Bedienungsanleitung Timex 753424T

Inhaltszusammenfassung zur Seite Nr. 1

Atomic Digital Clock
with indoor/outdoor temperature,
calendar and moon phase
MODEL # 75324T
USER GUIDE
Package Contents:
(1) Atomic Digital Clock
(1) Wireless Outdoor
Temperature Sensor
(1) User Guide
What You’ll Need:
NOTE: A clear protective film is applied to the LCD at the
factory that must be removed prior to using this product.
(8) AA Batteries
Locate the clear tab and simply peel to remove.
®
Thank you for purchasing this quality TIMEX brand product. Please read these instructi

Inhaltszusammenfassung zur Seite Nr. 2

Product Specifications BASIC SETUP Indoor Temp. Range = 32°F to 140°F (0°C to 60°C) 1. Battery Installation - BEGIN WITH THE OUTDOOR WIRELESS SENSOR Outdoor Temp. Range = -40°F to 158°F (-40°C to 70°C) Atomic Clock Frequency = WWVB 60Khz Remove 1 433Mhz - Radio Signal batteRy install 2 “aa” 2 compaRtment batteRies Synchronizes daily coveR 100' (30m) Radio Frequency Transmission Range Power Requirements = (8) "AA" Alkaline Batteries BATTERY SAFETY: Clean the battery conta

Inhaltszusammenfassung zur Seite Nr. 3

TROUBLESHOOTING 3. Choosing Your Time Zone 1. Press and HOLD the SET button until you see the selection of seven time zones flashing on the LCD screen PROBLEM POSSIBLE SOLUTIONS 2. Press the UP ( s) ARROW repeatedly until you reach your time zone, then press SET Poor Atomic Clock Relocate or reposition the clock, making sure the backside of the unit is facing in a direction Reception HAST AKST PST MST CST EST AST hawaii aleutian alaska standard pacific standard mountain standard central standa

Inhaltszusammenfassung zur Seite Nr. 4

Placement of the Clock: SETTING THE CLOCK MANUALLY Place the clock in an area free of dirt and dust. To help ensure an accurate Up indoor temperature measurement, be sure to place the main unit out of  Arrow SET direct sunlight, and away from any heat sources or vents in your home.  SET Down This clock may be hung on a wall using the integrated wall-hanging hole, Arrow or you may place the unit on a tabletop or other flat surface using the “Set” to confirm swing-out stands. manual set