Inhaltszusammenfassung zur Seite Nr. 1
¨
Model No. WLTL62790
Serial No.
USER'S MANUAL
Find the serial number in the location
shown below. Write the serial number
in the space above for reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, we will guarantee
complete satisfaction through di-
rect assistance from our factory.
TO AVOID UNNECESSARY DE-
LAYS, PLEASE CALL DIRECT TO
OUR TOLL-FREE CUSTOMER
HOT LINE. T
Inhaltszusammenfassung zur Seite Nr. 2
¨ TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure 13. Always wear athletic shoes when using the that all users of this treadmill are adequately treadmill. Never use the treadmill with bare informed of all warnings and precautions. feet, wearing only stockings, or in sandals. 2. Use the treadmill only as
Inhaltszusammenfassung zur Seite Nr. 4
provides information with respect to proper 29. The graphic symbols on the back cover of the grounding of the mast and supporting struc- TV mean the following: ture, grounding of the lead-in wire to an an- tenna discharge unit, size of grounding con- The lightning flash with arrowhead ductors, location of antenna discharge unit, symbol within an equilateral trian- connection to grounding electrodes, and re- gle is intended to alert the user to quirements for the grounding electrode. the presence
Inhaltszusammenfassung zur Seite Nr. 5
the unit is in proper operating condition ¥ Use jumper wire not smaller than No. 6 2 (refer to the drawing below). AWG (13.3mm ) copper, or the equivalent when a separate antenna-grounding elec- 2 ¥ Use No. 10 AWG (5.3mm ) copper, No. 8 trode is used. See NEC Section 810-21 (j). 2 AWG (8.4mm ) aluminum, No. 17 AWG 2 (1.0mm ) copper-clad steel or bronze wire, Note to CATV system installer: This reminder is or larger as a ground wire. provided to call the CATV system installerÕs at- tention to A
Inhaltszusammenfassung zur Seite Nr. 6
BEFORE YOU BEGIN ¨ Thank you for selecting the new WESLO CADENCE please call our Customer Service Department toll-free TV36 treadmill. The CADENCE TV36 treadmill com- at 1-800-999-3756, Monday through Friday, 6 a.m. bines advanced technology with innovative design to until 6 p.m. Mountain Time (excluding holidays). To help you get the most from your exercise program in help us assist you, please note the product model the convenience of your home. And when youÕre not number and serial number bef
Inhaltszusammenfassung zur Seite Nr. 7
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and your own phillips screwdriver . Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is
Inhaltszusammenfassung zur Seite Nr. 8
4. Remove the Lock Knob (54) from the Lock Pin (59). 4 Press the Lock Knob Sleeve (55) into the left Upright (61). 54 Make sure that the Lock Pin Collar (57) and the Spring (56) are on the Lock Pin. Insert the Lock Pin into the left Upright (61) and tighten the Lock Knob onto the Lock Pin. 56 57 59 55 61 5. Note the location of the 75 ohm antenna terminal on 5 the treadmill (for clarity, the treadmill is shown in the storage position). For the television to operate prop- erly, an antenna, a C
Inhaltszusammenfassung zur Seite Nr. 9
TM THE PERFORMANT LUBE WALKING BELT electric shock. This product is equipped with a cord having an equipment-grounding conductor and a Your treadmill features a walking belt coated with grounding plug. Plug the power cord into a surge TM PERFORMANT LUBE , a high-performance lubricant. protector, and plug the surge protector into an ap- IMPORTANT: Never apply silicone spray or other propriate outlet that is properly installed and substances to the walking belt or the walking plat- grounded in acc
Inhaltszusammenfassung zur Seite Nr. 10
CONSOLE DIAGRAM STEP-BY-STEP CONSOLE OPERATION Note: The console requires two ÒAAÓ batteries (not in- cluded). If you have not installed batteries, see assem- bly step 6 on page 8. Locate the on/off switch near the power cord. Make sure that Note: If there is a thin sheet of clear plastic the on/off switch is in on the face of the console, remove it before the on position. In addi- operating the console. tion, make sure that the power cord is prop- erly plugged in (see HOW TO PLUG IN THE POWER
Inhaltszusammenfassung zur Seite Nr. 11
