Inhaltszusammenfassung zur Seite Nr. 1
OPERATOR'S MANUAL
MARINE RADAR
FAR-2807 Series
MODEL
FAR-2107(-BB) Series
Complies with
IMO MSC.192(79)
www.furuno.co.jp
Inhaltszusammenfassung zur Seite Nr. 2
The paper used in this manual is elemental chlorine free. ・FURUNO Authorized Distributor/Dealer 9-52 Ashihara-cho, Nishinomiya, 662-8580, JAPAN Telephone : +81-(0)798-65-2111 Fax : +81-(0)798-65-4200 A : JAN. 2004 All rights reserved. Printed in Japan P : APR. 08, 2011 Pub. No. OME-35190-P (DAMI ) FAR-2107/2807 SER. *00017457512* *00017457512* **00017457512 00017457512** * 0 0 0 1 7 4 5 7 5 1 2 *
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT NOTICES General • The operator of this equipment must read and follow the descriptions in this manual. Wrong operation or maintenance can cancel the warranty or cause injury. • Do not copy any part of this manual without written permission from FURUNO. • If this manual is lost or worn, contact your dealer about replacement. • The contents of this manual and equipment specifications can change without notice. • The example screens (or illustrations) shown in this manual can be
Inhaltszusammenfassung zur Seite Nr. 4
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS The operator and installer must read the applicable safety instructions before attempting to install or operate the equipment. Indicates a potentially hazardous situation which, if not avoided, DANGER will result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, WARNING could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, CAUTION can result in minor or
Inhaltszusammenfassung zur Seite Nr. 5
SAFETY INSTRUCTIONS WARNING WARNING ELECTRICAL SHOCK HAZARD Use the proper fuse. Do not open the equipment. Use of a wrong fuse can result in damage Only qualified personnel to the equipment or cause fire. should work inside the equipment. Keep heater away from equipment. Turn off the radar power Heat can alter equipment shape and melt switch before servicing the the power cord, which can cause fire or antenna unit. Post a warn- electrical shock. ing sign near the switch indicating it should n
Inhaltszusammenfassung zur Seite Nr. 6
SAFETY INSTRUCTIONS CAUTION WARNING The plotting accuracy and response of No one navigational aid should be relied this TT meets IMO standards. upon for the safety of vessel and crew. Tracking accuracy is affected by the The navigator has the responsibility to following: check all aids available to confirm position. Electronic aids are not • Tracking accuracy is affected by course a substitute for basic navigational change. One to two minutes is required to principles and common sense.
Inhaltszusammenfassung zur Seite Nr. 7
TABLE OF CONTENTS FOREWORD ........................................................................................................ xi PROGRAM NUMBER ......................................................................................... xv SYSTEM CONFIGURATION.............................................................................. xvi 1. RADAR OPERATION....................................................................................1-1 1.1 Turning on the Power ................
Inhaltszusammenfassung zur Seite Nr. 8
TABLE OF CONTENTS 1.22 Measuring Range and Bearing Between Two Targets ...............................................1-38 1.23 Target Alarm...............................................................................................................1-39 1.23.1 How to set a target alarm ................................................................................1-39 1.23.2 Acknowledging the target alarm ......................................................................1-40 1.23.3 D
Inhaltszusammenfassung zur Seite Nr. 9
TABLE OF CONTENTS 1.39 Brilliance of Screen Data........................................................................................... 1-75 1.40 Watch Alarm .............................................................................................................. 1-76 1.41 Nav Data ................................................................................................................... 1-77 1.42 Text Window ..................................................................
Inhaltszusammenfassung zur Seite Nr. 10
TABLE OF CONTENTS 3.6 Manual Acquisition .......................................................................................................3-7 3.6.1 Setting manual acquisition conditions ...............................................................3-7 3.6.2 Manually acquiring targets.................................................................................3-7 3.7 Lost Target ........................................................................................................
Inhaltszusammenfassung zur Seite Nr. 11
TABLE OF CONTENTS 4.7 Target Data.................................................................................................................. 4-9 4.7.1 Basic target data............................................................................................... 4-9 4.7.2 Detailed target data......................................................................................... 4-10 4.7.3 Removing a target data display ...............................................................
Inhaltszusammenfassung zur Seite Nr. 12
TABLE OF CONTENTS 5.9.5 Erasing track from the menu, on the screen ...................................................5-16 5.9.6 Erasing track with the cursor ...........................................................................5-17 5.10 Waypoints ..................................................................................................................5-18 5.10.1 Entering waypoints ..........................................................................................5-18 5
Inhaltszusammenfassung zur Seite Nr. 13
FOREWORD A Word to the Owner of FAR-2807/FAR-2107(-BB) Series Congratulations on your choice of the FURUNO FAR-2807/FAR-2107(-BB) Series Radar and ARPA(TT). We are confident you will see why FURUNO has become synonymous with quality and reliability. For over 60 years FURUNO Electric Company has enjoyed an enviable reputation for innovative and dependable marine electronics equipment. This dedication to excellence is furthered by our extensive global network of agents and dealers.
