Inhaltszusammenfassung zur Seite Nr. 1
PN: 52750:A ECN 05-680
Fire Alarm Control Panel
MS-9200UDLS
MS-9200UDLSE
IMPORTANT! The SLC Manual Document #51309 must be referenced in addition to this
manual when installing or servicing the Fire Alarm Control Panel.
Document #52750
A
11/04/05 Revision:
Inhaltszusammenfassung zur Seite Nr. 2
While a fire alarm system may lower insurance Fire Alarm System Limitations rates, it is not a substitute for fire insurance! An automatic fire alarm system–typically made up of smoke Heat detectors do not sense particles of combustion and detectors, heat detectors, manual pull stations, audible warn- alarm only when heat on their sensors increases at a prede- ing devices, and a fire alarm control panel with remote notifi- termined rate or reaches a predetermined level. Rate-of-rise cation capa
Inhaltszusammenfassung zur Seite Nr. 3
Adherence to the following will aid in problem-free Installation Precautions installation with long-term reliability: WARNING - Several different sources of power can be con- Like all solid state electronic devices, this system may nected to the fire alarm control panel. Disconnect all sources operate erratically or can be damaged when subjected to of power before servicing. Control unit and associated equip- lightning-induced transients. Although no system is com- ment may be damaged by remo
Inhaltszusammenfassung zur Seite Nr. 4
Notes 4 MS-9200UDLS PN 52750:A 11/04/05
Inhaltszusammenfassung zur Seite Nr. 5
Table of Contents SECTION 1: Product Description ........................................................................................................................12 1.1: Features and Options...................................................................................................................................12 1.2: Specifications ..............................................................................................................................................13 1.2.
Inhaltszusammenfassung zur Seite Nr. 6
Table of Contents 3.4: Programming Screens Description..............................................................................................................44 3.5: Programming and Passwords ......................................................................................................................44 3.6: Master Programming Level.........................................................................................................................46 3.6.1: Autoprogram .........
Inhaltszusammenfassung zur Seite Nr. 7
Table of Contents 3.6.9: Option Modules................................................................................................................................96 3.6.9.1 Annunciators/UDACT ............................................................................................................96 3.6.9.2 Onboard DACT .......................................................................................................................97 3.6.9.2.1 Onboard DACT Enable ..................
Inhaltszusammenfassung zur Seite Nr. 8
Table of Contents 4.22.2: Zones ...............................................................................................................................................142 4.22.3: Power...............................................................................................................................................143 4.22.4: Trouble Reminder............................................................................................................................144 4.22.5: T
Inhaltszusammenfassung zur Seite Nr. 9
It is imperative that the installer understand the requirements of the Authority Having Jurisdiction (AHJ) and be familiar with the standards set forth by the following regulatory agencies: • Underwriters Laboratories Standards • NFPA 72 National Fire Alarm Code • CAN/ULC - S527-99 Standard for Control Units for Fire Alarm Systems Before proceeding, the installer should be familiar with the following documents. NFPA Standards NFPA 72 National Fire Alarm Code NFPA 70 National Electrical Code Und
Inhaltszusammenfassung zur Seite Nr. 10
CAUTION! HIGH VOLTAGE TRANSFORMER 2 TRANSFORMER 1 10 MS-9200UDLS PN 52750:A 11/04/05 Notification Appliance Circuits EIA-232 NAC #1, #2, #3 & #4, Style Y (Class B) (Supervised, Power Limited) to printer or (Special Application) 2.5 amps max. per circuit. JP6 configured personal computer for Class B using NACKEY card. Basic System Connections (See Style Z illustrated near right edge of board). (nonsupervised) 5 4 3 2 1 For EDP-listed equipment or NAC #1 NAC #3 NAC #4 NAC #2 9 8
Inhaltszusammenfassung zur Seite Nr. 11
Peripheral Devices and Their Documents: ACM-8RF AFM-16ATF & ACS Series Doc. #50362 AFM-32AF 51480 Doc. #15970 ACS (EIA-485) Annunciators LDM-32F AFM-16AF Doc. #50055 Doc. #15210 TERM (EIA-485) LCD-80F Annunciators Doc. #51338 SLC Loop Addressable Devices and SLC Wiring Doc. #51309 Battery Connector CHG-75 Charger CHG-120F Charger Doc. # 51315 Doc. #50888 MS-9200UDLS PN 52750:A 11/04/05 11 92udperi.cdr
