Inhaltszusammenfassung zur Seite Nr. 1
USER’S MANUAL
FX40HR MOTORIZED TREADMILL
MODEL NUMBER: FX40HR
USER WEIGHT LIMITATION: 350lbs. (158kgs.)
SERIAL NUMBER (found on frame):
Inhaltszusammenfassung zur Seite Nr. 2
2 FX40HR MOTORIZED TREADMILL PRECAUTIONS For future service or related questions: Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your Smooth Fitness treadmill. Name: ______________________________ Phone Number: ___________________ Receipt:_____________________ Precautions: WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating t
Inhaltszusammenfassung zur Seite Nr. 3
3 FX40HR MOTORIZED TREADMILL POWER REQUIREMENTS • The emergency dismount function : Please hold the handle bar and step on the foot platform for emergency dismount, the safety key unclipped from the computer automatically. The treadmill power will stop immediately. The running belt will be slowed down, and then user can get off from the treadmill. Power Requirements: IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN ELECTRIC SHOCK. CHE
Inhaltszusammenfassung zur Seite Nr. 4
4 FX40HR MOTORIZED TREADMILL PREASSEMBLY Open the boxes: You are now ready to open the boxes of your new equipment. Make sure to inventory all of the parts that are included in the boxes. Check the Hardware Comparison Chart for a full count of the number of parts included for this product to be assembled properly. If you are missing any parts or have any assembly questions call the manufacturer. Gather your tools: Before starting the assembly of your unit, make sure that
Inhaltszusammenfassung zur Seite Nr. 5
5 FX40HR MOTORIZED TREADMILL HARDWARE COMPARISON CHART Hardware chart: For your convenience, we have identified the hardware used in the assembly of this product. This chart is provided to help you identify those items that may be unfamiliar to you. 9 NO. DESCRIPTION QTY. 13 17 M6 x 15mm Screw 9 4 M8 x 50mm Allen Head 13 Bolt 4 17 #8 x 19mm Screw 8 21 Plastic Cover 2 22 23 21 22 M6 x 20mm Screw 2 23 M8 x 19mm Bolt 4 109 M8 x 76mm Bolt 2 110 Metal Cap 2 132 110 119 H
Inhaltszusammenfassung zur Seite Nr. 6
6 FX40HR MOTORIZED TREADMILL PARTS LIST NO. DESCRIPTION QTY. ORDER NO. NO. DESCRIPTION QTY. ORDER NO. 1 N/A 29 6.5 x 13mm Washer 1 FX40-29 2 Console 1 FX40-02 30 Fold Up Lock 1 FX40-30 3 Top Console Housing 1 FX40-03 31 Spring 1 FX40-31 Bottom Console Housing 4 1 FX40-04 32 Base Frame End Cap 2 FX40-32 5 Wire Protection Ring 1 FX40-05 33 Level Adjust 2 FX40-33 6 Safety Key 1 FX40-06 34 Base Frame 1 FX40-34 7 M4 x 12mm Screw 17 FX40-07 35 Rear Moving Wheel 2 FX40-35
Inhaltszusammenfassung zur Seite Nr. 7
7 FX40HR MOTORIZED TREADMILL PARTS LIST NO. DESCRIPTION QTY. ORDER NO. NO. DESCRIPTION QTY. ORDER NO. 57 6.5 x 13mm Washer 5 FX40-57 85 M6 x 70mm Screw 3 FX40-85 58 Side Rail 2 FX40-58 86 Deck Cushion 8 FX40-86 Front Roller with 59 Deck End Cap - Left 1 FX40-59 87 Flywheel 1 FX40-87 60 Deck End Cap - Right 1 FX40-60 88 Front Roller Shaft 1 FX40-88 61 Running Belt 1 FX40-61 89 Fame Cover - Right 1 FX40-89 62 Rail Guide 8 FX40-62 90 10mm Shaft 1 FX40-90 63 M8 x 25mm Screw
Inhaltszusammenfassung zur Seite Nr. 8
8 FX40HR MOTORIZED TREADMILL PARTS LIST NO. DESCRIPTION QTY. ORDER NO. NO. DESCRIPTION QTY. ORDER NO. 113 N/A Handlebar Rear End 114 Cap – Left #1 1 FX40-114 Handlebar Rear End 115 Cap – Left #2 1 FX40-115 Handlebar Rear End 116 Cap – Right #2 1 FX40-116 Handlebar Rear End 117 Cap – Right #1 1 FX40-117 118 N/A Handlebar Fixing 119 Plate 2 FX40-119 Console Support 120 Tube Fixing Plate 2 FX40-120 Motion Control Wire – 121 Up
Inhaltszusammenfassung zur Seite Nr. 9
9 FX40HR MOTORIZED TREADMILL PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY. 136 135 2 4 137 3 6 7 17 8 5 132 13 120 16 17 11 13 119 119 120 16 17 14 11 10 15 10 17 12 138 9 9 9 19 20 21 22 23 24 21 50 23 28 26 22 25 46 29 30 32 38 33 40 47 31 41 26 50 33 42 37 36 34 39 44 32 44 36 43 45 36 36 45 44 44 45 45 47 Visit us at: www.evofitness.com
