Inhaltszusammenfassung zur Seite Nr. 1
Operating Instructions
™
11 BAND
HIGH-PERFORMANCE
RADAR/LASER DETECTOR
WITH XTREME RANGE
™
SUPERHETERODYNE
TECHNOLOGY
Printed in China
PRO 9580 Part No. 480-134-P
®
Nothing comes close to a Cobra English
Inhaltszusammenfassung zur Seite Nr. 2
Important Information And Customer Assistance Introduction Important Information • Federal Laws Governing The Use Of Radar Detectors It is not against federal law to receive radar transmissions with your Cobra radar/ laser detector. The Communications Act of 1924 guarantees your right to receive radio transmissions on any frequency. Local laws that contravene this Act, while illegal, may be enforced by your local law enforcement officials until and unless they are prohibited from doing so b
Inhaltszusammenfassung zur Seite Nr. 3
Controls, Indicators And Connections Display And Product Features Table Of Contents Introduction Introduction Introduction Controls, Indicators And Connections Display • • Introduction Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A1 Windshield Windshield Bracket Customer Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A1 Bracket Mount Release Button Controls, Indicators And Connections . . . .
Inhaltszusammenfassung zur Seite Nr. 4
Installation Installation Your Detector Your Detector Installation Windshield Mounting • Where To Mount Your Unit You will get optimum performance from your detector if you Mount it at a 1. Attach the rubber point approximately in the center of the vehicle, as low as possible on the cups to the bracket. front windshield without obstructing the unit’s view of the road either to the front or rear. You can also mount it directly on the dashboard. 2. Make sure the rubber cups and your windshield
Inhaltszusammenfassung zur Seite Nr. 5
Installation Getting Started And Settings Your Detector Your Detector Getting Started Dashboard Mounting • Power On 1. Place the detector on the dashboard to find a location Testing where the unit has a clear, level view of the road. The angle can NOT be adjusted after mounting. On-Off/ 2. Remove the paper backing System Ready Volume Control from one (1) side of the Rotate clockwise hook-and-loop fastener. (away from you) Voice Alert 3. Attach the pad to the dashboard at your chosen To Turn O
Inhaltszusammenfassung zur Seite Nr. 6
Settings Settings Your Detector Your Detector Highway/City Mode DigiView Data Display Brightness Setting your detector to City mode delays all X band audio alerts until You can choose from four (4) settings for Brightness of the display. the signal strength reaches Level 3. (A single beep will sound when the You can cycle through the settings by repeatedly pushing the Dim button. signal is first detected.) This will reduce false alerts while you are driving The factory setting is Bright. in, o
Inhaltszusammenfassung zur Seite Nr. 7
Settings Settings Your Detector Your Detector Muting An Alert IntelliMute Your detector allows you to quickly turn Off an audio Alert by momentarily IntelliMute is a unique new feature that allows you to avoid alerts you pressing the Mute button. If you press the Mute button a second time don’t need to hear because you are stopped or moving slowly. By sensing during the Alert, the audio Alert will be turned back On. the “revs” (RPMs) of your engine, IntelliMute knows when you are at low speed
Inhaltszusammenfassung zur Seite Nr. 8
Settings Settings Your Detector Your Detector Hold IntelliMute Button Rev Level Set What To Remember While Using IntelliMute IntelliMute works with both City and Auto Mute modes. Press Int... Intelli Whenever engine revs are below the activation point, an arrow pointing down will appear in the display. Above the activation point, an arrow pointing up will appear. button ag... Mute Below Activation Point Above Activation Point IntelliMute Button desired RPMs Set! Press and hold for ih ih two (
Inhaltszusammenfassung zur Seite Nr. 9
Settings Settings Your Detector Your Detector Voice/Tone Setting Spectre 1 And VG-2 Alert Audio Settings You can set your detector to sound alerts with either a Voice The detector is undetectable by police Spectre 1 and VG-2 radar detector or a Tone. You can change settings by using the Mute button. detectors and will alert you when such a device is in use near your vehicle. During the alert, the unit continues to detect other signals. You can choose In Voice Alert mode, you will first hear seve
Inhaltszusammenfassung zur Seite Nr. 10
Detection Detection Your Detector Your Detector Detection Radar Signals, Voice And Visual Displays • Type of Signal Voice Visual Display Signals Detected The tables on the following pages show you the types of Signals your detector X Band Radar X Alert X and Signal Strength will detect, as well as the voice and visual alerts it provides for each of them. K Band Radar K Alert K and Signal Strength Ka Band Radar Ka Alert Ka and Signal Strength Audio Alerts X Signal Detected K Signal Detected Ka Si
Inhaltszusammenfassung zur Seite Nr. 11
Detection Detection Your Detector Your Detector Instant-On Detection Safety Alert Signals, Voice And Visual Displays Your detector is designed to detect Instant-On speed monitoring signals, Type of Signal Voice Visual Display which can suddenly appear at full strength. Emergency Vehicles Emergency Vehicle Approaching Emergency Vehicle Road Hazards Road Hazard Ahead Road Hazard NOTE Trains Train Approaching Train You should take appropriate action immediately whenever an instant-on alert is give
Inhaltszusammenfassung zur Seite Nr. 12
Understanding Radar And Laser Understanding Radar And Laser Your Detector Your Detector Understanding Radar And Laser Strobe Alert • Special strobes mounted on the light bars of authorized emergency Radar Speed Monitoring Systems vehicles (fire trucks, police cars, ambulances) automatically change traffic Three (3) band frequencies have been approved by the Federal Communications signals as the vehicle approaches an intersection. These strobes and the Commission (FCC) for use by speed monitorin
Inhaltszusammenfassung zur Seite Nr. 13
Maintenance Specifications Your Detector Your Detector Maintenance Specifications • • Band And Frequencies Maintenance Of Your Radar Detector Band Frequencies Your detector is designed and built to give you years of trouble-free performance without the need for service. X Band 10.525 ± 0.050 GHz No routine Maintenance is required. K Band 24.125 ± 0.125 GHz If your unit does not appear to be operating properly, Safety Alert 24.070 ± 0.010 GHz please follow these troubleshooting steps: Traffic W
Inhaltszusammenfassung zur Seite Nr. 14
Product Service And Warranty Trademark Acknowledgement Warranty Customer Assistance Limited 1-Year Warranty Product Service • • If you have any questions about operation or installing your new For Products Purchased In The U.S.A. Cobra product, or if you are missing parts… Cobra Electronics Corporation warrants that its Cobra 11 Band Radar/Laser Detectors, and the component parts thereof, will be free of defects in Please call Cobra first! DO NOT RETURN THIS PRODUCT workmanship and materials f
Inhaltszusammenfassung zur Seite Nr. 15
Optional Accessories Order Form Customer Assistance Customer Assistance Optional Accessories Order Form • • You can find quality Cobra products and accessories at your local Cobra dealer, or in the U.S.A., you can Name order directly from Cobra. Address (No P.O. Boxes) City State/Province Zip Country Telephone Credit Card Number Type: ❒ Visa ❒ MasterCard ❒ Discover Exp. Date Customer Signature Windshield Mounting Bracket Straight 12V DC Power Cord Item # Description U.S. Cost Each
Inhaltszusammenfassung zur Seite Nr. 16
The Cobra line of quality products includes: CB Radios ® microTALK Radios Radar/Laser Detectors ® Safety Alert Traffic Warning Systems Accessories GPS (Global Positioning System) ® HighGear Accessories ™ CobraMarine VHF Radios Power Inverters For more information or to order any of our products, please visit our website: www.cobra.com ® Nothing comes close to a Cobra English
