Inhaltszusammenfassung zur Seite Nr. 1
INFORMATION ONLY – DOES NOT COMMUNICATE
IINFORMATION ONLY – DOES NOT COMMUNICATE
NFORMATION ONLY – DOES NOT COMMUNICATE
A MODIFICATION OR SAFETY CONDITION
A MODIFICATION OR SAFETY CONDITION
A MODIFICATION OR SAFETY CONDITION
4287A-03
S E R V I C E N O T E
Supersedes:
NONE
4287A RF LCR Meter
Serial Numbers: JP1KGxxxxx, JP2KGxxxxx, MY432xxxxx
HDD repair procedure is changed
Parts Required:
P
Inhaltszusammenfassung zur Seite Nr. 2
Page 2 of 14 4287A-03 Situation: The new HDD (04287-65000) for repair does not include any operating system. When the HDD (04287-65000) is used, the operating system for 4287A should be installed. Solution/Action: The new HDD repair procedure for the 4287A is as follows. Required Equipment OS Image: CD disk (Operating system for 4287A, F/w rev.1.31, Agilent service office use only) HDD: p/n 04287-65000 (It is available for 4287A(win98), E4991A(win98), E5070/71A) Software : Symant
Inhaltszusammenfassung zur Seite Nr. 3
Page 3 of 14 4287A-03 1. Make Boot disks using Symantec Ghost (Required for the first time) 1) Click Start – Programs – Symantec Ghost – Ghost Boot Wizard. 2) Select Network Boot Disk and press the Next button. 3) If HP Ethernet with LAN remote power adapter is installed in the 4287A, select AMD PCNET Family and press the Next button. If 3Com EtherLink is installed in the 4287A, select 3COM 3c90x and press the Next button.
Inhaltszusammenfassung zur Seite Nr. 4
Page 4 of 14 4287A-03 4) Press the Next button 5) Press the Next button. 6) Press the Next button.
Inhaltszusammenfassung zur Seite Nr. 5
Page 5 of 14 4287A-03 7) Select The IP setting ….., and enter IP address 192.168.0.1 and subnet mask 255.255.255.0. Press the Next button. 8) Insert a floppy disk into your PC’s FDD, and the Next button. 9) Press the Next button. In case of selecting AMD PCNET Family:
Inhaltszusammenfassung zur Seite Nr. 6
Page 6 of 14 4287A-03 In case of selecting 3COM 3c90x: 10) Press the OK button.. 11) Press the Start button. 12) Press the OK button. 13) Press the OK button.
Inhaltszusammenfassung zur Seite Nr. 7
Page 7 of 14 4287A-03 14) Press the Close button. 15) Copying File. 16) Insert the second disk into your PC’s FDD, and press OK button.. 17) Press the Start button. 18) Press the OK button.
Inhaltszusammenfassung zur Seite Nr. 8
Page 8 of 14 4287A-03 19) Press the OK button. 20) Press the Close button. 21) Copying File. 22) Press the Finish button.
Inhaltszusammenfassung zur Seite Nr. 9
Page 9 of 14 4287A-03 2. Replace the defective HDD with the new HDD(p/n 04287-65000) 1) Replace the defective HDD with the new HDD (p/n 04287-65000). Refer to “A27 Mass Storage Disk Drive Replacement” of the 4287A service manual. 3. Connect the 4287A to your PC installed Symantec Ghost directly 1) Connect the 4287A to your PC installed Symantec Ghost directly using a crossed LAN cable (or two straight LAN cables and a Hab for LAN). 4. Set up your PC’s IP address and s
Inhaltszusammenfassung zur Seite Nr. 10
Page 10 of 14 4287A-03 4) Select TCP/IP and press the Properties button. 5) Select Use the following IP address, and then enter the IP address 192.168.0.2 and subnet mask 255.255.255.0. Press the OK button. 6) Restart your PC.
Inhaltszusammenfassung zur Seite Nr. 11
Page 11 of 14 4287A-03 5. Set up GhostCastServer 1) Insert the CD disk (Operating System for 4287A) into your PC’s CD drive (or an external CD drive). Then, copy the image file of the CD disk onto your PC’s HDD (C drive) as a temporary image file. 2) Click Start – Programs – Symantec Ghost – GhostCastServer. 3) Click the Browse button. 4) If Insert disk dialog box is displayed, click the Cancel button. 5) Select the temporary image file you copied, and press the Ope
Inhaltszusammenfassung zur Seite Nr. 12
Page 12 of 14 4287A-03 6) Enter session name kobe and client count 1. Then select Restore Image and Disk 7) Click the Accept Client. Then, a message of “Waiting for client to connect…” is displayed.
Inhaltszusammenfassung zur Seite Nr. 13
Page 13 of 14 4287A-03 6. Copy the image file onto the 4287A’s HDD 1) Connect the external keyboard and mouse to the connectors on the 4287A rear panel. st 2) Insert the ghost boot disk (1 disk) into the FDD of the 4287A. 3) Turn the instrument on. 4) PC DOS 7.1 Startup Menu is displayed. Then, select 1 and press Enter key. 5) Confirm that there are no error messages on the display. 6) A message of “Insert Ghost boot disk 2 (containing Ghost.exe). Press any key to continue..” is disp
Inhaltszusammenfassung zur Seite Nr. 14
Page 14 of 14 4287A-03 7. Perform initial setting for 4287A 1) Disconnect the LAN cable from the 4287A. 2) Turn the 4287A on. 3) System Setting Change Dialog Box is displayed. Then, click the No button. 4) Double-click the NetConf icon. 5) Network adapter window is displayed. Then, click the OK button. 6) Success window is displayed. Then, click the OK button. 7) Double-click the CheckNetConf icon. 8) Network adapter window is displayed. Then, click the OK button. 9) Success window i
