Bedienungsanleitung Graco 1501

Inhaltszusammenfassung zur Seite Nr. 1

PARTS LIST
CHECK that you have all the parts listed
Failure to follow these warnings and the assembly
below BEFORE assembling your swing.
instructions could result in serious injury or death.
If any parts are missing, call Customer
Non-Stop
Service at 1-800-345-4109.
by
Tools required: Screwdriver and wrench
®
OWNER’S
(wrench included)
MANUAL
Model No. __________
Serial No. __________
Dear Customer,
Please fill in the
model and serial
numbers above
Infant carrier Cradle
from the label
beneath th

Inhaltszusammenfassung zur Seite Nr. 2

PARTS LIST CHECK that you have all the parts listed Failure to follow these warnings and the assembly below BEFORE assembling your swing. instructions could result in serious injury or death. If any parts are missing, call Customer Non-Stop Service at 1-800-345-4109. by Tools required: Screwdriver and wrench ® OWNER’S (wrench included) MANUAL Model No. __________ Serial No. __________ Dear Customer, Please fill in the model and serial numbers above Infant carrier Cradle from the label beneath th

Inhaltszusammenfassung zur Seite Nr. 3

Step 2. Attaching the Legs Attaching the Hanger Adjusting the Handle Push down Snap handle and hinges Hold tube To bring carrier handle from on center Step 1. Step 1. together to lock. Be sure vertically of handle resting position into position for handle is locked into the Push oval end of the upper leg With crossbar of hanger carrying or swinging, first set plastic hinges. sections firmly onto the four toward front of the motor unit, the carrier down. Then push Flattened plastic pegs. Hold tub

Inhaltszusammenfassung zur Seite Nr. 4

Step 2. Attaching the Legs Attaching the Hanger Adjusting the Handle Push down Snap handle and hinges Hold tube To bring carrier handle from on center Step 1. Step 1. together to lock. Be sure vertically of handle resting position into position for handle is locked into the Push oval end of the upper leg With crossbar of hanger carrying or swinging, first set plastic hinges. sections firmly onto the four toward front of the motor unit, the carrier down. Then push Flattened plastic pegs. Hold tub

Inhaltszusammenfassung zur Seite Nr. 5

Step 6. Starting the Swing Swing Replacement Parts FOR SAFE BATTERY USE: Close the tray. CHECK that CHECK that all parts are Instructions for ordering swing parts: tray is latched. securely fastened together DO NOT REMOVE OR INSERT THE Complete form below. Your swing model number MUST before using the swing. BATTERIES WITH BABY IN SWING. Hanger be included on the form to ensure proper replacement THE BATTERIES COULD FALL ON parts. Your model number can be found on a sticker BABY IF DROPPED. Step

Inhaltszusammenfassung zur Seite Nr. 6

Step 6. Starting the Swing Swing Replacement Parts FOR SAFE BATTERY USE: Close the tray. CHECK that CHECK that all parts are Instructions for ordering swing parts: tray is latched. securely fastened together DO NOT REMOVE OR INSERT THE Complete form below. Your swing model number MUST before using the swing. BATTERIES WITH BABY IN SWING. Hanger be included on the form to ensure proper replacement THE BATTERIES COULD FALL ON parts. Your model number can be found on a sticker BABY IF DROPPED. Step