Inhaltszusammenfassung zur Seite Nr. 1
EQ350HQ
1/3” 520TVL High-Res. Color Camera
User’s Manual
and
Operation Instructions
Inhaltszusammenfassung zur Seite Nr. 2
Notice This manual is presented to the users of EQ350HQ by EverFocus Electronics Corp. With years of engineering researches, EverFocus has spared no effort to provide the high quality products to the worldwide users. For the policy of continual product improvement, EverFocus reserves the right to make changes to the product specifications and documentation without notice. All the components of the products, including accessories, components, and outlook, are bas
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Safety Warning ………………………………………… 1 Introduction…………………………………………… ..2 Specification…………………………………………….3 Major Parts and Their Functions………………… .… ..4 Installation Instructions………………………… .… .… 8
Inhaltszusammenfassung zur Seite Nr. 4
Safety Warning 1. Handle the camera with care. Be careful when handling the camera, do not drop it or subject it to strong shock or vibration to prevent any damages to it. Do not disassemble it or place it on an unstable base. 2. Do not install the camera near electric or magnetic fields. Installed the camera away from TV, radio transmitter, magnet, electric motor, transformer, audio speakers because the magnetic fields generate from above devices will distort the video
Inhaltszusammenfassung zur Seite Nr. 5
Introduction The new EQ350HQ series is a solid-state color video camera specially designed for high quality surveillance applications. It incorporates break through DSP technology that provides most reliable and accurate color picture in security industry. The camera is convenient to use with C-mount or CS-mount lenses and easy back-focus adjustment help to achieve installation efficiency. Main Features : ?? 1/3” color CCD pick up device for more than 520 TV l
Inhaltszusammenfassung zur Seite Nr. 6
Specification Pickup device: 1/3 interline transfer color CCD Video format: NTSC/PAL Picture element: NTSC: 768(H) x 494(V) PAL: 752(H) x 582(V) Horizontal resolution: 520TV lines Video output: BNC VBS 1.0Vp-p, 75ohm Sensitivity: 1.0lux/F=1.2 S/N ration: Over 48dB Electronic shutter: Up to 1/100,000 Back light comp.: ON/OFF switch Auto Gain Control: ON/OFF switch Auto White Balance: Digital auto tracing Flickerless:
Inhaltszusammenfassung zur Seite Nr. 7
Major Parts Names and Their Functions 1 2 3 Front Side 6 5 7 Side 8 Top 9 10 11 12(optional) 12(optional) 9 9 10 11 Rear (EQ350HQ) Rear(EQ350HQA) 4
Inhaltszusammenfassung zur Seite Nr. 8
1. Focal Length Adjustment Ring Use this ring to adjust the appropriate focal length according to the type of lens. Rotate the ring clockwise for the CS-mount lens, rotate it counterclockwise for the C-mount lens. The factory setting is C-mount. 2. Lens Mount To mount an appropriate C-mount or CS-mount lens. 3. Locking Screw Use the locking screw to fix the focal length. 4. Lens Connector (4 pin socket) To connect to the lens plug of the auto iris lens. 5. Control Switches There
Inhaltszusammenfassung zur Seite Nr. 9
ES (Electronic Shutter) Off/On ES ON: The camera continuously adjusts the shutter speed from 1/60 (NTSC), 1/50 (PAL) second to 1/100,000 second according to the luminance conditions of the scene. ES OFF: The shutter speed is fixed at 1/60 (NTSC), 1/50 (PAL) second. Set ES OFF, when auto iris lens is used or flicker is observed under a very bright fluorescent lamp. Otherwise, turn ES on for optimum performance. The default setting is ON. AGC (Automatic Gain Control) Off/On AGC ON: The s
Inhaltszusammenfassung zur Seite Nr. 10
VD/DD (Auto Iris lens Type) For video drive auto iris lens, please set switch to VD. For direct drive iris lens, set switch to DD. The default setting is DD. Wire the cable of lens to lens connector according to the following table. Pin1 Pin2 Pin3 Pin4 Lens Connector Video Drive +12V GND VD-IRIS GND 1 3 2 4 Direct Drive Cnt- Cnt+ Drv+ Drv- 6. IRIS Level Control Brightness Level can be adjusted from the IRIS level VR while using the direct drive lens
Inhaltszusammenfassung zur Seite Nr. 11
Installation Instructions 1. Remove the cover cap from the top of the lens mount. 2. To attach a C-mount/CS-mount lens, turn the focal length adjustment ring to the appropriate position. Note: If a C-mount lens is used, please make sure the focal length adjustment ring is set at C position before fixing the lens. 3. Screw the lens firmly onto the lens mount. Insert the lens plug in the lens connector if the auto iris lens is used. 4. Tighten the locking screw. 5. Connect the video
Inhaltszusammenfassung zur Seite Nr. 12
EverFocus Electronics Corp. Head Office: European Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Albert-Einstein-Strasse 1 Hsi-Chi, Taipei, Taiwan D-46446 Emmerich, Germany TEL: +886-2-26982334 FAX: +886-2-26982380 TEL: 49-2822-9394-0 www.everfocus.com.tw FAX: 49-2822939495 www.everfocus.de USA Office: 2445 Huntington Drive, San Marino, Beijing Office: CA 91108, U.S.A. Room 609, Technology Trade TEL: +1-626-844-8888 Building, FAX: +1-626-844-8838 Shandg
