Inhaltszusammenfassung zur Seite Nr. 1
OWNER’S MANUAL
RETAIN FOR FUTURE REFERENCE
TOLL FREE CUSTOMER SERVICE
1.888.800.1167
MODEL NUMBER: EVO 1CD
SERIAL NUMBER:
USER’S WEIGHT LIMITATION 350lbs.
APPLICATION STANDARD
ASSEMBLY
OPERATING INSTRUCTIONS
CONDITIONING GUIDELINES
MAINTENANCE
SERVICE
EVO 1CD Motorized Treadmill
Standard Equipment: Optional Equipment:
Inhaltszusammenfassung zur Seite Nr. 2
For future service or related Use the treadmill only as When connecting the power questions. described in this manual. cord, plug the power cord into a grounded circuit. No other Please staple your receipt and/or Place on a level surface, with 6 appliance should be on the same write in the name and phone number feet (2 m) of clearance behind it. Do circuit. of the retail store where you not place the treadmill on any surface purchased your EVO treadmill. that blocks air openings. To protect
Inhaltszusammenfassung zur Seite Nr. 3
power requirements Power Requirements: conductor and a grounding plug. Always plug the power cord into a IMPROPER CONNECTION OF surge protector, and plug the surge THE EQUIPMENT GROUNDING protector into an appropriate outlet CONNECTOR CAN RESULT IN A that is properly installed and RISK OF AN ELECTRIC SHOCK. grounded in accordance with all local CHECK WITH A QUALIFIED codes and ordinances. ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO This product is for use on a nominal WHETHER THE PRODUC
Inhaltszusammenfassung zur Seite Nr. 4
Open the boxes Invite a friend You are now ready to open the boxes Some of the assembly steps may of your new equipment. Make sure require heavy lifting. It is to inventory all of the parts that are recommended that you obtain the included in the boxes. Check the assistance of another person when Hardware Comparison Chart for a assembling this product. full count of the number of parts included for this product to be User Weight Limitation assembled properly. If you are missing any parts or
Inhaltszusammenfassung zur Seite Nr. 5
hardware Allen Wrench Wrench For your convenience, we have (1 piece) (1 piece) identified the hardware used in the assembly of this product. This chart is provided to help you identify those items that may be unfamiliar to you. Wrench Wrench (1 piece) (1 piece) 40 8 4 Metal Cap Screw Safety Key (2 pieces) M4 x 19mm (1 piece) (4 pieces) 46 121 130 16 17 55 Bolt Screw Screw Screw Screw Screw M8 x 78mm M8 x 19mm M6 x 15mm M6 x 20mm M8 x 15mm #8 x 19mm (2 pieces) (4 pieces) (2 pieces) (2 pieces) (4
Inhaltszusammenfassung zur Seite Nr. 6
Step 1: FIG-1 Remove your EVO 1CD Treadmill from the carton and place it on the floor in an open area as shown in FIG-1. Raise the Right and Left Handle Uprights (6 and 7) to the upright position and secure with Screws (17). -6- assembly instructions ASSEMBLY
Inhaltszusammenfassung zur Seite Nr. 7
assembly instructions Step 2: Remove the Screw (51) then rotate the Computer Support (3) up to the correct position as shown and secure with the Screw (51). -7- ASSEMBLY
Inhaltszusammenfassung zur Seite Nr. 8
Step 3: FIG-2 Rotate the Console (39) up to its proper angle and secure with Screws (16) as shown in FIG-2. -8- assembly instructions ASSEMBLY
Inhaltszusammenfassung zur Seite Nr. 9
assembly instructions Step 4: NOTE: If you have the Optional Smooth Music Package follow these instructions before attaching the Console Tray (137). Run the Cd Player Wires from the back of the Console (39) first through the small hole on the Console Tray (137), then through the tabs on the back of the Console Tray (137) and finally through the small hole on the side of the Console (39) as shown. Attach Console Tray Bracket (134) to the Console Tray (137) and secure with Screws (135). Attach the
Inhaltszusammenfassung zur Seite Nr. 10
