Inhaltszusammenfassung zur Seite Nr. 1
®
CUSTOM EDITION
Please read this manual and save it
with your original sales receipt.
Tools needed for assembly: Phillips Screwdriver
(not included); Assembly Tool (included). Use only with
®
a Power Wheels 12 Volt Lead Acid Rechargeable Battery
®
with Built-in Thermal Fuse and Power Wheels
12 Volt Charger with Type 12V Connector (both included).
Requires four "C" (LR14) alkaline batteries (not included)
for FM Radio operation.
Product features may vary
from the picture above.
Owner's Man
Inhaltszusammenfassung zur Seite Nr. 2
A TABLE OF CONTENTS TABLE OF CONTENTS A Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 B Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 C Parts . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 3
WARNINGS AND CAUTIONS B ELECTRICAL HAZARD WARNING • Battery can fall out and injure a child if vehicle tips over. Always use battery retainer. • PREVENT FIRE - Never modify the electrical system. Alterations could cause a fire resulting in serious injury and could also ruin the electrical system. - Use of the wrong type battery or charger could cause a fire or explosion resulting in serious injury. ® ® - Use of Power Wheels components in products other than Power Wheels vehicles could
Inhaltszusammenfassung zur Seite Nr. 4
C PARTS � If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. � Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. Note: Some parts of this product have been packed with a protective foam cover. After removing the foam cover, you may notice a cloudy film on the parts. Wipe these parts with a clean, dry,
Inhaltszusammenfassung zur Seite Nr. 5
PARTS C Steering Column 2 Front Wheels (Left and Right) Steering Wheel 2 Wheel Covers Steering Wheel Cap 2 Wings Speaker Box (Left and Right) Assembly 2 Headlights 2 Door Plates Steering Column Cap (Left and Right) 2 Bushings 2 Hubcaps 2 Taillights (Left and Right) M0409pr-0920 5
Inhaltszusammenfassung zur Seite Nr. 6
C PARTS 12 Volt Battery 2 Short Seat Belts 12 Volt Charger 7 3 / " Washer – 2 / " -16 Lock Nut – 2 16 8 Long Seat Belt 5 1 /32" x 1 /2" Pin – 1 3 #8 x / " Screw – 37 4 Assembly Tool 1 1 / x 1 / " Screw – 2 4 4 For your convenience, we included extra fasteners! Note: Tighten and loosen all screws with a Phillips screwdriver. Do not over-tighten the screws. Key Assembly Fasteners Shown Actual Size M0409pr-0920 6
Inhaltszusammenfassung zur Seite Nr. 7
PARTS PICTURE D Note: Some parts shown are assembled on both sides of the vehicle. 11 11 10 12 28 19 13 25 29 8 20 22 7 9 2 6 1 18 17 3 14 16 15 21 27 4 23 5 26 24 Parts Not Shown 1 Vehicle 9 Door Plates - 2 17 Bushing - 2 25 Key Assembly 7 3 2 Front End 10 Seat 18 / " Washers - 2 26 Assembly Tool 16 / "-16 Lock Nuts - 2 8 1 1 3 Bumper 11 Short Seat Belts - 2 19 Speaker Box Assembly 27 Steering Column Cap / " x 1 / " Screws - 2 4 4 3 4 Grille 12 Long Seat Belt 20 Steering Wheel 28 Steering
Inhaltszusammenfassung zur Seite Nr. 8
E BATTERY CHARGING ELECTRICAL HAZARD CAUTION WARNING • Battery can fall out and injure a child Use the charger in dry locations only. if vehicle tips over. Always use battery retainer. About Thermal Fuses • PREVENT FIRE Your Power Wheels 12 volt battery is equipped with a built-in - Never modify the electrical system. thermal fuse. The thermal fuse is a self-resetting safety device which Alterations could cause a fire resulting automatically “trips” and shuts down operation of the vehicl
Inhaltszusammenfassung zur Seite Nr. 9
E BATTERY CHARGING ASSEMBLY F WARNING Power Indicator Children can be harmed by small parts, sharp edges and sharp points in the B vehicle's unassembled state, or by electrical items. Care should be taken in unpacking battery and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle. A Charger Connector A � Plug the charger connector into the battery . B � Plug the charger into a standard wall outlet . Notes: - If power fl
Inhaltszusammenfassung zur Seite Nr. 10
F ASSEMBLY 3 /8" -16 Lock Nut Front Axle Front Wheel 4 Assembly Tool 2 3 � Place a /8" -16 lock nut (rounded side out) onto a front axle. Hint: There is a right and a left front wheel. Place the right wheel IMPORTANT: Tighten the lock nut firmly using the closed end of the (marked R) on the passenger side of the vehicle, and the left wheel assembly tool. (marked L) on the driver side of the vehicle. � Repeat this procedure to fasten the other front wheel assembly with � Place a front wheel o
Inhaltszusammenfassung zur Seite Nr. 11
ASSEMBLY F Front End Battery Compartment 8 TOP VIEW Vehicle 1 1 " " � Insert two /4 x 1 /4 screws inside of the battery compartment and 6 into the front end of the vehicle. Tighten the screws. � Fit the front end onto the vehicle. � Insert the tabs on the back edge of the front end into the slots in the vehicle. Front End Front End Bumper 9 RIGHT SIDE VIEW � Fit the bumper onto the front end. 7 3 " � Insert two #8 x /4 screws through the front end and into the vehicle. Tighten the screws. M0
