Inhaltszusammenfassung zur Seite Nr. 1
Instructions for Installation and Use
7kg Washing Machine
Ultima LCD
To the Installer:
Before installation, fill in the product details on the back cover of this
book. The information can be found on the rating plate.
To the User:
You must read these instructions prior to installing and using the
appliance and then retain them for future reference.
Inhaltszusammenfassung zur Seite Nr. 2
Description GB Dispenser drawer Control panel ( Varies by Model) Please record the Model number and Serial number of your machine on the back cover of this book for future reference. - The Serial number can be found on the inside door trim. Interlocking door and release lever. Cold water inlet point and attached fill hose (blue connector) Drainage hose Mains cable Front adjustable feet Hooked end support Plumbing indicator line TWO transit fixings. Comprising of: two bolts, two washers,
Inhaltszusammenfassung zur Seite Nr. 3
Programmes Something Control Panel and Option Detergents Care and Precautions Wrong? - Contents Installation Features Modifiers and Laundry Maintenance and Advice Troubleshooting Service Description Contents WASHING MACHINE GB Description, 2 Installation, 4-7 Unpacking Remove the transit fixings Location Levelling Water connection Drainage connection Electrical connection Before you start using your machine Control Panel Features, 8 Programmes and Option Modifiers, 9-13 Starting a programme Prog
Inhaltszusammenfassung zur Seite Nr. 4
Installation 5. Remove the ! Read these instructions carefully: the following GB polystyrene base. pages contain important information on installation and suggestions on how the appliance works. Unpacking 1. Using scissors, cut carefully along one corner post to remove the film. ! This is a part of the polystyrene base and should have stayed intact when you removed the base. ! If it has broken off and is still in the machine... 2. Open the door and check ! IMPORTANT check remove it... while
Inhaltszusammenfassung zur Seite Nr. 5
Programmes Something Control Panel and Option Detergents Care and Precautions Wrong? - Description Contents Installation Features Modifiers and Laundry Maintenance and Advice Troubleshooting Service Installation 3. Hold, slide sideways and pull to Remove the transit fixings GB remove. IMPORTANT: Follow these instructions to remove the TWO transit fixings (see Description for location). ! Situated one either side of the rear panel, BOTH transit bolts 4. For safety, insert one of the MUST be remo
Inhaltszusammenfassung zur Seite Nr. 6
Installation 1. Screw the cold water fill hose (blue connector) onto Levelling GB the cold water supply until tight. 2. Turn on the cold water supply and check for leaks, Your machine will be noisy if the two front feet are not tighten if necessary. adjusted so that the machine stands firm and level. ! The machine must be levelled from side to side and 3 ! We recommend fitting a /4" sealing cap from front to back. to the hot water supply tap (if present), to ensure there are no leaks. Sealing c
Inhaltszusammenfassung zur Seite Nr. 7
Programmes Something Control Panel and Option Detergents Care and Precautions Wrong? - Description Contents Installation Features Modifiers and Laundry Maintenance and Advice Troubleshooting Service Installation Drainage Connection Electrical connections GB Before plugging the appliance into the mains socket, ! Although you may need to move the hooked end make sure that: support along the grey drainage hose, DO NOT the socket is earthed and in compliance with the remove it. applicable law.
Inhaltszusammenfassung zur Seite Nr. 8
Control Panel Features Ultima GB ON/OFF ON/OFF Pause Status indicator light button lights LCD display Option START/CANCEL Detergent dispenser buttons button drawer Programme selector buttons Ultima control panel features Option buttons: To select the options available (see Programme Table and Option Modifiers). LCD display: Shows all information relating to your programme selections: wash temperature and spin speed, chosen options, along with time remaining. It will also indicate if the door
Inhaltszusammenfassung zur Seite Nr. 9
Programmes Something Control Panel and Option Detergents Care and Precautions Wrong? - Description Contents Installation Features Modifiers and Laundry Maintenance and Advice Troubleshooting Service Starting a Programme 8. In addition to showing you all Starting a typical wash programme GB information relating to your programme selections, the LCD 1. Switch the machine on by display will show you the stage pressing the ON/OFF Pause of a programme in progress, the button. time remaining until th
Inhaltszusammenfassung zur Seite Nr. 10
Programme Table Programme Table *Programme setting for test in accordance with IEC 60456 and EN 60456 GB 10 Label Programme Programme Type / Fabric Description Temp Max Approximate Required Soil Level Spin Available Recommended Selector (˚C) Load Programme Additional Speed Options Detergent Button (kg) Time (h : min) Option A P THREE Hygienic For hard wearing heat resistant cotton and linen. 95 7 2 : 30 - Normal Max Pre Wash, Rinse Hold, Mini Load, Ariel Bio Powder / TIMES White Cotton Extra Rin
Inhaltszusammenfassung zur Seite Nr. 11
