Inhaltszusammenfassung zur Seite Nr. 9
Storage & Travel Your guitar is a piece of art that must be protected. When you are traveling with your instrument, loosen the tuning knobs a turn or two to take pressure off the neck, and protect it with a gig bag or case. While a gig bag offers some protection, mainly from dust, a hardshell case offers the best protection. If you plan to store your guitar for a long period of time (we don’t know why you would want to), remember to slightly loosen your strings to relieve pres- sure o
Inhaltszusammenfassung zur Seite Nr. 10
Accessories Add-on products like stands, hangers and straps that are made of plastic, rubber or man-made materials may chemically or physically react with and damage the finish of your Peavey guitar. Peavey offers a full line of accessories at www.peavey. com/accessories). Every player needs a strap for peak performance, however, straps and strap buttons are designed for “ordinary” use. If you anticipate “above ordinary” use, Peavey recom- mends that you use Super Strap Locks to secure your
Inhaltszusammenfassung zur Seite Nr. 11
Strings Old strings produce dull, buzzing or dead notes, while a new set of strings ring clear and true. If you play often, you will need to change your strings often. A good rule of thumb is that if you play daily, you should change strings every two or three weeks. Replace your strings as you notice them becoming dirty or discolored, be- fore you experience a disappointing loss of performance. See page 12 for detailed instructions on changing strings. 11
Inhaltszusammenfassung zur Seite Nr. 12
Changing Your Strings Standard Tuning Unless you are reconditioning your fretboard (see care and (6th string is the heavey topmost string) cleaning), strings should be changed one at a time to main- Open note E A D G B E tain proper neck tension. New strings should be free of de- String 6 5 4 3 2 1 fects (twists, kinks, bends) that can cause sound irregularities or breakage. All strings must be stretched upon installation. Mnemonic memory aid for string tun- After your first tuning, carefull
Inhaltszusammenfassung zur Seite Nr. 13
ACM® Bridge - Changing Your Strings Changing strings on a Peavey guitar featuring an ACM Bridge is a simple task that will bring new life to your instrument. Tools Needed: Wire cutters Electronic tuner or pitch pipe (optional) Note: Peavey recommends changing one string at a time to maintain proper tension on the neck and bridge. Replace strings with the same gauges or you will need to make truss rod, spring tension, and intonation adjustments as described in this manual. First, detune the 6
Inhaltszusammenfassung zur Seite Nr. 14
ACM® Bridge - Changing Your Strings Insert a new string through the hole in the back of the guitar and pull through until the ball end of the string rests tightly against the underside of the bridge. Thread the other string end across the string saddle, across the nut and into the small hole in the cor- responding machine head tuning post. Allow two inches of slack for turning around the machine head post. Each winding should be beneath the one before it to prevent slippage. Keep a light pres
Inhaltszusammenfassung zur Seite Nr. 1
Electric Guitar
Owner's Manual
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 15
Double Locking Tremolo - Changing Your Strings The Peavey double-locking tremolo system allows for pushing and pulling because the tremolo does not rest on the instrument body. Instead, it uses powerful springs, which are attached in the back of the body, to balance the tension created by the strings so that the tremolo “floats” within the enlarged cavity. While it is one the most reliable and popular tremolo systems in the world, to novice players, or even to the uninitiated seasoned player
Inhaltszusammenfassung zur Seite Nr. 16
Double Locking Tremolo - Changing Your Strings First, detune the 6th string (the thickest, top string) using the machine head tuner—two or three turns should remove the tension on the string. Then, using a mm Allen wrench, unlock the corresponding string clamp located at the nut. Then, back on the bridge, reset each Fine Tuner to its middle range. Now, you are ready to remove the 6th string. Using a mm Allen wrench, unclamp the 6th string at the saddle by loosening the saddle lock screws a
Inhaltszusammenfassung zur Seite Nr. 17
Double Locking Tremolo - Changing Your Strings Thread the other string end under the nut and into the small hole in the corresponding machine head tuning post. Allow two inches of slack for turning around the machine head post (View 2). For the thicker strings (E, A, D), wrap the string end clockwise around post, then run under string at post entry, and pull string tightly over itself, creating a knot. Strings G, B and E should be wound and secured in the same manner (counterclockwise on a
