Inhaltszusammenfassung zur Seite Nr. 1
TM
4 Line
Accessory Handset
User’s Guide
Please read this manual before
operating this product for the first time.
Model H5450
Inhaltszusammenfassung zur Seite Nr. 2
Important Information Important Information Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regu- lations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) fo
Inhaltszusammenfassung zur Seite Nr. 3
Important Information Interference Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are de- signed to provide re
Inhaltszusammenfassung zur Seite Nr. 4
Important Information FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.” For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when us
Inhaltszusammenfassung zur Seite Nr. 5
Introduction Introduction CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. Congratulations on your purchase of the RCA H5450 Cordless Handset which is designed to be used only with the RCA 25450 Telephone System. The RCA 25450 Telephone System was built to satisfy a variety of business and residential needs. A prominent feature
Inhaltszusammenfassung zur Seite Nr. 6
Table of Contents h S ead et j ack ......................................................................................................19 Iantmport ItInforma on .............................................................................2 Mute ...................................................................................................................19 EquIpmEnt a pproval ItInforma on ..............................................................2 h old ...............................
Inhaltszusammenfassung zur Seite Nr. 7
Table of Contents v oice Mail Box MG ana eMent o PtionS .............................................................32 t roublEH s Itoo ng t Ips ..............................................................................65 v oice Mail Box ManaGM e ent o PtionS (o S ff ite ) ..............................................34 c aller id ...........................................................................................................66 a SS cce v oice Mail ..............................
Inhaltszusammenfassung zur Seite Nr. 8
Impotrant Installation Information Important Installation Information Safety Precautions • Never install telephone wiring during a lightningstorm. • Never install telephone jacksin wet locations unlessthe jack is specifically designed for wet locations. • Never touch non-insulated telephone wiresor terminals, unless the telephone line is disconnected from the network. • Use cautionwhen installing or modifying telephone lines. •T emporarily disconnect any equipment connected tothe
Inhaltszusammenfassung zur Seite Nr. 9
Connections and Setup Parts Checklist Make sure your package includes the following items: Belt Clip Charging Cradle REDIA L M EN U Base Charging Charger/AC Adapter Cradle Bracket Cordless Handset Battery Pack Battery Compartment Cover
Inhaltszusammenfassung zur Seite Nr. 10
Connections and Setup Cordless Handset Installation Cradle Installing the Charging Cradle and AC Adaptor Plug the transformer end of the AC Adaptor into a standard AC electric power out- let, plug the other end into the “Power 5.5VDC In” jack on the back of the Charging Cradle. Installing the Cordless Handset Battery 1. Locate the back cover and battery pack packaged separately from the Handset. 2. Insert the battery pack and connect the plug on the battery pack to the jack inside the compartm
Inhaltszusammenfassung zur Seite Nr. 11
Connections and Setup Installing the Charging Cradle Wall Mount Choose a mounting location at least 10-1/2” clearance above the top screw hole. 1. Cut out the Charging Cradle Wall Mount Template. See page 71. 2. Hold the template against the wall and mark the mounting screw positions. Insert 3. Drill holes in wall using appropriate size drill bit. tabs here 4. Insert anchor screws into the wall. We recommend #8 pan head screws. Allow 3/16” space between screw heads and wall. Leave 3" 5. Press
Inhaltszusammenfassung zur Seite Nr. 12
Registering the Cordless Handset Registering the Cordless Handset Cordless handsets must be registered with the Base Unit before use. If the Cordless Handset was purchased with the Base Unit as a system, the Cordless Handset has already been registered. The ID will be displayed when the Cordless Handset is pow- ered on. If the Cordless Handset has not been registered or the registration has been deleted, the display shows “Please register”. NOTE: You must program both the Base Unit and the Co
Inhaltszusammenfassung zur Seite Nr. 13
Registering the Cordless Handset 11. Press the soft button. 12. The Cordless Handset will link to the Base Unit at this time. 13. When finished, the Cordless Handset display will show “Registration completed”. The new ID number is shown on the first line of the Cordless Handset display. 14. Repeat the steps for each Cordless Handset to be registered. Deregister Cordless Handset You will program the Base Unit and the Cordless Handset to complete the procedure. NOTE: Cordless Handsets must be d
Inhaltszusammenfassung zur Seite Nr. 14
Registering the Cordless Handset 9. Press the soft button. 10. Press 5 or 6 on the Navigation button to scroll through the options until “Deregister HS” appears on the display. 11. Press the soft button. Deregister HS Deregister HS 12. The Cordless Handset will link to the Base Unit at this time. The Cordless Handset display will show “Deregistration completed,” and return to standby. 13. Repeat the steps for each Cordless Handset to be deregistered. 10. If an invalid ID was entered, the dis
Inhaltszusammenfassung zur Seite Nr. 15
Features Cordless Handset Layout Speakerphone Antenna Voice Mail Indicator Cordless Handset Receiver LCD display Soft Button Soft Button Exit Speaker Talk End/Power Navigation Button (Volume -/Directory/Caller ID) + Keypad Intercom Flash Voice Mail Microphone 1
Inhaltszusammenfassung zur Seite Nr. 16
Features Cordless Handset Charging Cradle Layout Contacts 1
Inhaltszusammenfassung zur Seite Nr. 17
Features Features LCD display Line Handset ID Battery The LCD display has a LED (Light Emitting Diode) for backlighting. The LED dims after Indicator Number Status RSSI 10 seconds of inactivity. The first line of the display can show the Caller ID, time and date, or can show the L1 01 following status icons from left to right: RSSI (Receive Signal Strength Indicator) - During a call, the number of bars is Smith John proportional to the radio signal strength received 1-315-555-1234 Line Indi
Inhaltszusammenfassung zur Seite Nr. 18
Features Left and Right Soft Buttons The function of each Soft Button changes according to what is shown in the display above it. Press to perform the function above the Soft Button. MENU System (Adjust Settings and Registration) Use the Menu system by pressing the soft button to adjust sound set- tings, phone settings, and to register Cordless Handsets. NOTE: You must exit the Menu System before you can make a call. Redial Soft Button Allows you to dial the last ten (10) numbers called. You
Inhaltszusammenfassung zur Seite Nr. 19
Features Headset Jack Allows you to plug in a headset. The headset jack supports a standard 2.5 mm head- set plug. Mute Available through the soft button. During a call, allows you to temporar- ily turn off the microphone on the Cordless Handset, headset, or speakerphone so the person on the line cannot hear you. Flash button Press to send a signal to a phone line to retrieve a dial tone after you end a call, or to perform the call waiting feature provided by local phone companies during a
Inhaltszusammenfassung zur Seite Nr. 20
Features Intercom Button Press to place an intercom call to an extension (Cordless Handset ID or Base Unit ID) or a Group ID. Call Forwarding Allows you to forward future incoming calls from your extension to an external phone number. Call Transferring Allows you to move a call from one extension to another. Conference Calling The conference call function allows a caller from the Base Unit or a Cordless Handset to add a third person to a call. The call must include at least one outside line.
