Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
#1080 Snowblower TABLE OF CONTENTS DESCRIPTION PAGE Warranty......................................................................1 Safety Instructions & Safety Sign Locations ................2 Operating Instructions..................................................3 Assembly Instructions..................................................5 #1080 Farm King Snowblower
Inhaltszusammenfassung zur Seite Nr. 3
#1080 Snowblower WARRANTY POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months (90 days for commercial application) from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper applications. Buhler Manufacturing’s obligations under this warranty shall be limited to the
Inhaltszusammenfassung zur Seite Nr. 4
#1080 Snowblower SNOWBLOWERS This manual is for model #1080 snowblowers with a combination three point and quick coupler hitch. All model #1080 snowblowers use an open gear drive. The standard model is a push type, which will mount to a tractor with 1000 rpm PTO only. This model uses a chain drive reducer in the welded gearbox assembly, which runs in an oil bath. A direct drive 540 RPM model i
Inhaltszusammenfassung zur Seite Nr. 5
#1080 Snowblower OPERATING INSTRUCTIONS 1. Do not operate the blower in the fully raised position. The three-point hitch on some tractors raises high enough to cause the PTO shaft to bind. This can cause damage to the PTO shaft and/or to the hitch and pins. 2. Depth of the cut can be partially controlled by tilting the blower forward or backward. Adjust the top link of the tractor h
Inhaltszusammenfassung zur Seite Nr. 6
#1080 Snowblower OPERATING INSTRUCTIONS – cont’d. 10. Lubrication: a) The spout clamps and rings should be periodically lubricated with gun grease. This is particularly important on the truckloader spout which turns harder than the standard spout due to the length and weight. b) PTO shaft universal joints and splined slide should be greased daily. c) Regularly oiling th
Inhaltszusammenfassung zur Seite Nr. 7
#1080 Snowblower ASSEMBLY INSTRUCTIONS 1. Hitch Assembly: With lower hitch tubes (#3) turned as shown in drawing, slide them into the sleeves welded to the main body. These tubes are adjustable to two different positions. The correct position for each individual tractor will be determined when mounting the snowblower on the tractor (see Section 4). Start with the t
Inhaltszusammenfassung zur Seite Nr. 8
#1080 Snowblower ASSEMBLY INSTRUCTIONS - Cont'd. 4. Mounting blower on Tractor: a) Mount the blower on a tractor with a category 2 or 3 standard hitch or a category 3 quick hitch. The hitch has two holes both at the top of the hitch and at each lift arm. When using a quick coupler, the pins must be in the inside set of holes. Use the outside set of holes with a standard three- po
Inhaltszusammenfassung zur Seite Nr. 9
#1080 Snowblower #1080 SNOWBLOWER - 7 -
Inhaltszusammenfassung zur Seite Nr. 10
#1080 Snowblower - 8 -
Inhaltszusammenfassung zur Seite Nr. 11
#1080 Snowblower - 9 -
Inhaltszusammenfassung zur Seite Nr. 12
#1080 Snowblower WHEN ORDERING PARTS Always give your dealer the Model, Color, and Serial Number of your machine to assist him in ordering and obtaining the correct parts. Use the exploded view and tabular listing of the area of interest to exactly identify the required part. #1080 Snowblower Item # Part # Description 1 906491 Main Body Weldment 2 F9244 3-point Hitch Weldment (90212
Inhaltszusammenfassung zur Seite Nr. 13
#1080 Snowblower 36 81676 5/8'' Hex Nut (pl) 37 81549 5/16'' X 3/4'' Hex Bolt (pl) 38 81569 5/16'' Lock Washer (pl) 39 81568 5/16'' Hex Nut (pl) 40 965216 Auger (15'' O.D. X 107 3/8''Lg) 41 902902 4-Blade Fan Weldt 42 965294 Jack Stand Pin 43 F9231 Standard PTO (1 3/8'' X 21 spline) F9232 Optional PTO (1 3/4'' X 20 spline) F9233 540 RPM PTO (1 3/8'' X 6 spline) 44 965280 Drive Shaft 45 96
Inhaltszusammenfassung zur Seite Nr. 14
#1080 Snowblower 77 965305 Spout Link - 8 3/4'' 78 965238 Cylinder Arm 79 965239 Hose Clamp 80 81620 1/2'' X 1 1/4'' Hex Bolt (pl) 81 812364 1/2'' Lock Nut (pl) 82 965266 CAT. 2-3 Top Link Pin Bushing 83 965267 CAT. 2-3 Lift Arm Bushing 84 965268 Fan Housing Liner 85 967431 3/8'' X 1'' Flat Head Bolt (pl) 86 905609 5/8'' X 2 1/4'' Flat Head Bolt (pl) 87 810149 3/4'' X 3 1/2'' Hex Bolt (pl)
Inhaltszusammenfassung zur Seite Nr. 15
#1080 Snowblower 117 115371 3/8'' x 156'' Hose w/fittings 115369 3/8 x 156 Hose 1/2 MNPT x 9/16 SWFJIC 811918 Elbow 90deg 9/16 SWMORB x 9/16 MJIC 886786 Elbow 90deg 1/4'' MNPT x 9/16'' MJIC 118 902127 1/2'' x 1 3/4'' Gear Key (540 RPM) 119 936402 PTO Safety Chain 120 967433 5/8'' x 3 1/4'' Hex Bolt (pl) 121 812482 5/8'' Lock Nut (pl) 122 84277 1/2'' x 1 1/2'' Hex Bolt (pl) 123 967164 P
Inhaltszusammenfassung zur Seite Nr. 16
#1080 Snowblower #1080 SNOWBLOWER PTO - 14 -
Inhaltszusammenfassung zur Seite Nr. 17
#1080 Snowblower 108'' SNOWBLOWER PTO SHAFT PARTS LIST Item # Part # Description F9231 Standard Shaft (21 Spline, 1 3/8'') - 1000 RPM F9232 Optional Shaft (20 Spline, 1 3/4'') - 1000 RPM F9233 540 RPM Shaft (6 Spline, 1 3/8'') 1 936413 Standard Shear Assembly (21 Spl, 1 3/8'') 936422 Shear Hub Only (21 Spl, 1 3/8'') 936414 Optional Shear Assy (20 Spl, 1 3/4'') 936423 Shear Hub Only
Inhaltszusammenfassung zur Seite Nr. 18
#1080 Snowblower #1080 SNOWBLOWER BUNDLES QUANTITY BUNDLE NO. DESCRIPTION 1000 RPM WITH STANDARD SPOUT – Y1080C 1 F9244 Hitch 1 F9241 Standard Spout 1 F0198 Body Assembly 1 F0560 Deflector Cylinder & Hose Kit 1 F9231 PTO 1000 rpm (1 3/8” x 21 spline) 1000 RPM WITH TRUCKLOADER SPOUT – Y1080CT 1 F9244 Hitch 1 F9243 10’ Truckloader Spo
Inhaltszusammenfassung zur Seite Nr. 19
DIVISION LOCATIONS U.S. WAREHOUSES ND, Bismarck AR, West Memphis Farm King Division (701) 223-1886 (870) 732-3132 301 Mountain Street S. Morden, MB R6M 1X7 ND, Fargo GA, Stone Mountain (701) 282-7003 Ph.: (204) 822-4467 (770) 908-9439 Fax: (204) 822-6348 NY, Syracuse IA, Lakeview (315) 463-5276 (712) 657-8585 Allied Division OH, Youngstown 1201 Regent Ave. W. ID, Meridian (330) 793-0862 (208) 887-6006 Box 1003 Winnipeg, MB R2C 3B2 OR, Portland I
