. Before attempting installation, make sure the power is still off. Dual Switch Wiring 4-2. To connect the wires, hold the bare metal leads together and place a wire nut ov
Inhaltszusammenfassung zur Seite Nr. 8
5 • Installing the Canopy and Canopy Trim Ring Step 5-2 Ceiling Plate 5-1. Holding the canopy, raise the fan off the hook. 5-2. Align the slots in the canopy with the tabs on the ceiling plate. 5-3. Raise the canopy over the ceiling plate. Rotate the canopy clockwise until the tabs on the ceiling plate totally engage with the slots in the canopy. 5-4. Partially install the three canopy screws into the canopy one at a Canopy Trim Canopy Ring time. Once all three screws are in, tighten the
Inhaltszusammenfassung zur Seite Nr. 9
6 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, insert Step 6-1 (Detail) them by hand into the holes on the blades. 6-2. If your fan includes medallions: Place each blade between a blade iron and medallion. Install three blade screws to attach the medallion to the blade iron. Repeat for all blades. If your fan includes standard blade irons: Attac
Inhaltszusammenfassung zur Seite Nr. 10
7 • Completing Your Installation With a Light Fixture WARNING: Use only the light fixture supplied with this fan model. Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the 7-1. To attach the upper switch housing, partially install two housing option of installing the fan with OR without the included light fixture. assembly screws into the switch housing mounting plate. The steps below direct you whet
Inhaltszusammenfassung zur Seite Nr. 11
7-6. To attach the lower switch housing, connect the upper plug 7 • Completing Your Installation With a Light Fixture connector from the motor to the lower plug connector in the lower switch housing assembly. 7-5. To attach the lower switch housing, connect the upper plug connector from the motor to the lower plug connector in the Note: Both plug connectors are polarized and will only fit together lower switch housing assembly. one way. Make sure the connectors are properly aligned before
Inhaltszusammenfassung zur Seite Nr. 12
7 • Completing Your Installation With a Light Fixture (Continued) Installing the Glass Bowl 1. First install two B10 candelabra bulbs (60 Watt Maximum) into the sockets. 2. Attach the extra pull chain (included) to the fan pull chain using the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the extra chain.) 3. Thread the fan pull chain through the hole in the metal Light Bulbs (B10 disk. Then, thread the fan pull chain through the hole in Cande
Inhaltszusammenfassung zur Seite Nr. 13
8 • Operating and Cleaning Your Ceiling Fan 8-1. Turn on electrical power to the fan. 8-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low and Off. • Pull the chain slowly to change settings. • Release slowly to prevent the chain from recoiling into the blades. • The chain uses a breakaway connector that separates if the chain is jerked. If this happens, simply reinsert the chain into the connector. 8-3. Ceiling fans work best by
Inhaltszusammenfassung zur Seite Nr. 14
9 • Troubleshooting Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker. 2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing. 4. Push motor reversing switch firmly left or right to ensure that the switch is engaged. 5. Pull the pull chain to ensure it is on. 6. Remove the shipping bumpers. Problem: Noisy operation. 1. Tighten the blade bracket screws until snug. 2. Check
