Inhaltszusammenfassung zur Seite Nr. 1
WHYNTER SNO Portable Ice Maker – Stainless Steel Series
MODEL# : T-2M/A / T-2C/A
Instruction Manual
Thank you for your purchase of this WHYNTER product. Please read this Instruction Manual carefully before
using product to ensure proper use. Keep this manual in a safe place for future reference.
Inhaltszusammenfassung zur Seite Nr. 2
Introduction This instruction manual covers the operation of the Whynter portable ice maker models T- 2M/T-2MA and T-2C/T-2CA. Both models provide the same functionality, the difference being cosmetic. Model T2-M has a brushed/stainless steel finish and model T-2C has a shiny/bright chrome finish. The “A” designation refers the units equipped with the optional functionality of the “Direct Water Supply” mode. Please read these instructions carefully and retain them for reference.
Inhaltszusammenfassung zur Seite Nr. 3
E D A B H I C F G K J
Inhaltszusammenfassung zur Seite Nr. 4
Referencing images on Page 3 A Ice Cube Drawer B Water Tank C Water Level Indicator D Function Display E Cover with Window F On/Off Switch G Mains Water Input H Mains Water Control Float I Water Tank Removable Lid J Mains Lead K Mains Lead Socket Detail of Function Display:
Inhaltszusammenfassung zur Seite Nr. 5
Appliance Safety Your safety and the safety of others are very important to us. To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do not use an extension cord. Do not use if the power supply cord is damaged. If damaged, it must be replaced by a qualified electrician. It is recommended that a separate circuit, s
Inhaltszusammenfassung zur Seite Nr. 6
Preparing the Appliance for Use Unpack the appliance and place it on a sturdy level surface. It is recommended that the packaging is retained for secure movement or transport. The appliance operates at its optimum performance in a normal room temperature of o o 68 F/20 C. The refrigerant inside the appliance must have time to settle following transportation and a minimum stabilization period of three hours is recommended prior to switching on the appliance. There are two vent
Inhaltszusammenfassung zur Seite Nr. 7
Appliance Operation Plug the appliance mains electricity lead into a suitable supply and switch on the ON/OFF switch situated on the rear of the appliance. The ON/OFF switch is illuminated and will light up. The appliance should be positioned for easy access to the ON/OFF switch and mains plug to facilitate rapid switch off and appliance isolation when required. For the T-2MA / T-2CA models Direct Water Supply mode. Please i) connect a hose to the water mains and to the unit, ii) tu
Inhaltszusammenfassung zur Seite Nr. 8
Appliance Operation (Continued) deposited into the Ice Drawer recess rather than the Ice Drawer itself. If the appliance does beep continuously ensure the Ice Cube Drawer is fully in its recess. The appliance will continue to produce ice cubes at approximately 12 minute intervals. Some variation in ice cube size should be expected on initial switch on however variation should be minimized once the appliance has stabilized. Other variables such as water temperature and ambient operati
Inhaltszusammenfassung zur Seite Nr. 9
After Use When the appliance is not to be used for some time, for example for periods exceeding 48 hours, it is recommended that it be disconnected from the electrical supply and any remaining ice cubes and water be removed. Excess water in the Ice Cube Drawer, the Water Tank and water tray should be removed using kitchen towels or similar absorbent material. It is also recommended that the appliance is cleaned on a regular basis, perhaps once every three months or more frequently i
Inhaltszusammenfassung zur Seite Nr. 10
Hints and Tips Do not place the appliance on its side or upside down. Pay particular attention to this when the appliance is being moved or transported. Ventilation grilles must not be obstructed. Do not immerse the appliance in water or other liquids. The appliance has internal moving parts. Do not open the Window whilst it is connected to the electricity supply and take particular care to prevent children from getting access to or playing with the appliance. The ice making
Inhaltszusammenfassung zur Seite Nr. 11
Problems and Malfunctions If the indicator light on WATERTANK is illuminated red the water tank level is low and requires topping up. If the L and START indicator lights flash and the appliance beeps then the Ice Cube Drawer is not positioned correctly and should be removed and replaced firmly into its recess. There are a number of sensors associated with the Ice Cube Drawer and the Water Tank and faulty positioning of these units is the most common cause of malfunction. Always ens
Inhaltszusammenfassung zur Seite Nr. 12
Appliance Technical Data Voltage and Frequency: 110V AC 60Hz Maximum Power: 200W Water Tank Capacity: 4.5 liters (1.02 gallons) approximately Ice Cube Cycle Time: S (Small) ≈ 12 minutes M (Medium) ≈15 minutes L (Large) ≈ 18 minutes Dimensions: 360 x 390 x 440 (mm) 14.2 x 15.4 x 17.4 (inch) Net weight: 19.5Kg / 43 Lbs The number of ice cubes produced per cycle is 12. The Ice Cube Drawer holds approximately 60 cubes or 1 Kg of ice. The appliance produce
Inhaltszusammenfassung zur Seite Nr. 13
ONE YEAR LIMITED WARRANTY This WHYNTER ice maker is warranted, to the original owner within the 48 continental states, for one year from the date of purchase against defects in material and workmanship under normal use and service. Should your WHYNTER ice maker prove defective within one year from the date of purchase, return the defective part or unit, freight prepaid (within two months of purchase; after two months to one year, customer will be responsible for freight cost to Whynter’s
