Inhaltszusammenfassung zur Seite Nr. 1
JUICE EXTRACTOR
(WITH OPTIONAL BLENDER ATTACHMENT)
Instruction Manual
Register this and other Focus Electrics products through our website:
www.focuselectrics.com
Important Safeguards .............................................................................................. 2
Operating Precautions ............................................................................................. 3
Assembling Your Juice Extractor .................................................
Inhaltszusammenfassung zur Seite Nr. 2
IMPORTANT SAFEGUARDS To prevent personal injury or property damage, read and follow all instructions and warnings. When using electrical appliances, basic safety precautions should always be followed including the following: • Read all instructions, including these important safeguards and the care and use instructions in this manual. • To protect against risk of electrical shock, do not immerse cord, plugs, or other electric parts in water or other liquids. • Close supervision is alw
Inhaltszusammenfassung zur Seite Nr. 3
• When blending hot liquids, remove centerpiece of two-piece cover. • This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way. • To ensure continued protection against risk of electric shock, connec
Inhaltszusammenfassung zur Seite Nr. 4
ASSEMBLING YOUR JUICE EXTRACTOR Before assembling your juice extractor, wash all loose parts, except the motor base in warm, soapy water, rinse thoroughly and dry. All parts except for the motor base can be washed in the top rack of the dishwasher. The motor base can be wiped clean with a damp cloth. Juice Extractor Optional Blender Attachment Note: When assembling, do not force any of the parts into place. When the parts are prop
Inhaltszusammenfassung zur Seite Nr. 5
1. Place the filter bowl over the motor base aligning the juice outlet spout over the notch in the motor base. Press down with a slight twisting motion until it sits flat. Step 1 2. Place the juicer blade into the filter bowl. Rotate if necessary to align with the motor drive and press down firmly until the juicer blade is tight and even with the top of the filter bowl. CAUTION: There are many small sharp blades for processing the fruits and vegetables. Use care when handling th
Inhaltszusammenfassung zur Seite Nr. 6
4. Swing the cover locking arm up over the juicer cover and snap into place. Make sure the cover locking arm is locked securely into place on both sides of the juicer. Step 4 Step 4A Step 4B 5. Slide the pulp container into place under the pulp outlet chute of the juicer cover. Step 5 6
Inhaltszusammenfassung zur Seite Nr. 7
6. Align and slide the food pusher down into the juicer cover. Step 6 7. Your juice extractor is now ready to use. 8. Place the appliance on a dry, level, heat-resistant surface, away from any edge. 9. Plug cord into a 120 volt AC electric outlet only. 10. Turn the juice extractor on for a few seconds using the pulse, “P” switch position to ensure everything is functioning and all safety switches have been activated. If the juicer will not turn on, unplug from electrical outlet,
Inhaltszusammenfassung zur Seite Nr. 8
USING YOUR JUICE EXTRACTOR 1. Place the appliance on a dry, level, heat-resistant surface, away from any edge. Note: Do not operate this appliance where dust or flour can be suctioned up into the vent openings, as this will cause damage to the appliance. 2. Assemble the juice extractor according to the “Assembling Your Juice Extractor” instructions. 3. Prepare your fruit and vegetables by washing, and if necessary, cutting down to a size which will fit into the feed chute of the juicer co
Inhaltszusammenfassung zur Seite Nr. 9
Note: The juicer should not be operated continuously for an extended period of time; never more than five (5) minutes. For the best juice extraction and to help extend the life of the juicer, turn the juicer “0” (OFF) after approximately one to two minutes of continuous juicing. Clean the juicer cover and juicer blade and empty the pulp container if necessary before resuming. 8. When all food in the filter bowl has been processed and juice is no longer flowing from the juice outlet spou
Inhaltszusammenfassung zur Seite Nr. 10
ASSEMBLING YOUR BLENDER ATTACHMENT (if included) Before assembling your blender attachment, wash all loose parts, except the motor base in warm, soapy water, rinse thoroughly and dry. All parts except the motor base can be washed in the top rack of the dishwasher. The motor base can be wiped clean with a damp cloth. 1. Place the blending jar upside down on the table or counter with the bottom facing up. Note: Do not place the glass blending jar directly on a very hard surface such a
