Inhaltszusammenfassung zur Seite Nr. 1
Fully automatic washing machine
User's manual
This manual is for
XQB60-68
Special number: 0030805945
Please read this manual
carefully before using.
Retain it for future reference.
Inhaltszusammenfassung zur Seite Nr. 2
Contents Names of the parts Safety precautions Installation and adjustment Installation the water inlet hose Preparation before washing Put in the laundries Put in the detergent Use the operation knobs Close the top lid Finish washing Disposal after washing Trouble shooting *Answers to question Packing list Specification Water level/Water quantity (about) High/52L, Medium/43L, Low/30L Injection pressure(MPa Rated washing / spinning capacity(kg) 6.0/6.0 (weight of standard dry cloth)
Inhaltszusammenfassung zur Seite Nr. 3
Names of the parts Top lid Water level knob Detergent box Power switch Water inlet valve Power wire Lint filter(Installed by user) Cabinet handle Control panel seat Water channel Filter cover Inner tub Front control board Drain hose Control panel sheet Drain hose hanging hole Pulsator Drain outlet Cabinet protecting cover Drain hose bushing Back cover Rear fixed foot Adjustable foot Adjustable foot seam Meaning and description of the symbols Contents marked with that symbol are related to the
Inhaltszusammenfassung zur Seite Nr. 4
Safety precautions Please insert the power cord into When the machine is normally special receptacle with rated vol- using, please put the power plug tage.Be sure to use single-phase at the location easily to be insert- three pins receptacle.The earthing ed and extracted by hand. Be sure terminal of the receptacle must be to pull the plug off when there's earthed reliably.If possible,please power failure, or the machine is adopt electric leakage protector. being moved, cleaned orwhen it i
Inhaltszusammenfassung zur Seite Nr. 5
Safety precautions Do not stretch hands into the working Do not decompose, repair or alter the machine. It is dangerous even if the machine by yourself. rotation is slow. Take special care of the children. Do not put any hot or heavy items (such Do not wash laundries with volatile as the kettle with hot water ) on the materials (such as thinner, petrol etc.) washing machine. The handicapped or children without Keep the machine away from direct care shall not use the machine
Inhaltszusammenfassung zur Seite Nr. 6
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the bottom plate After you open the package, please lean the washing machine gently down on soft Back items ( like the towel cloth, blanket, etc. ). Install the bottom plate to the bottom of the machine with the eight screws by a cross screwdriver, then lift the machine Front up gently. See
Inhaltszusammenfassung zur Seite Nr. 7
How to change the direction of the drain hose 1.Dismantle the back cover of the washing 3.Dismantle the protecting cover of the machine. drain outletat the other side (method 2.Put down the drain hose. Take off the the same as the bushing). Install the drainhose frame. As indicated in Figure bushing as per indicated in Figure 4. 1, put thedrain hose into the cabinet. 4.Extend the drain hose from the other Then stretch onehand into the cabinet side. Fix thedrain hose onto the base
Inhaltszusammenfassung zur Seite Nr. 8
Install the water inlet hose Confirm the water faucet Water faucet, not suitable Water faucet, suitable It is required that the front end shall be longer than 10cm. The outlet end surface of the faucet shall be flat and smooth. If not please file it to avoid leakage. Connection between the water inlet hose jointer and the water faucet 1.Press the lower end of the lock lever and push down the slider. Take off the water inlet hose jointer from the water inlet hose component. See to Figure 1. 2
Inhaltszusammenfassung zur Seite Nr. 9
Connection between the water inlet hose and the washing machine 1.Do not take off the water absorption cushion. Please check if the cushion is dropped or Nut of the water I nlet hose damaged before each usage. If it happens please contact our after-sale department immediately. 2.Put the nut of the water inlet hose on the valve jointer. 3.Fasten the nut. Swing it gently to confirm if it's suitable. Water absorption cushion Jointer of the water inlet valve Con
Inhaltszusammenfassung zur Seite Nr. 10
1Preparation before washing Preparation before washing 1.Connect the water inlet hose. Open the water faucet. 2.Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. The earth terminal shall not link to gas pipeline and faucet water pipeline. 3.Put down the drain hose. Pay attention to followings before washing the laundries Check if The quantity of When the pulsator Clear the Tie the long the laundries the laundries is
Inhaltszusammenfassung zur Seite Nr. 11
2 Put in the laundries The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. One time washing quantity shall be lower than the rated capacity. The thickness, size, type of the cloth will influence the actual washing capacity. It is suitable for one time washing to put in reasonable amount of laundries and the laundries can be turned
Inhaltszusammenfassung zur Seite Nr. 12
4 Use the operation knobsand buttons a Description of the function of the knobs and buttons Mode and meaning of the indicators Flashing: indicate the running program On: indicate the program about to run, or indicate the selected mode Flashing rapidly: indicate abnormal condition Start Process Selection Pause Spin Quick- Twice- Rinse Wash wash wash "" Process selection button One or more out of the five process programs are available for your option: quick- wash, twice- wash,wash, rinse, s
Inhaltszusammenfassung zur Seite Nr. 13
b .Steps of using the operation buttons and description of the steps "Power" botton Push the "Power" button to Start switch on or off the power. Process Selection Pause When the power is on, push it Quick- Spin again to switch off the power. Twice- Rinse Wash wash wash Water Level Power Low Auto off Medium High Reset On Off Power Low Auto off Medium High Reset On Off "Water Level " button Select or adjust the water level. 1 Push the "Power " button to switch on the power ON OFF Process 2 P
Inhaltszusammenfassung zur Seite Nr. 14
Attention Even there's no water in the tub, the spinning will start after a certain period. Do not use the "Twice wash" program for the woolen laundries. Wash the laundries that are prone to lose colors separately from other laundries. The pulsator will not rotate unless the water is filled to selected water level. Selection method of the procedure programs Times of pushing Contents (the lighted indicators Selected procedure the "Process Applicable procedure program indicate the pr
Inhaltszusammenfassung zur Seite Nr. 15
Start Pause * Total time: including the normal water inlet time, drain time, excluding the power off time. The total washing time may be influenced by the water inlet pressure and water level. * Spin time: the time from intermittent running to finishing * When selecting " Twice-wash " program, first soak for about 20 minutes, pre-wash for about 8 minutes, then soak for about 5 minutes, then do washing, rinsing and spinning. The wash time in the list includes the pre-wash tim
Inhaltszusammenfassung zur Seite Nr. 16
Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. The lint filter must be used during Clean the detergent box and set it on washing. the control panel seat. It must be cleaned in time after each using Lint filter: 1.Pull it up to dismantle. 2.Push it down to install. 3.Clean the filter screen after washing.
Inhaltszusammenfassung zur Seite Nr. 17
Trouble-shooting Answers to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomenan The reason How to settle In spinning, the machine stops running. (
Inhaltszusammenfassung zur Seite Nr. 18
Paching list Name Quantity User's manual One piece Components of the water inlet hose The end connecting to the washing machine Jointer connecting the water inlet hose and the water faucet One piece The end connecting to the water inlet hose jointer Bottom plate One piece Tapping screws Eight pieces One piece Lint filter Fully automatic One set washing machine
Inhaltszusammenfassung zur Seite Nr. 19
WASHING POWDER BOX 0030505636
