Inhaltszusammenfassung zur Seite Nr. 1
00992 INST06-06-08
Instruction Manual
Please DO NOT return product to the retail store.
For technical assistance and product return information, please call
Mon. - Fri. 8:00 A.M. to 4:45 P.M. (CST)
Customer Care: 877-221-1252
Professional WIreless Weather Station
www.chaneyinstrument.com
With Wind Sensor & Atomic Clock
LIMITED ONE YEAR WARRANTY
Chaney Instrument Company warrants that all products it manufactures to be of good material and workmanship and to be free of MODEL # 00992
defect
Inhaltszusammenfassung zur Seite Nr. 2
WIRELESS THERMO-HYGROMETER ATOMIC CLOCK SENSOR: The ACURITE® professional wireless weather station comes complete with the following items: The thermo-hygrometer atomic clock sensor measures the outdoor temperature and relative humidity. It also includes the radio controlled atomic clock transmitter, which receives data 1. Main unit with foot stand for desktop use Exit from the atomic clock in Fort Collins, Colorado, and then sends the received data back to the 2. Wireless Thermo-Hygrometer &
Inhaltszusammenfassung zur Seite Nr. 3
MOUNTING THE WIRELESS WIND SPEED BATTERIES (not included) AND WIND DIRECTION SENSOR: NOTE: Do not install batteries in any of the units until you have read through the initial set-up Before permanently mounting the steps in their entirety. wind speed bracket, make sure that the wind-fan and wind-vane can rotate BATTERY TYPE: freely without any disruption. Also INDOOR UNIT: “AA” (3) alkaline type batteries can be used for the indoor unit. note that the wind speed sensor WIRELESS OUTDOOR UN
Inhaltszusammenfassung zur Seite Nr. 4
INITIAL SET-UP GENERAL SET-UP IMPORTANT: The general setting mode allows the user to change several product default settings, which is For initial set-up, you will need to have the altitude at which the unit will be operating at ready to done by simply accessing one setting after the other by pressing the “PRESSURE SET-UP” enter. This step cannot be skipped or returned to during the initial set-up. Visit button. In normal mode, press and hold the “PRESSURE SET-UP” button for 3 seconds to enter
Inhaltszusammenfassung zur Seite Nr. 5
Wind Speed Average: The wind speed average is calculated by averaging the wind speed over a GENERAL WEATHER STATION FUNCTIONS period of time. After the initial and general set-up, the following data will be displayed in different sections on the main unit display. WEATHER AND TIME ALARMS MOON PHASE: The moon phase indicator, found under the date display, shows the current phase of the moon ALARM SETTING MODE: The alarm setting mode allows the user to change several alarm based on the yearly
Inhaltszusammenfassung zur Seite Nr. 6
TO ACCESS THE MIN OR MAX VALUES (CONTINUED): TO ACCESS THE LONG-TERM RECORDS: When pressing the “MAX” button, the unit will show the maximum value for all the records in While in either the “MIN” or “MAX” mode, press the “RECORD” button to show the long-term the upper display window. Values in the upper display window are as follows; Outdoor tempera- record highs or lows of the weather station. These values may have occurred anytime in the ture, outdoor humidity, indoor temperature, indoor hu
Inhaltszusammenfassung zur Seite Nr. 7
WIRELESS SENSOR BATTERY REPLACEMENT: REFERENCE When the low battery indicator icon becomes present, it is recommended that you change the batteries. Replace only with the same or equivalent type of fresh alkaline batteries. This BUTTON OPERATION DESCRIPTIONS: method of battery replacement ensures there will be no loss in MIN/MAX and history data. The main unit has 8 buttons for user operation. Please refer to the following for button However, if main unit or sensors have remained without ba
Inhaltszusammenfassung zur Seite Nr. 8
Inhaltszusammenfassung zur Seite Nr. 9
REFERENCE: FACTORY DEFAULT SETTINGS MODEL# 00594W Do not return product to retail store. For Technical Assistance and product return information, please contact Customer Care at: 877-221-1252 HOURS: Monday through Friday from 8:00 a.m. to 4:45 pm CST.