Programmes Something Control Panel and Option Care and Precautions Wrong? - Description Contents Installation Features Modifiers Detergents Maintenance and Advice Troubleshooting Service Option Modifiers and Special Features Special features GB ! Not all special features can be used on all programmes - (see Programme Table for option availability). Fast Wash: The Fast Wash programmes are designed for lightly soiled loads delivering quick results for smaller loads, using less energy. For loads
Inhaltszusammenfassung zur Seite Nr. 12
Option Modifiers and Special Features Option modifiers GB ! Not all options can be used on all programmes - (see Programme Table for option availability). Wash Enhance: Use this option to select a more intensive wash programme for the cotton 60˚C and cotton 40˚C for more heavily soiled items. Additionally, use this option on the machine wash wool programme to select the special Handwash wool programme for wool items that are not marked as machine washable. This cycle has been approved by Wo
Inhaltszusammenfassung zur Seite Nr. 13
Programmes Something Control Panel and Option Detergents Care and Precautions Wrong? - Description Contents Installation Features Modifiers and Laundry Maintenance and Advice Troubleshooting Service Option Modifiers and Special Features Option modifiers continued... GB Stored Programme: Use this option to store your favourite programme. Only one programme can be stored. - To store a programme: Load your machine and add detergent to the dispenser drawer. Select the programme and any options r
Inhaltszusammenfassung zur Seite Nr. 14
Detergents and Laundry Detergent dispenser Washcare Tips GB ! Do not put any items into the drawer, other than DO NOT overload or underload the machine (see detergents designed to be released from the drawer, the Programme Table for maximum load), in addition as they may cause damage or blockage. to reducing the quality of the wash this may also damage your laundry and the machine, whilst Grate causing the machine to become unstable and noisy. Drawer release catch We strongly recommend th
Inhaltszusammenfassung zur Seite Nr. 15
Programmes Something Control Panel and Option Detergents Care and Precautions Wrong? - Description Contents Installation Features Modifiers and Laundry Maintenance and Advice Troubleshooting Service Care and maintenance Cleaning Moulded plug GB ! The plug must not be used without the fuse cover in place. ! Unplug your machine when cleaning it and before all maintenance operations. If a replacement fuse holder/cover is ! Do not clean any part of the machine with abrasive required, it must be of
Inhaltszusammenfassung zur Seite Nr. 16
Precautions and advice The pre-wash cycle is only necessary on extremely General safety GB soiled garments. Avoiding it will save on detergent, Unplug your appliance when cleaning it and during time, water and between 5 and 15% energy. all maintenance operations. This machine should only be used by adults and in Treating stains with a stain remover or leaving accordance with the instructions. them to soak before washing will cut down the Do not overload or underload the machine. In
Inhaltszusammenfassung zur Seite Nr. 17
Programmes Something Control Panel and Option Detergents Care and Precautions Wrong? - Description Contents Installation Features Modifiers and Laundry Maintenance and Advice Troubleshooting Service Precautions and advice Safety advice GB Technical Details Chart ! This machine was designed and built in compliance with the applicable international safety regulations. Models WT965, WT960, WT940 The following information is provided for your safety and should be read carefully. 59.5cm wide Dimensio
Inhaltszusammenfassung zur Seite Nr. 18
Something Wrong? - Troubleshooting If your machine seems not to be working, GO through the following troubleshooting suggestions BEFORE you call your Service Centre (see Service). Section 1: All Ultima (LCD) Models - General Troubleshooting GB Problem: Possible causes / Solution: Check the appliance is fully plugged into the socket and switched on. The machine won’t start: Is the socket ok? Try another appliance in the socket to check. (Nothing lights up on the Is the fuse in the plug ok?
Inhaltszusammenfassung zur Seite Nr. 19
Programmes Something Control Panel and Option Detergents Care and Precautions Wrong? - Description Contents Installation Features Modifiers and Laundry Maintenance and Advice Troubleshooting Service Something Wrong? - Troubleshooting The machine makes a noise or The transit fixings may not have been removed correctly (see Installation ‘Remove the GB vibrates too much during the transit fixings’) - Failure to remove all the parts of the transit fixings will cause the spin cycle. machine to vi
Inhaltszusammenfassung zur Seite Nr. 20
Service 195057 719.00 06/2006 - SIMLEX . Four Ashes, Wolverhampton Before calling the Service Centre: Spare Parts GB Use the troubleshooting guide to see if you can This is a complex machine. Repairing it yourself or solve the problem yourself (see Troubleshooting). having a non-authorised person try to repair it could If not, turn off the machine and call the Service cause harm to one or more persons, could damage Centre closest to you. the machine and could invalidate the spare parts war
