Inhaltszusammenfassung zur Seite Nr. 1
HDY-C70/HDY-C70 ME
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Inhaltszusammenfassung zur Seite Nr. 4
Inhaltszusammenfassung zur Seite Nr. 5
Inhaltszusammenfassung zur Seite Nr. 6
Inhaltszusammenfassung zur Seite Nr. 7
D B C
Inhaltszusammenfassung zur Seite Nr. 8
Inhaltszusammenfassung zur Seite Nr. 9
Inhaltszusammenfassung zur Seite Nr. 10
Name of parts Program selector Container handle HDY-C70/HDY-C70 ME Door Table of Contents Before using the dryer Name of parts....................................1 Plinth Important Safety Instructions .....2-3 Installation.....................................4-6 Preparation ......................................7 Earth terminal Back plate How to operate the dryer Power supply cable Control panel.................................8-9 Programming guide.........................10 Back cover board
Inhaltszusammenfassung zur Seite Nr. 11
Important safety instructions Important safety instructions 17.If the supply cord is damaged,it must be replaced by the manufacturer ,its service agent To reduce the risk of fire, electrical shock, or injury to or similarly qualified persons in order to avoid a hazard. persons when using this dryer, follow basic precautions,including 18.Do not operate the dryer if any parts are missing or broken. the following: 1.Read all instructions before using this dryer. 19.Do not store or u
Inhaltszusammenfassung zur Seite Nr. 12
Installation Installation Installation Installation b b Dimensions Dimensions Reversible Door Reversible Door a = 855 mm a = 855 mm This unique feature allows you to install the dryer in the most convenient position b = 620 mm b = 620 mm in you home may be changed. may be changed. The procedure is as follows: The procedure is as follows: its opening direction its opening direction c = 595 mm c = 595 mm 1. Unscrew the 4 hinge screws holding the door onto the machine and
Inhaltszusammenfassung zur Seite Nr. 13
Installation Preparation Drain switchover Attention Before use, clean any deposits from inside the drum of the dryer with During the drying of the laundry, the condensate water is automatically a wet towel; collected in the box inside the machine, the water needs to Clean debris on the filter screen to increase the drying efficiency. be removed from the box after every drying cycle. If your dryer is in the vicinity of a drain, you may allow the condensed Turning on power
Inhaltszusammenfassung zur Seite Nr. 14
Control panel Control panel G - Programme progress display Depending on the programme selected, the drying stage reached is shown by the indicator lamps on the control panel: - Drying - Ready to iron - Airing - End/Anti-crease At the end of a programme,the End/Anti-crease indicator lamp comes on. The drum will continue to rotate at intervals to prevent laundry creasing, if you A - Program selector Turn this kno
Inhaltszusammenfassung zur Seite Nr. 15
Programming guide Drying methods 1.Turning on power Type of Laundry Program Degree of drying Max. load Insert the power plug into an appropriate wall socket and turn on the power. . Operating power supply: (220-240)V/50Hz. COTTON Heavy cotton fabrics, sheets, Extra dry 7 kg Very dry 2. Laundry loading Reference weight of fabrics for drying gowns. Open the door and place the Jeans g Overalls laundry into the drum of the dryer . * Normal Ready to wear 7 kg Cot
Inhaltszusammenfassung zur Seite Nr. 16
Cleaning and maintenance Cleaning and maintenance 1 Cleaning the surface -Using a coin or other tool, push the slides on the cover to the position Wipe the body of the dryer and the control panel with a damp cloth. as shown in the figure and then remove the cover; Remember not use any organic solvent or corrosive agent to avoid -Turn the condenser's handle 90 degrees in the direction as shown in damage to the machine. the figure; -Remove the condenser from the dryer; 2. Cleaning the
Inhaltszusammenfassung zur Seite Nr. 17
Trouble shooting Trouble shooting Prompt and Alarm Information The following must be confirmed before calling for service: In case of an improper operation or problem with the machine when it operates, the code corresponding to the problem will be displayed on the screen: Problem Possible Cause ● Is the power supply plugged in and switched on. Code Category Cause Solutions ● Plug another appliance into the wall socket to There is no change in test if there is power. The dryer does not Con
Inhaltszusammenfassung zur Seite Nr. 18
Wiring circuit Specifications T Type HDY-C70/HDY-C70 ME Item Item (220-240)V/50Hz Power supply K1 NTC NTC K3 K3 K3 K3 K2 K2 H H N N FA FA G G Maximum operating current(A) 12 L L Rated load(kg) 7 Drying program 11 PCB1 PCB1 PCB2 PCB2 Maximum power(W) 2800 Dimensions(H×D×W)mm 855 620 595 R1 R1 R2 R2 P P M M Waterproof level L L IPX4 S S T1 T1 T2 T2 F FA A-Electromagnetic interference inhibitor -Electromagnetic interference inhibitor R1 R1 Heating1 Heating1 R2 R2 Heating2 Heating