Inhaltszusammenfassung zur Seite Nr. 18
Tune-O-Matic™/Stop Tailpiece - Changing Your Strings To replace strings, thread the new strings through the string holes located on the back of the tailpiece and bring them up and over the saddle. The intonation can be adjusted by moving the saddle forward or backward using a Phillips head screwdriver on the adjustment screw at the rear of the bridge. Raise or lower the two height adjustment spinners on either side of the bridge to adjust string height. The height adjustment of the bar tailpie
Inhaltszusammenfassung zur Seite Nr. 19
Tuning Machine Adjustments Over time, tuners can become loose. Get in the habit of checking the tension with every string change. If you notice a change in the tension of a tuner, use a small flathead or Phillips screwdriver to tighten it (turn clockwise) or loosen it (turn counterclockwise) accordingly. Warning: While the screw should be snug, do not overtighten, as you may strip the screw. 1
Inhaltszusammenfassung zur Seite Nr. 20
String Action String action refers to the distance between the strings and the frets on a stringed instrument. Peavey technicians carefully set optimal string action on every guitar before it leaves our factory; however, changes in temperature and moisture (humidity), changing string gauges, making neck adjustments or tuning can alter string action enough to require a height adjustment to restore your guitar to factory specifications. Undesirable low action causes buzzing, while abnormal
Inhaltszusammenfassung zur Seite Nr. 3
Guitar 6 7 Configuration 8 9 5 11 14 10 12 13 5 15 1. Pickup Height Screw 9. Neck Pickup 2. 5-Way Pickup Selector 10. Position Markers 3. Volume 11. Fret 1 4. Tone Controls 12. Fingerboard 2 5. Strap Button 13. Nut 3 4 6. Bridge 14. Tuning Keys 7. Bridge Pickup 15. String Retainer 8. Middle Single Coil Pickup
Inhaltszusammenfassung zur Seite Nr. 4
Congratulations So, you are the owner of a new Peavey Electric Guitar. Congratulations! Your purchase proves your taste in musical instruments is superb. Peavey offers a wide va- riety of guitars for beginners to professionals, each with unique qualities and features. While our professional luthiers have carefully inspected your guitar, every model re- quires some initial set up, and periodic maintenance is required for peak performance. To ensure proper care of your quality instrument, visit
Inhaltszusammenfassung zur Seite Nr. 5
Cleaning & Care When properly cared for, your Peavey guitar will offer you years of pleasure. Playing your guitar means that you will need to perform regular, general main- tenance, such as cleaning and proper storage, to keep it looking and sounding great. Every time you play your guitar, body oils and perspiration are transferred to the body, back of the neck, headstock, fingerboards, strings, tuners, pickups and bridge. After you finish performing, but before you put your guitar away, ta
Inhaltszusammenfassung zur Seite Nr. 6
Cleaning - Wood To clean and care for the major wood parts of your guitar (body, headstock or the back of the neck), Peavey recommends that you use a clean, soft, lint-free, dry cotton cloth and specially for- mulated guitar polish available at www.peavey.com/acces- sories. Use of an inappropriate rag or polish may result in scratching the finish of your instrument. WARNING: Peavey recommends that you do not use abrasives or solvents on your instrument.
Inhaltszusammenfassung zur Seite Nr. 7
Cleaning - Fingerboard Properly caring for your fingerboard requires special attention. Over time, a fingerboard may lose its natural oils and shrink or exhibit a worn or faded appearance. Peavey recommends that you periodically apply a small amount of Lemon Oil (available at www.peavey.com/accessories) to your fingerboard (after removing strings) using a clean, soft, lint-free, dry cotton cloth, taking care to remove excess oil immedi- ately. A little goes a long way! How do you know when
Inhaltszusammenfassung zur Seite Nr. 8
Cleaning - Metal To clean and lubricate the major metal parts of your guitar (strings, pickups, bridge, tuners), Peavey recommends that you use a different clean, soft, lint- free, dry cotton cloth and specially formulated guitar string cleaner available at www.peavey.com/accesso- ries. Forming a cloth fold and running it up and down the length of each string can quickly clean strings. Failure to routinely clean and lubricate the metal parts of your instrument, including strings, may res