Inhaltszusammenfassung zur Seite Nr. 12
F ASSEMBLY Bumper 10 Grille 3 " � Insert seven #8 x /4 screws into the bumper and tighten. 12 3 " � Insert two #8 x /4 screws the top of the grille. Tighten the screws. Grille 30 Bumper 29 11 13 � Fit the grille onto the bumper. � Push down to fit the tabs on the grille into the slots in the bumper. � Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. � Place the labels exactly as shown in the illustration. � For best results, avoid
Inhaltszusammenfassung zur Seite Nr. 13
ASSEMBLY F Doors Headlights 14 16 � Fit the headlights (left and right) onto the bumper. � Fit the door pegs onto the holes near the front end of the vehicle. Hint: There is a left and right door. They are designed to be assembled one way. Plates Headlights 15 3 " � Insert two #8 x /4 screws into the top edge of each headlight. Tighten the screws. 17 � Fit the large hole on the plates to the door posts. � Align the holes in the plates with the holes in the top side of the vehicle. M0409pr-0920
Inhaltszusammenfassung zur Seite Nr. 14
F ASSEMBLY Windshield/Dash Dash Connectors Radio Connectors 18 20 3 " � Insert three #8 x /4 screws into each plate and tighten. � Open the doors on the vehicle. � Place the windshield/dash on top of the front end of the vehicle. � Plug both dash connectors together. � Plug both radio connectors together. Motor Harness Hint: If the connectors do not fit together, do not force them. Simply Connector Dash turn one of them over and try again! Connector Front Windshield/ Dash Radio Connector 1
Inhaltszusammenfassung zur Seite Nr. 15
ASSEMBLY F IMPORTANT! Turn the vehicle on its side or over to complete assembly steps 24-29. A B Steering Metal Vehicle Column Bar Hole Hole 22 3 " � Insert four #8 x /4 screws into the base of the windshield/dash. 24 BOTTOM VIEW Tighten the screws. � Wipe the steering column with a paper towel to remove any excess lubricant. � First, insert the straight end of the steering column down through the hole in the metal bar A ; then through the hole in the vehicle Dash floor B ; and finally, o
Inhaltszusammenfassung zur Seite Nr. 16
F ASSEMBLY Large Opening Steering Wheel Cap Steering Wheel Steering Column 28 26 DASH VIEW � Insert and "snap" the steering wheel cap into the center of the steering wheel. � Position the steering wheel so that the large opening is UP. � Fit the steering wheel onto the steering column. Steering Column Cap P Press Wheel Press Wheel ress Wheel 29 � Fit the steering column cap onto the end of the Lift Steering steering column. 27 3 Column " � Insert a #8 x / screw through the large opening in th
Inhaltszusammenfassung zur Seite Nr. 17
ASSEMBLY F 1.5V x 4 "C" (LR14) Key Assembly Battery Safety Information In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage: � Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium). � Insert batteries as indicated inside the battery compartment. � Remove batteries during long periods of non-use. Always remove exhausted batteries
Inhaltszusammenfassung zur Seite Nr. 18
F ASSEMBLY TOP VIEW Seat Hood Tab Slot 32 34 Slots � Lower and fit the side tabs on the hood into the slots on each side � Insert the two tabs on the front edge of the seat into the slots in of the front end of the vehicle. the vehicle. Short Seat Belts Seat Seat Long Seat Belt 33 � Insert the fastener end of a short seat belt strap through the slot 35 BACK VIEW near the outer edge of the seat. Make sure the side of the seat belt with the fastener faces the outer edge of the seat. 3 " � Inser
Inhaltszusammenfassung zur Seite Nr. 19
ASSEMBLY F Wings 13 14 Taillight Tabs 36 38 � Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. � Fit the wing tabs into the slots in the top edge near the rear of � First apply the inside edge of a label to the back end of the the vehicle. vehicle. Next, apply the outside edge of the label to the side of Hints: the vehicle. Then, smooth the center of the label. (The edges will � There is a left and right wing. They are designed to
Inhaltszusammenfassung zur Seite Nr. 20
F ASSEMBLY Speaker Box Assembly Speaker Connector Speaker Connector 40 42 � Position the speaker box assembly over the back end of the vehicle. � Plug both speaker connectors together. 3 " � Insert three #8 x /4 screws into the top of the speaker assembly. Hint: If the connectors do not fit together, do not force them. Simply Tighten the screws. turn one of them over and try again! Assembly is now complete. Speaker Box Assembly 41 � Fit the speaker box assembly onto the vehicle. M0409pr-0920 2
