Inhaltszusammenfassung zur Seite Nr. 1
EXI5660
Series
Inhaltszusammenfassung zur Seite Nr. 2
Setup Guide Step 3 Set up the Base Step 5 Connect to the Phone Line Additional Features EXI5660 Formore information onthese Plug the AC adapter cord to Plug one end of the and other features,please refer to Step 1 Check the Package Contents the DC IN 9V jack (yellow). telephone cord into yourOwner ’s Manual.For your the base TEL LINE Make sure your cordless phone’s convenience, listed below are jack. packaging includes the following important features that will he
Inhaltszusammenfassung zur Seite Nr. 3
Guía de programación 3° Paso Preparación de la base 5° Paso Conexión de la línea telefónica Características adicionales EXI5660 Conecte un Paramás información sobre estas y otras Conecte el adaptador CA extremo de la características, lerogamos que consulte su 1° Paso Inspección del contenido del embalaje en el enchufe (amarillo) DC línea telefónica en Manual del usuario. Parasu conveniencia, hemos IN 9V. Asegúrese de que haya recibido los el enchufe TEL listado abajo unas
Inhaltszusammenfassung zur Seite Nr. 4
Contents Using Call Waiting ............................................................. 26 Setup Guide ...................................................................1 Selecting a Different Channel ........................................... 26 Welcome/Accessibility ..................................................4 Find Handset .................................................................... 26 Terminology/Manual Conventions ...............................5 Tone Dialing Switch-over .
Inhaltszusammenfassung zur Seite Nr. 5
Welcome Congratulations on your purchase of the Uniden cordless telephone. This cordless phone is designed for reliability, long life, and outstanding performance. Note: Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ from the actual unit. The color of your cordless telephone may vary. ® Uniden is a registered trademark of Uniden America Corporation. AutoTalk, AutoStandby and UltraClear Plus are trademarks of Uniden America Corporati
Inhaltszusammenfassung zur Seite Nr. 6
Terminology Base The main part of the phone that connects to your phone line and lets you make and receive calls. Caller ID is available from your telephone provider. With this service, you can see the name and number CID of incoming callers. Caller ID on Call Waiting is available from your telephone provider. With this service, you can see CIDCW incoming caller information while on another call. Handset A cordless handset that can be placed anywhere in your home or office where AC power is av
Inhaltszusammenfassung zur Seite Nr. 7
Product Overview Main Phone Features • 5.8 GHz Extended Range Technology • Tone/Pulse Dialing • Caller ID/Caller ID on Call Waiting • Page/Find Handset Key • -Line Backlit LCD • Earpiece/Ringer Volume Controls • Trilingual Menu Displays (English, Spanish, or French) • Mute or Turn Ringer Off • 0 Caller ID Memory • Hearing Aid Compatible • 0 Number Memory Dialing • 20-Channel Auto Scan • Last Number Redial • Desk or Wall Mountable 6
Inhaltszusammenfassung zur Seite Nr. 8
Controls and Functions Handset . Handset antenna 2. Belt clip hole 1 1 . Jack for optional handset 4. Handset ringer speaker 5. Handset battery compartment 6 6 6. Handset earpiece 7. LCD display 2 2 8. [ ] and [ ] (volume & ringer up/down) keys 7 7 9. [cid/menu] key 0. [ /tone/ ] (left cursor) key 8 8 3 3 13 13 . [redial/pause] key 4 4 2. [select] key 14 14 9 9 . [talk/flash] key 4. [end] key 5. [#/ ] (right cursor) key 5 5 6. [mem] (memory) key 10 10 15 15 7. [delete/channel] key
Inhaltszusammenfassung zur Seite Nr. 9
Main Base Unit 20. charge/in use LED / Voice mail waiting indicator (flashing) 2. Base antenna 22. Base charging contacts 2. [find hs] key 24. Base DC IN 9V jack 25. TEL LINE jack 21 20 24 25 22 23 8
Inhaltszusammenfassung zur Seite Nr. 10
Installing the Phone Choosing the Best Location Before choosing a location for your new phone, here are some important guidelines you should consider: A Avoid heat sources, such as radiators, void heat sources, such as radiators, A Avoid noise sources such as a window by void noise sources such as a window by air ducts, and sunlight air ducts, and sunlight a street with heavy traffic a street with heavy traffic A Avoid television sets and other void television sets and other A Avoid microwave ov
Inhaltszusammenfassung zur Seite Nr. 11
Installing the Rechargeable Battery Pack into the Handset The handset is powered by a rechargeable battery pack. Once installed, the battery charges automatically when the handset is placed in the base unit. To install the rechargeable battery pack: 1) Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove. 2) Plug the battery pack connector (red & black wires) into the small jack inside the battery compartment. (The
Inhaltszusammenfassung zur Seite Nr. 12
Installing the Base Unit ) Connect the AC adapter to the DC IN 9V jack and to the standard 20V AC wall outlet. Note: • Use only the supplied AD-0001 AC adapter. Do not use any other AC adapter. • Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or electrical hazard. 2) Charge the handset by placing in the base unit with the keypad facing forward.