Inhaltszusammenfassung zur Seite Nr. 12
Product Description Features and Options SECTION 1 Product Description The Fire-LiteMS-9200UDLS is a combination FACP (Fire Alarm Control Panel) and DACT (Digital Alarm Communicator/Transmitter) all on one circuit board. This compact, cost effective, intelligent addressable control panel has an extensive list of powerful features. The combination of Fire-Lite’s newer series devices and legacy 300 Series devices, along with the MS-9200UDLS FACP, offer the latest in fire protection technol
Inhaltszusammenfassung zur Seite Nr. 13
Specifications Product Description • Telephone Line Active LEDs • Communication Confirmation (Kissoff) LED • Touchtone/Rotary dialing • Programmable Make/Break Ratio • EIA-232 Printer/PC interface (variable baud rate) • 80-character LCD display (backlit) • Real-time clock/calendar with daylight savings time control • History file with 1,000 event capacity • Advanced fire technology features: Automatic drift compensation Maintenance alert Detector sensitivity test capability (NFPA 72 complian
Inhaltszusammenfassung zur Seite Nr. 14
Product Description Specifications Battery (Lead Acid Only) - J9 Maximum Charging Circuit: Normal Flat Charge - 27.6 VDC @ 0.80 amp Maximum Battery Charger Capacity: 18 Amp Hour (MS-9200UDLS cabinet holds maximum of two 18 Amp Hour batteries. For greater than 25 Amp Hour up to 120 Amp Hour batteries, use the CHG-75 or CHG-120F Battery Charger and BB-55F Battery Box. Note: Jumper JP5, on the FACP main circuit board, must be removed to disable the FACP battery charger when using an externa
Inhaltszusammenfassung zur Seite Nr. 15
Specifications Product Description EIA-485 (TERM) or EIA-232 (ACS) - TB8 EIA-485 Terminal Mode annunciator connections: Terminal 1 (Out +), 2 (In +), 3 (Out -), 4 (In -) EIA-232 PC/Printer applications connections: Terminal 1 (Transmit), 2 (Receive), 3 (Ground) EIA-485 (ACS) - TB9 ACS annunciator connector, Terminal 1 (+) and Terminal 2 (-), requires ferrite bead 1.2.1 Current Availability The following figure illustrates the maximum current that is possible for each panel circuit and the to
Inhaltszusammenfassung zur Seite Nr. 16
Product Description Controls and Indicators 1.3 Controls and Indicators LCD Display The FACP uses an 80-character HONEYWELL LIFE SAFETY (4 lines X 20 characters) high viewing angle LCD display. The SYSTEM ALL NORMAL display includes a long life LED 10:00A 012102 backlight that remains illuminated. If AC power is lost and the system is not in alarm, the LED backlight will turn off to conserve batteries. LED Indicators LED indicators are provided to annunciate the following conditions:
Inhaltszusammenfassung zur Seite Nr. 17
Circuits Product Description 1.4 Circuits SLC Communication Loop One SLC loop is provided standard on the FACP main circuit board. The SLC loop, configurable for NFPA Style 4, 6 or 7, provides communication to addressable detectors, monitor (initiating device) and control (output device) modules. Refer to the SLC Wiring manual for information on wiring devices. Reference Output Circuits Manual The following output circuits are available on the FACP: • Special Application Power 24 VDC Res
Inhaltszusammenfassung zur Seite Nr. 18
Product Description Components 1.6 Components Main Circuit Board The main circuit board contains the system’s CPU, power supply, other primary components and wiring interface connectors. The 4XTMF option module plugs in and is mounted to the main circuit board. Cabinet See Page The MS-9200UDLS backbox provides space for two batteries (up to 18 Amp Hour). Ample knockouts are provided for system wiring. Also available is an optional dress panel (DP-9692), which mounts to the inside of th
Inhaltszusammenfassung zur Seite Nr. 19
Components Product Description 1.6.2 Intelligent Addressable Modules: Newer Series The newer series of Control Modules and Monitor Modules provide an interface between the control panel and conventional notification and initiating devices. Each module can be set to respond to an address with built-in rotary switches. The maximum address cannot exceed address 99. Note that a blinking LED on an addressable module indicates communication between the module and the control panel. These dev
Inhaltszusammenfassung zur Seite Nr. 20
Product Description Optional Modules 1.7 Optional Modules The MS-9200UDLS main circuit board includes option module connectors for the following module: 4XTMF Transmitter Module The 4XTMF provides a supervised output for local energy municipal box transmitter, alarm and trouble reverse polarity. It includes a disable switch and disable trouble LED. A jumper on the module is used to select an option which allows the reverse polarity circuit to open with a system trouble condition if no ala