CALS/FAT CALS/ Insert the key into the console. 1 SPEED displayÑThis display shows the ap- Inserting the key proximate numbers of will not turn on the calories and fat calories displays. The dis- you have burned. (See plays will turn on FAT BURNING on page 22.) In addition, the dis- when the ON/ play shows the speed of the walking belt, in miles RESET button is per hour. Every seven seconds, the display will pressed or when change. Arrows in the display will indicate which the walking belt is i
Inhaltszusammenfassung zur Seite Nr. 12
TELEVISION OPERATION DIAGRAM OF THE TELEVISION FEATURES OF THE TELEVISION ¥ Blackstripe picture tube ¥ 181 cable-ready channels (68 standard TV channels and 113 cable channels) ¥ Full-featured on-screen display ¥ User-friendly menu-driven TV controls ¥ Video and audio input jacks 3 5 ¥ Real time clock with one on-timer and one off-timer ¥ Mono audio ¥ Earphone jack 1 ¥ LED power indicator ¥ Auto memory and auto search for TV channel ¥ Automatically skips unavailable channels in your area 2 4 Not
Inhaltszusammenfassung zur Seite Nr. 13
Outdoor Antenna BASIC TV OPERATION Outdoor antennas are subject to weathering that can reduce signal quality. Inspect the antenna and lead-in Read the important wiring before connecting the antenna. Any service cen- precautions on pages ter can explain the various outdoor antennas available. 3 to 5 of this manual. Before operating the TV, make sure that the Combination on/off switch located VHF/UHF Antennas near the power cord is in the ÒonÓ position. In 300 Ohm addition, make sure that the powe
Inhaltszusammenfassung zur Seite Nr. 14
Erasing Channels CHANNEL PROGRAMMING After all channels available in your area have been set into memory, you can erase unwanted channels by fol- Memorizing Channels lowing the steps below: The TV is equipped with a channel memorizing func- 1. Select the unwanted channel by using the CHANNEL tion that allows you to step up or down from the current ss and tt button. channel to the next channel set into memory. Before channels can be selected in this way, they must be set 2. Press the MENU button
Inhaltszusammenfassung zur Seite Nr. 15
Manually Searching for and Storing Channels CABLE TV (CATV) OPERATION 1. Press the MENU button to turn on the pop-up CH MEMORY In addition to normal broadcast reception, the TV is menu. Press the MENU ANALOG equipped to receive up to 125 cable channels (113 and button again to select CLOCK/TIMER 12 TV channels). To use the TV with a cable TV sys- CH MEMORY. tem, following the steps below. 1. Press the MENU button to turn on the pop up CH MEMORY 2. Press the + or Ð button menu. Press the MENU ANA
Inhaltszusammenfassung zur Seite Nr. 16
PICTURE LEVEL ADJUSTMENTS USING THE RECORDING TIMER Picture level controls are preset to nominal levels. If Your TV has the capability to turn on, switch to a chan- desired, you can individually adjust the contrast, bright- nel for recording, and then turn off againÑall automati- ness, color, or tint by following the steps below. cally. Follow the instructions below to use this feature. Note: When setting the clock, the on timer, or the 1. Press the MENU button off timer, if no buttons are press
Inhaltszusammenfassung zur Seite Nr. 17
Setting the Channel to be Recorded USING THE MENU FUNCTION 1. After the on timer has CLOCK AM 12:00 been set, press the When the menu is used, pressing the MENU button ON TIME MENU button repeatedly will display a menu that allows selection of channel AM 12:00 OFF to select ON CH (on memory, the clock, the on timer, the off timer, or pic- ON CH 02 TV channel). ture level controls. When the MENU button is pressed, OFF TIME the display will be as shown below. AM 12:00 OFF 2. Press the + but
Inhaltszusammenfassung zur Seite Nr. 18
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE 1 Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the right. CAUTION: To decrease the possibility of in- jury, bend your legs and keep y
Inhaltszusammenfassung zur Seite Nr. 19
TROUBLE-SHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a surge protector, and that the surge protector is plugged into a properly
Inhaltszusammenfassung zur Seite Nr. 20
PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length. b. If the walking belt is overtightened, treadmill perfor- b 2ÓÐ3Ó mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able