Inhaltszusammenfassung zur Seite Nr. 13
) Make sure that the charge/in use LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and that the handset makes good contact with the base's charging contacts. Note: • Connect the AC adapter to a continuous power supply (not controlled by a wall switch). • Place the base unit close to the AC outlet to avoid long extension cords. • Charge your handset at least 15 - 20 hours before plugging into the phone line. 4) Once the handset battery pac
Inhaltszusammenfassung zur Seite Nr. 14
Mounting the Base Unit on a Wall Standard wall plate mounting 1 1 This phone can be mounted on any standard wall plate. 3 3 ) Plug the AC adapter to the DC IN 9V jack. 2) Plug the AC adapter into a standard 20V AC wall outlet. 5 5 ) Plug the telephone line cord into the TEL LINE jack. 4) Plug the telephone line cord into the telephone outlet. 4 4 5) Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone is firmly seated. 5 5 2 2 Direc
Inhaltszusammenfassung zur Seite Nr. 15
• Make sure the wall material is capable of supporting the weight of the base and handset. • Use #0 screws (minimum length of - /8 inches) with anchoring devices suitable for the wall material where the base unit will be placed. ) Insert two mounting screws into the wall (with their appropriate anchoring device), -5/6 inches apart. Allow about /8 of an inch between the wall and screw heads for mounting the phone. 2) Refer to steps through 5 on page to mount the telephone. Insta
Inhaltszusammenfassung zur Seite Nr. 16
Basic Setup There are five basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code, Dial Mode and Language. Activating AutoTalk AutoTalk will allow you to answer the phone simply by removing the handset from the base. You do not have to press a key to answer the incoming call. To activate: ) When the phone is in standby, press and hold [cid/menu]. The following screen appears. 2) Press [select] to turn AutoTalk on. ) Press [end] or return the hand
Inhaltszusammenfassung zur Seite Nr. 17
2) Press [ ] to move the pointer to select CIDCW. ) Press [select] to toggle and turn on Caller ID on Call Waiting. 4) Press [end] and return the handset to the base unit to complete the setting. The handset returns to standby. Note: To enable the setting change of CIDCW, you need to return the handset to the base unit when you complete the setting. Programming Your Area Code In some areas the telephone company may allow you to place a local call by dialing only 7 digits (instead of 0). If
Inhaltszusammenfassung zur Seite Nr. 18
Choosing the Dialing Mode Your phone can communicate with the telephone network in two different ways: tone dialing and pulse dialing. These days, most telephone networks use a method called tone dialing, so your phone comes programmed for tone dialing by default. If your phone company uses pulse dialing, you'll need to change your phone's dial mode. There's an easy way to tell: try making a call. If your call connects, your phone's setting is fine. If not, you may need to change the dial mod
Inhaltszusammenfassung zur Seite Nr. 19
Setting the Language You can change the language the handset menu displays. Choose from English, French, or Spanish. To change the language setting: ) When the phone is in standby, Press and hold [cid/menu]. The following screen appears. 2) Press [ ] to move the pointer to select LANGUAGE. ) Press [select] to select ENG, FR. or ESP. 4) Press [end] or return the handset to the base unit to complete the setting. The handset returns to standby. 8
Inhaltszusammenfassung zur Seite Nr. 20
Using the Speed Dial Memory Your cordless phone allows you to store up to 0 names and numbers in the handset. You can dial these numbers with just a few key presses. The speed dial memory is not limited to phone numbers. You can store any number (up to 20 digits) that you need to enter once your call connects. This is referred to as Chain Dialing. An example is a frequently refilled prescription number. Store your pharmacy phone number in one speed dial and your most frequently refilled pre
