Inhaltszusammenfassung zur Seite Nr. 1
electric clipper
Model 47082
Set up and Operating inStructiOnS
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
SaVe thiS Manual.
© ®
Copyright 2008 by Harbor Freight Tools . All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools. Diagrams
within this manual may not be dra
Inhaltszusammenfassung zur Seite Nr. 2
SpeciFicatiOnS Comb Attachment (w/ 4 Settings) Barber Comb Accessories Cleaning Brush Scissors e316219 Lubricant (One Tube) Electrical Input 120 V~, 60 Hz, 8-13 W Save this Manual You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Write the product’s serial number in the back of
Inhaltszusammenfassung zur Seite Nr. 3
5. keep the cord away from heated surfaces. 6. never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and the like. 7. never drop or insert any object into any opening. 8. do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered. 9. do not use this appliance with a damaged or broken comb. 10. t o reduce the risk of electric shock, the clipper is equipped with a polarized plug (one blade is
Inhaltszusammenfassung zur Seite Nr. 4
unpacking When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. OperatiOn inStructiOnS blade alignment • The Clipper comes oiled and aligned from the factory. Blades must be realigned after they have been removed for cleaning or replacement. 1. To realign blades, match the upper and lower blades teeth up, point for point. The end o
Inhaltszusammenfassung zur Seite Nr. 5
• Before turning the Clipper off, rapidly move the Blade Lever from close cut to longer cut twice. This will clear trimmings from the Clipper. cutting hair Attachment Comb #1 leaves 3mm (1/8 inch) hair length. Attachment Comb #2 leaves 6mm (1/4 inch) hair length. Attachment Comb #3 leaves 9mm (3/8 inch) hair length. Attachment Comb #4 leaves 12mm (1/2 inch) hair length. • The Comb’s sizes are marked on the outside middle surface. To apply a Comb, hold it with the teeth upwards and slide it o
Inhaltszusammenfassung zur Seite Nr. 6
8. Change to Comb #3 or #4 and, working upwards, cut the hair on the back and top of the head (see diagram 2 & diagram 3). 9. Using Comb #3 or #4, cut hair on top of head from back to front, against the direction in which the hair normally grows. In some cases, this may require changing direction (see diagram 4). 10. Comb #1 or #2 can be used to achieve very close “crew” cuts. 11. For longer hair, use the provided comb to lift the hair away from the top of the head. Cut over the comb with
Inhaltszusammenfassung zur Seite Nr. 7
13. To cut the sideburns, change Comb to #1 or #2. To produce a clean, straight line for the sideburns, reverse the Clipper by turning the bottom side upwards (see diagram 7). 14. Press the Clipper at a right angle to the head, with the tips of the blades lightly touching the skin and work downwards to obtain a clean, razor-like cut. 15. Comb through hair to check for uneven strands and ensure an even cut. Short tapered styles 1. Starting with Comb #4, cut from the back of the head to the to
Inhaltszusammenfassung zur Seite Nr. 8
pleaSe read the FOllOWing careFully the ManuF acturer and/Or diStribut Or haS prOVided the partS liSt and aSSeMbly diagraM in thiS Manual aS a reFerence t OOl Only. neither the ManuF acturer Or diStribut Or MakeS any repreSentatiOn Or Warranty OF any kind t O the buyer that he Or She iS qualiFied t O Make any repairS t O the prOduct, Or that he Or She iS qualiFied t O replace any partS OF the prOduct. in Fact, the ManuF acturer and/Or diStribut Or expreSSly StateS that all repairS and pa
