Inhaltszusammenfassung zur Seite Nr. 1
Owner’s Manual
Rear Wheel Drive Power Chair
Model GP160
Inhaltszusammenfassung zur Seite Nr. 2
Lite Rider PTC_Owner’s Manual Rev A_121911
Inhaltszusammenfassung zur Seite Nr. 3
LiteRider PTC_Owner’s Manual Rev A_121911 Thank you for purchasing your LiteRider PTC (Personal Transport Chair). We are honored you have chosen Golden Technologies for your mobility needs. LiteRider PTC Model GP160
Inhaltszusammenfassung zur Seite Nr. 4
LiteRider PTC_Owner’s Manual Rev A_121911 CONTENTS I. Introduction……………………………………………………………………………………… 4-5 II. Safety…………………………………………………………………………………………….. 6-9 III. EMI/RFI………………………………………………………………………………………….. 10 IV. Assembly of your GP160…………………………………………………………………... 11-15 V. Disassembly and Battery Replacement…………………………………………………... 16 VI.
Inhaltszusammenfassung zur Seite Nr. 5
LiteRider PTC_Owner’s Manual Rev A_121911 I. INTRODUCTION Congratulations on the purchase of your new LiteRider PTC (Personal Transport Chair). The LiteRider PTC, combines cutting edge technology with attractive designs that are also highly functional in today’s world. We at Golden Technologies, Inc. know that you have chosen a power chair tha
Inhaltszusammenfassung zur Seite Nr. 6
LiteRider PTC_Owner’s Manual Rev A_121911 I. INTRODUCTION ACCESSORIES for the LiteRider PTC: (Personal Transport Chair) A variety of accessories are available for your Golden LiteRider PTC. Please contact your Authorized Golden Technologies Dealer for more information or to order. • Cane Holder Tube • Crutch Holder • Oxygen Tank Holder • Saf
Inhaltszusammenfassung zur Seite Nr. 7
LiteRider PTC_Owner’s Manual Rev A_121911 II. SAFETY Your Golden LiteRider PTC is a battery-operated personal mobility vehicle. Please exercise caution and consideration when you are operating it. Driving your LiteRider PTC carefully and thoughtfully will help ensure your personal safety and the safety of other people. Note: Before learning
Inhaltszusammenfassung zur Seite Nr. 8
LiteRider PTC_Owner’s Manual Rev A_121911 II. SAFETY DRIVING ON AN INCLINE • Drive with caution when attempting to negotiate any incline, even handicap access ramps. • Always climb or descend a gradient by d
Inhaltszusammenfassung zur Seite Nr. 9
LiteRider PTC_Owner’s Manual Rev A_121911 II. SAFETY SAFETY RULES • Do not attempt to use your LiteRider PTC on an escalator. Always use an elevator. • Do not carry passengers on your power chair. • Do not operate your LiteRider PTC, if it is not functioning properly. • Use caution when driving on soft or uneven surfaces such as grass, gra
Inhaltszusammenfassung zur Seite Nr. 10
LiteRider PTC_Owner’s Manual Rev A_121911 II. SAFETY Please be sure to follow this important warning when transferring onto or off the Golden LiteRider PTC: (Personal Transport Chair) NEVER TRANSFER ON OR OFF OF THIS POWER WHEELCHAIR USING THE SEAT BACKREST FOR SUPPORT DURING TRANSFER. THE SEAT BACK MAY FOLD DOWN AND MAY CAUSE YOU TO LOS
Inhaltszusammenfassung zur Seite Nr. 11
LiteRider PTC_Owner’s Manual Rev A_121911 III. EMI/RFI The rapid development of electronics, especially in the area of communications, has saturated our environment with electromagnetic (radio) waves that are
Inhaltszusammenfassung zur Seite Nr. 12
LiteRider PTC_Owner’s Manual Rev A_121911 IV. ASSEMBLY Your LiteRider PTC is shipped partially disassembled in order to maximize the protection of all its parts during the shipping process. Please follow the instructions below to quickly and easily assemble the power chair for your use. NOTE: You will need only basic tools. If you do not have
Inhaltszusammenfassung zur Seite Nr. 13
LiteRider PTC_Owner’s Manual Rev A_121911 IV. ASSEMBLY Before operating or assembling your LiteRider PTC, be sure to remove the battery deactivate strip and connect the joystick cable to the VR2 controller. Your LiteRider PTC will not power up or operate without completing these steps. 1. Remove the battery pack by pulling up on the handle
Inhaltszusammenfassung zur Seite Nr. 14
LiteRider PTC_Owner’s Manual Rev A_121911 IV. ASSEMBLY Seat Installation 1. Fold the seat back down. 2. Grasp the seat firmly on each side, lift the seat and align the seat pin with the hole in the seat post receiver. See figure 4.
Inhaltszusammenfassung zur Seite Nr. 15
LiteRider PTC_Owner’s Manual Rev A_121911 IV. ASSEMBLY Arm Installation 1. Loosen the arm width adjustment screw from the arm receiver tube at the bottom rear of the seat frame with a 4mm Allen wrench. See figure 5. 2. Insert the arm into the arm receiver tube, so that the a
Inhaltszusammenfassung zur Seite Nr. 16
LiteRider PTC_Owner’s Manual Rev A_121911 IV. ASSEMBLY Joystick Installation 1. Loosen the joystick bracket adjustment screw located under the armrest. See figure 6. 2. Insert the joystick mounting tube into the joystick bracket under the armrest. 3. Adjust the position of the joystick to a comfortable spot. 4. Tighten the joystick adjustme
Inhaltszusammenfassung zur Seite Nr. 17
LiteRider PTC_Owner’s Manual Rev A_121911 V. DISASSEMBLY and BATTERY REPLACEMENT To disassemble your LiteRider PTC, simply reverse the assembly process. See pages 11-15. Make certain that the controller power is turne
Inhaltszusammenfassung zur Seite Nr. 18
LiteRider PTC_Owner’s Manual Rev A_121911 VI. COMFORT SETTINGS You may be spending a great deal of time on your LiteRider PTC. To provide you with the maximum seating comfort, Golden Technologies, Inc. has designed this power chair to incorporate the following adjustments for operator comfort. COMFORT SETTINGS
Inhaltszusammenfassung zur Seite Nr. 19
LiteRider PTC_Owner’s Manual Rev A_121911 VI. COMFORT SETTINGS Arm Width Adjustment 1. Loosen the adjustment screw at the rear of the seat with a 4mm Allen wrench. See figure 9. 2. Slide the arm in or out to the desired width. 3. Tighten
Inhaltszusammenfassung zur Seite Nr. 20
LiteRider PTC_Owner’s Manual Rev A_121911 VI. COMFORT SETTINGS Footrest Angle Adjustment 1. Fold the footrest upward for easy access to the angle adjustment bolt. See figure 11. 2. Turn the jam nut counter-clockwise with a 17mm wrench to loosen. 3. Use an 8mm Allen wrench to turn the adjustment bolt. Turn the adjustment bolt counter-cl
