Bedienungsanleitung Human Touch WholeBody

Inhaltszusammenfassung zur Seite Nr. 1

Oct 10, 2012
REPLACING CALF MASSAGER MOTOR
®
WholeBody 2.0
®
It is imperative that Human Touch products are repaired in a manner that ensures product safety and regulatory compliance and that is fully consistent with the practices used
during the manufacturing process. Therefore, Human Touch requires that all product repairs are performed using only factory-new parts and in accordance with these repair SERVICE LEVEL: 2
instructions. Failure to adhere to these instructions voids the product warr

Inhaltszusammenfassung zur Seite Nr. 2

6. Using a wire cutter, cut the three zip-ties that secure the calf massager cable harness to the calf massager. Note the location of the zip-ties as you will need to install new zip ties in the same location after installing the new calf massager motor. 7. Using a Phillips-head screwdriver, remove the six screws that secure the calf massager motor to the frame (Fig.5). 8. Remove the calf massager motor from the frame (Fig.5). Calf massager motor (Fig.5) INSTALLING THE NEW CALF MASSAGER M