Inhaltszusammenfassung zur Seite Nr. 10
10 FX40HR MOTORIZED TREADMILL PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY. Visit us at: www.evofitness.com
Inhaltszusammenfassung zur Seite Nr. 11
11 FX40HR MOTORIZED TREADMILL ASSEMBLY STEP 1: Remove your treadmill from the carton and place it on the floor in an open area as shown in FIG-1. Then remove the Handlebar and place them out of the way for now, as shown in FIG2. Rotate the Console Housing to the correct position then secure with two M6 x 55mm Bolt (132). 132 4 8 Visit us at: www.evofitness.com
Inhaltszusammenfassung zur Seite Nr. 12
12 FX40HR MOTORIZED TREADMILL ASSEMBLY STEP 2: NOTE: YOU WILL NEED THE HELP OF ANOTHER PERSON IN ORDER TO COMPLETE STEP 2 OF THE ASSEMBLY PROCEDURE. First remove the M6 x 55 Bolt (132) and 6 x 13mm Washer (133) from Base Frame (34). Connect the wires from the Left Upright (19) and Base Frame (34) as FIG.2 shown. Attach the Left Upright (19) and Right Upright (20) to the Base Frame (34) and secure in place using four M8 x 15 Bolt (23), two M6 x 55mm Bolt (132) and two 6 x
Inhaltszusammenfassung zur Seite Nr. 13
13 FX40HR MOTORIZED TREADMILL ASSEMBLY STEP 3: Insert the Water Bottle Holder (137) into Top Console Housing (3). 137 3 Visit us at: www.evofitness.com
Inhaltszusammenfassung zur Seite Nr. 14
14 FX40HR MOTORIZED TREADMILL ASSEMBLY STEP 4: Attach the Cross Brace (111) to Left and Right Upright (19 and 20) with Metal Cap (110) and M8 x 76mm Bolt (109). Visit us at: www.evofitness.com
Inhaltszusammenfassung zur Seite Nr. 15
15 FX40HR MOTORIZED TREADMILL ASSEMBLY STEP 5: Secure the Bottom Console Housing (4) to Cross Brace (111) with two M6 x 15mm Screw (9). 4 9 111 Visit us at: www.evofitness.com
Inhaltszusammenfassung zur Seite Nr. 16
16 FX40HR MOTORIZED TREADMILL ASSEMBLY STEP 6: First connect the wires between the Left Handlebar (14) and Console Support Tube (8) as shown then attach the Left Handlebar (14) to the Left Upright (19) using one Handlebar Fixing Plate (119) and two M8 x 50 Bolts (13). Repeat this procedure for the Right Handlebar (15) and Right Upright (20). 122 121 13 119 15 122 13 119 14 122 121 20 19 Visit us at: www.evofitness.com
Inhaltszusammenfassung zur Seite Nr. 17
17 FX40HR MOTORIZED TREADMILL ASSEMBLY STEP 7: Connect the wires as shown. Attach the Front Handlebar (138) to Left Upright (19) and Right Upright (20) with two M6 x 15mm Screw (9) 124 123 138 124 124 123 9 123 20 9 19 Visit us at: www.evofitness.com
Inhaltszusammenfassung zur Seite Nr. 18
18 FX40HR MOTORIZED TREADMILL ASSEMBLY STEP 8: Attach the Handlebar Rear End Cap – Left #1 (114) and Handlebar Rear End Cap – Left #2 (115) to Left Upright (19) using Plastic Fixing Insert (16) and four #8 x 18 Screw (17). Attach the Handlebar Rear End Cap – Right #1 (117) and Handlebar Rear End Cap – Right #2 (116) to Right Upright (20) using Plastic Fixing Insert (16) and four #8 x 18 Screw (17). Visit us at: www.evofitness.com
Inhaltszusammenfassung zur Seite Nr. 19
19 FX40HR MOTORIZED TREADMILL ASSEMBLY STEP 9: Attach one Plastic Cover (21) to each Left Upright (19) and Right Upright (20) and secure in place using one M6 x 20 Screw (22) for each. Your FX40HR treadmill is now fully assembled. Visit us at: www.evofitness.com
Inhaltszusammenfassung zur Seite Nr. 20
20 FX40HR MOTORIZED TREADMILL STABILIZER ADJUSTMENT How to level the treadmill: An uneven floor or improper stabilizer level can cause the treadmill to wobble during use as well as the incline adjustment to function incorrectly. Please follow the procedure described below to make sure the treadmill stabilizer is adjusted correctly prior to use. You may need the assistance of another person to perform this adjustment. 1. To perform the stabilizer adjustment you first need