Inhaltszusammenfassung zur Seite Nr. 14
FOREWORD • Two types of trackball-equipped control units are available: RCU-014 (full keyboard) and the RCU-015 (palm control). The trackball is easy to use thanks to the ergonomically designed palm rest. • Simplified operation with point-and-click menu operation. • All functions are accessible by using the trackball alone. • Applicable to HSC (High Speed Craft) • TT, AIS, Radar Plotter and Interswitch supplied as standard. • Meets the requirements in IEC 62388 (Maritime navigation and
Inhaltszusammenfassung zur Seite Nr. 15
FOREWORD Radar Type and Function Availability This radar series is available in five specification types to meet the requirements of Authorities, and function availability depends on specification type. The table below shows those functions that have limited availability. This manual provides descriptions for all functions in this radar series, and we have endeavored to denote in the text those functions that have limited availability. For detailed information on function availability, see
Inhaltszusammenfassung zur Seite Nr. 16
FOREWORD Specification type and function availability (con't) Type Function IMO A B C W Trail Eraser No No Yes Yes No Trails-Color No No Yes Yes Yes Trails-Hide No No Yes Yes Yes Trails-Long No No Yes Yes Yes(12H/24H) Trails-Narrow No No Yes Yes Yes WPT marker No Yes Yes Yes Yes Signal Processing Functions This radar has the signal processing functions described in the table below. All signal processing functions are set with the Picture feature. See section 1.35 for additional
Inhaltszusammenfassung zur Seite Nr. 17
PROGRAM NUMBER PC Board Program No. Version No. MAIN 035-9204 03.** (Merchant) RFC 035-9202 01.** KEY(REMOTE) 035-9203 01.** ARPA 035-9212 01.** ** Minor modification xv
Inhaltszusammenfassung zur Seite Nr. 18
SYSTEM CONFIGURATION See page xvii for detailed information about antenna units and radiators. With FURUNO-supplied monitor FAR-2117(-BB,/2127(-BB)/2817/2827/2827W FAR-2137S(-BB)/2837S/2837SW ANTENNA UNIT ANTENNA UNIT (Performance Monitor PM-31* built in) (Performance Monitor PM-51* built in) Waveguide Waveguide or (For FAR-2827W) Coax cable (For FAR-2837SW) TRANSCEIVER UNIT TRANSCEIVER UNIT RTR-081A RTR-082 For FAR-2827W For FAR-2837SW 1 * FAR-2107 MONITOR UNIT 2 * FAR-2807 1 MU-201CR
Inhaltszusammenfassung zur Seite Nr. 19
SYSTEM CONFIGURATION Antenna unit FAR-2117(-BB) RSB-096 (24 rpm) FAR-2127(-BB) RSB-097 (42 rpm) FAR-2827 FAR-2137S(-BB) RSB-098/099 (21/26 rpm, 200 VAC, 3ø, 50 Hz; 220 VAC, 3ø, 60 Hz; 380 VAC, 3ø, 50 Hz, 440 VAC, 3ø, 60 Hz) RSB-100/101/102 (45 rpm, 220 VAC, 3ø, 50/60 Hz(HSC); 440 VAC, 3ø, /60 Hz(HSC)) FAR-2827W RSB-103 (24 rpm, powered by processor unit) FAR-2837S Same as FAR-2137S(-BB) FAR-2837SW RSB-104/105 (21/26 rpm, 200 VAC, 3ø, 50 Hz; 220 VAC, 3ø, 60 Hz; 380 VAC, 3ø, 50 Hz, 4
Inhaltszusammenfassung zur Seite Nr. 20
SYSTEM CONFIGURATION Blackbox type FAR-2137S-BB FAR-2117-BB/2127-BB ANTENNA UNIT ANTENNA UNIT (Performance Monitor PM-51 built in (Performance Monitor PM-31 built in (FAR-2137S-BB) (FAR-2117-BB, FAR-2127-BB) VGA Monitor CONTROL UNIT POWER SUPPLY UNIT RCU-014 PSU-007 (Keyboard) or For FAR-2137S-BB RCU-015 (Trackball) Control Unit RCU-016 (Remote) PROCESSOR UNIT RPU-013 Sub Display Alarm VDR External Monitor IEC-61162-1 Serial Data Navigator (INS, GPS, etc.) (Input/Output) IEC-61162-1 Serial Dat
