Inhaltszusammenfassung zur Seite Nr. 1
TM
A AUTOINCL/NE
A FITNESSTRAKS,0MPH
A 1,25HORSEPOWER DCMOTOR
Model No. 831.298&50
Serial No.
t
0 WNE.R 'S MA NUA L
CA UTiON" Read all safety precautions and instructions in this manual carefully
before using this equipment. Save this manual for future reference.
Inhaltszusammenfassung zur Seite Nr. 2
IMPORTANT SAFETY PRECAUTIONS - Z WARNING: Toreduce theriskofburns, fire,electrlo shock orinjury topersons, read the following Important safety precautions and Information before operating the treadmill. 1. Position the treadmill on a level surface, with at least 8 feet of clearance behind the treadmill. Do not place the treadmill on thick carpet, near water or outdoors. Do not operate where aerosol products are used or where oxygen Is being administered. 2_ Plug the power cord directly Into a gr
Inhaltszusammenfassung zur Seite Nr. 3
TABLE OF CONTENTS Before You Begin ............................... 3 Assei'nbly ..................................... 4 _C)peration and Adjustment ........................ 5 Trouble-Shooting and Storage ..................... 6 Conditioning Guidelines .......................... g Part List ...................................... 10 Exploded Drawing .............................. 11 Ordering Replacement Parts ...................... Back Cover Warranty ...................................... Back Cov
Inhaltszusammenfassung zur Seite Nr. 4
ASSEMBLY set-the treadmill in a cleared area and remove the packing materials, Make sure that all parts are included before disposing of the packing materials. Please read each step carefully before beginning. 1. Raise the Upright Post (13) to a vertical position. Insert the Lock Knob (25), with the Lock Knob Washer (24), into - . 5 the Upright Post, and turn the Knob clockwise until almost tight. Leave a little play in the Upright Post for the following steps, 2. Slide the upper end of the Side
Inhaltszusammenfassung zur Seite Nr. 5
OPERATION AND ADJUSTMENT GROUNDING INSTRUCTIONS This product must be grounded, if it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding piug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. DANG ER: Improper connection of th
Inhaltszusammenfassung zur Seite Nr. 6
TREADMILLOPERATION Read the instructions below before starting the treadmill. ° Step onto the foot rails and hold the side rail with a firm grip. 2, Attach the clip on the safety key to the waistband of your clothing. Insert the safety key into the console, To turn the power on, move the key to the right. The power indicator will light. IMPORTANT: Always wear the clip when operating the treadmill, If you fall while wearing the clip, the key will be pulled from the console, instantly turning the
Inhaltszusammenfassung zur Seite Nr. 7
b. Insert the safety key into the console and move the key to the right, The power indicator should light. C'," Check the circuit breaker located on the front of the frame near the power cord. The circuit breaker is designed to protect the electrical system. If the circuit breaker has tripped, the switch will protrude as shown. To reset the circuit breaker, allow the treadmill to cool for five minutes, MOVE THE SAFETY KEY TO THE Reset Tdpped ............. _J OFF POSITION and push the switch back
Inhaltszusammenfassung zur Seite Nr. 8
7. SYMPTOM:THEWALKINGBELTSLOWSWHENWALKEDON a_ Silicone lubricant should be applied to the walking platform before use. Lubricant should be reapptied after every 10 hours of use, and whenever a decrease in performance is noticed. (Uni.Sport silicone spray is recommended,) CAUTION: ALWAYS TURN THE POWER OFF WHEN APPLYING LUBRICANT. (See OPERATION AND ADJUSTMENT in this manual for application instructions.) b. If an extension cord is necessary, use only a 14-gauge general-purpose cord of approximat
Inhaltszusammenfassung zur Seite Nr. 9
CONDITIONING GUIDELINES The following guidelines will help you to outline a personal exercise program. Remember that adequate rest and good nutrition are essential for successful results. Before beginning this or any exercise program, consult your physician. EXERCISE INTENSITY To maximize the benefits of exercising, it is important to exercise with the proper intensity. The proper intensity level can be found using the heart rate as a guide. For effective aerobic exercise, your heart rate should
Inhaltszusammenfassung zur Seite Nr. 10
PART LiST-Model No. 831.298550 Roy. 4J92 Key Reorder Key Reorder No. No. Qty. Description No, No. Qty', Description 1 'I07874 1 Consote Assembty 42 I00691 6 Platform Screw 2 104627 1 Safety Key/Clip 43 012082 5 Motor Nut 3 104625 1 Speed Control Knob 44 101630 4 Motor Washer 4 106889 1 Electronic Monitor 45 107873 1 Front Roller/Pulley 5 101508 1 Pulse Earclip 46 033066 1 Sensor Magnet 6 054013 1 Clothes Clip 47 053025 1 Walking Platform 7 033161 1 Power Indicator 48 107412 2 Foot Rail 8 088015
Inhaltszusammenfassung zur Seite Nr. 11
I t t EXPLODED DRAWING-Model No. 831.298550 Rev. 4/92 Specifications are subject to change without notice. 12 13 12 25 64 43 23 / 46 45 56 57 \ i 47 55 i \ _" 34 30 39 9 4O 48 53 _49 3O 11
Inhaltszusammenfassung zur Seite Nr. 12
ORDERING REPLACEMENT PARTS Each TREADMILL has its own MODEL NUMBER_ Always mention this MODEL NUMBER when requesting service or repair parts for your TREADMILL. All parts listed herein may be ordered through SEARS, ROEBUCK AND COo SERVICE CENTERS and most SEARS RETAIL STORES. If parts you need are not stocked locally, your order will be electronically transmitted to a SEARS PARTS DISTRIBUTION CENTER for expedited handling. WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION: 1o The