Step 5: Attach the Cross Tube (45) to the Left and Right Handle Uprights (6 and 7) and secure with the Metal Cap (40) and Bolts (46). Secure the Computer Support (3) to the Right and Left Handle Uprights (6 and 7) by tightening the Screws (18). -10- assembly instructions ASSEMBLY
Inhaltszusammenfassung zur Seite Nr. 11
assembly instructions Step 6: Unscrew Bolt (132). Insert the Console Tray Support Tube (138) into the Cross Tube (45) and secure with Bolt (132). Do not fully tighten until later. -11- ASSEMBLY
Inhaltszusammenfassung zur Seite Nr. 12
Step 7: Rotate the Console Tray Support Tube (138) and slide it into the hole underneath the Console Tray (137). -12- assembly instructions ASSEMBLY
Inhaltszusammenfassung zur Seite Nr. 13
assembly instructions Step 8: Fully tighten Screws (18) and (51) and Bolts (46) and (132) at this time. -13- ASSEMBLY
Inhaltszusammenfassung zur Seite Nr. 14
Step 9: Connect the Motion Control Sensor and Hand Connect the Pulse Sensor wires then attach the Right and sensor wires Left Handlebars (30 and 12) to the Right and Left Handle Uprights (6 and 7) and secure using Screws (121). Connect the sensor wires Connect the sensor wires -14- assembly instructions ASSEMBLY
Inhaltszusammenfassung zur Seite Nr. 15
assembly instructions Step 10: Mount the Handle Cover Right - 1 (42) and the Handle Cover Right - 2 (44) to the Right Handle Upright (6) and secure with Screws (55) and (8). Mount the Handle Cover Left - 1 (43) and the Handle Cover Left - 2 (41) to the Left Handle Upright (7) and secure with Screws (55) and (8). -15- ASSEMBLY
Inhaltszusammenfassung zur Seite Nr. 16
Step 11: Attach the Base Frame End Caps (14) to the Left and Right Handle Upright (6 and 7) and secure using the Screws (130). -16- assembly instructions ASSEMBLY
Inhaltszusammenfassung zur Seite Nr. 17
assembly instructions Speaker Connecting the Speakers and CD Player: Console When connecting the Speakers to the Speaker Knob Console first plug the Speaker Wires into the sides of the Console. Then insert the Speakers into the sides of the Console and secure with Knobs. Knob Plug the two wires from the Console Tray into the CD Player then place it on the Tray as shown in FIG 3. NOTE: There are three plugs located on the left side of the CD player. The rear plug is the AC power. The middle pl
Inhaltszusammenfassung zur Seite Nr. 18
Your treadmill can be folded up for space saving storage. To do this first be sure that the deck is at the lowest incline level. Simply lift the deck up from the rear of the treadmill and fold up until it locks in place. TO PREVENT INJURY BE SURE YOU HAVE A FIRM HOLD WHEN RAISING THE DECK. You will hear a “click” sound as the lock engages. 1. Stand behind the treadmill and lift the deck up. 2. Raise the deck up until the lock engages. -18- CLICK folding instructions FOLD UP FOR STORAGE
Inhaltszusammenfassung zur Seite Nr. 19
roll away instructions How to roll away the EVO 1CD Treadmill: After folding the treadmill tilt it to one side (you may need the help of a friend), reach under the Base Frame (1) and pull down the Caster Bracket (49). Repeat this procedure on the other side. Then to roll away for storage simply grab the handlebars and push as shown below. NOTE: After moving the treadmill to the desired location, make sure to put the Caster Brackets (49) back into their upright position in order to stabilize t
Inhaltszusammenfassung zur Seite Nr. 20
To unfold the treadmill for use begin by standing behind and supporting the deck with your hands. Next release the lock with your foot by stepping on the release lever. TO PREVENT INJURY BE SURE YOU HAVE A FIRM HOLD ON THE DECK BEFORE RELEASING THE LOCK. Slowly lower the deck until it rests securely on the ground. Release Lever 1. Support the deck and release the lock with your foot. 2. Slowly lower the deck until it rests securely on the ground. -20- unfolding instructions UNFOLD FOR USE
