Inhaltszusammenfassung zur Seite Nr. 1
AUDIOVOX
CDM-9000
Tri-Mode CDMA/AMPS
Handheld Portable
Cellular Telephone
In today’s fast paced world, it has become a necessity to have access to real-time information. Your communications tools
must provide you with this access from anywhere and anytime. With that in mind, Audiovox developed the CDM-9000,
our first Tri-Mode Web Browsing wireless telephone.
The CDM-9000 features 800 MHz Amps/CDMA and 1900 MHz CDMA Tri-mode operation for enhanced nationwide
service coverage. The digital phone fe
Inhaltszusammenfassung zur Seite Nr. 2
WRIST STRAP ATTACHMENT Attach the wrist strap to the phone through the strap hole as shown below 1. Then pull the long loop through the smaller loop as shown below 2. BATTERY INSTALLATION AND RECHARGING To Attach the Battery Pack 1. Insert the hook at the end of the Battery Pack into the slot at the end of the phone. 2. Press the Battery Pack down to lock the Battery Pack onto the phone. To Detach the Battery Pack 1. Slide back the Release Latch as shown below. 2. Lift up to remove the Battery
Inhaltszusammenfassung zur Seite Nr. 3
TO RECHARGE BA TTERY Your CDM-9000 has a built in charger function. To re-charge the Battery Pack, always install the Battery Pack to the phone. 1. Attach the Battery pack to the Phone 2. Insert the DC plug of the AC Adapter (CNR-4000) to the Desktop Holder (DTH-4000). Plug the AC Adapter to AC outlet. 3. Place the Phone with Battery Pack into the Desktop Holder. 4. Then the recharging starts. The display indicates “Now Charging” with animation. You can see a battery level indicator scrolling at
Inhaltszusammenfassung zur Seite Nr. 4
FUNCTIONS External View
Inhaltszusammenfassung zur Seite Nr. 5
BASIC OPERATION Placing Calls To place a call: 1. Enter the phone number.( a maximum of 32 digits will be displayed.) 2. Press . The indicator will light. · To Correct a Number Press to clear the last digit. Press and hold to erase all the digits entered. · If the Call Fails to Go Through Press , and to redial the number. GETTING ST ARTED Turning the phone On/Off Press and hold . All the indicators and the digit display will light momentarily, and a tone will be heard. The indicator wil
Inhaltszusammenfassung zur Seite Nr. 6
+ Power Management Talk Time Standby Battery Mode (up to) Time (up to) Slim Battery D. igital1h 90 min 170 (BTR-4000) Slim Battery A. nalog6h 5 min 12 (BTR-4000) Extended D. igital3h 80 min 340 (BTE-4000) Extended A. nalog1h 30 min 24 (BTE-4000) BASIC OPERATION Placing Calls To place a call: 1. Enter the phone number.( a maximum of 32 digits will be displayed.) 2. Press . The indicator will light. To Terminate a Call Press . The indicator will go out. Last Number Redial Press to recall
Inhaltszusammenfassung zur Seite Nr. 7
See Phonebook Recall. To Mute A Phone Conversation Press to mute your conversation at any time during a call. “MUTE” will be displayed. To return to normal conversation, Press again. Speed Dialing If you know the phonebook address of the telephone number that you want to call, you may place a call without using . 1. Enter the one or two digits of your phonebook address (1~9 or 10~99). 2. Press . The phone number will be displayed. The indicator will light, and the call will be placed. NOTE:
Inhaltszusammenfassung zur Seite Nr. 8
mode, the phone will attempt to complete the emergency call using any available cellular system from which it can obtain service. After it places an emergency call, the phone will stay in the Emergency Call Mode, and will display Emergency Call Mode, END to exit”. In the Emergency Call Mode, the phone will attempt to continue to receive service from the cellular system that it used to complete the call. The phone will automatically exit the Emergency Call Mode after 5 minutes or after you press
Inhaltszusammenfassung zur Seite Nr. 9
Simply press the or to adjust Earpiece Volume during a call. Scratch Pad Dialing If you enter a telephone number during a call, the number will be stored in the Scratch Pad memory. After terminating the call, the number you entered can be dialed by . NOTE: You can deactivate “ Sending DTMF” so that keypad tones will not be transmitted to the calling party. See Sending DTMF (F35). Automatic Talk Timer The talk time of the current call will be automatically displayed. For example, “1h23m45s”.
Inhaltszusammenfassung zur Seite Nr. 10
Inhaltszusammenfassung zur Seite Nr. 11
Inhaltszusammenfassung zur Seite Nr. 12
Inhaltszusammenfassung zur Seite Nr. 13
Inhaltszusammenfassung zur Seite Nr. 14
Inhaltszusammenfassung zur Seite Nr. 15
Inhaltszusammenfassung zur Seite Nr. 16
Inhaltszusammenfassung zur Seite Nr. 17
Inhaltszusammenfassung zur Seite Nr. 18
Inhaltszusammenfassung zur Seite Nr. 19
Inhaltszusammenfassung zur Seite Nr. 20