Inhaltszusammenfassung zur Seite Nr. 11
Crushing Ice 1. Fill the blending jar with approximately 2-cups of water. Add the desired amount of ice cubes. 2. Cover the blending jar with the lid and insert the lid cap. 3. When crushing ice, hold the blender stable with the palm of your hand over the Lid. Turn the speed control to “P” (pulse) for 1 second and release. Pause for approximately 2-seconds and repeat the 1 second “P” (pulse) until ice is crushed to desired consistency. 4. Drain any excess water. HINT: approximat
Inhaltszusammenfassung zur Seite Nr. 12
CLEANING YOUR JUICE EXTRACTOR Use caution when cleaning the filter bowl with the juicer blade assembled. Wipe exterior with a damp cloth, and only rinse the interior. Disassemble and clean following the instructions below. 1. Switch motor base to “0” (OFF) and unplug from the electrical outlet. 2. Disassemble the juicer. Note: The filter bowl may have liquid remaining in the bottom. With the juicer outlet spout in the closed position, carefully remove the filter bowl and juicer blade
Inhaltszusammenfassung zur Seite Nr. 13
TROUBLESHOOTING MOTOR DOES NOT OPERATE WHEN SWITCHED ON: No power: • Check the power source. Not assembled correctly: • One of the parts may not be assembled (positioned, aligned or seated) correctly and the safety switches are not activated. Make sure all the parts are assembled correctly and the cover locking arm is locked in place. Motor overheated: • Check to ensure the motor has not labored too heavily due to excessive speed, pressure, or load during juicing or blending. • Ch
Inhaltszusammenfassung zur Seite Nr. 14
PULP TOO WET OR NO JUICE OUTPUT: Juice outlet spout is clogged: • Check to ensure the juice outlet spout is clean and open in the down position. Excessive pulp buildup: • Clean the juicer blade, juicer cover and filter bowl. • Slow down the juicing process by putting less pressure on the food pusher. JUICER LEAKS: • Check to ensure all the parts have been properly cleaned and assembled correctly. • Check to ensure the juice outlet spout is open and not clogged. BLENDING JAR LEAKS
Inhaltszusammenfassung zur Seite Nr. 15
PRODUCT WARRANTY Appliance 1 Year Limited Warranty Focus Electrics, LLC (“Focus Electrics”) warrants this appliance from failures in the material and workmanship for one (1) year from the date of original purchase with proof of purchase, provided the appliance is operated and maintained in conformity with the provided Instruction Manual. Any failed part of the appliance will be repaired or replaced without charge at Focus Electrics’ discretion. This warranty applies to indoor household u
Inhaltszusammenfassung zur Seite Nr. 16
Inhaltszusammenfassung zur Seite Nr. 17
CENTRIFUGEUSE/EXTRACTEUR À JUS (AVEC UN MÉLANGEUR COMME ACCESSOIRE OPTIONNEL) Manuel d’instructions Enregistrez ce produit et d’autres produits Focus Electrics sur notre site Web: www.focuselectrics.com Mises en garde importantes ..................................................................................... 2 Précautions d’utilisation............................................................................................ 3 Assemblage De Votre Centrifugeuse .............
Inhaltszusammenfassung zur Seite Nr. 18
MISES EN GARDE IMPORTANTES Pour écarter tout risque de blessure et de dégâts matériels, lisez et suivez toutes ces instructions et tous ces avertissements. Lorsque vous utilisez des appareils électriques, prenez toujours les précautions de base, notamment: • Lisez toutes les instructions, y compris ces mises en garde importantes et le mode d’emploi et d’entretien décrit dans ce manuel. • Pour vous protéger contre tout choc électrique, n’immergez pas le cordon, les fiches ni aucune autr
Inhaltszusammenfassung zur Seite Nr. 19
• Lorsque vous mélangez des liquides chauds, retirez la pièce centrale du couvercle à deux pièces. • Cet appareil est pourvu d’une fiche polarisée (une lame est plus large que l’autre). Pour réduire le risque d’électrocution, cette fiche est conçue pour s’encastrer dans une prise secteur polarisée dans un sens uniquement. Si la fiche ne s’insère pas complètement dans la prise secteur, retournez la fiche. Si elle ne s’encastre toujours pas, contactez un électricien qualifié. Ne tentez pas d
Inhaltszusammenfassung zur Seite Nr. 20
ASSEMBLAGE DE VOTRE CENTRIFUGEUSE Avant d’assembler votre centrifugeuse, lavez toutes les pièces, sauf le socle- moteur, dans de l’eau chaude savonneuse puis rincez-les et séchez-les complètement. Toutes les pièces à l’exception du socle moteur peuvent aller au lave-vaisselle à condition d’être placés en haut. Le bloc moteur peut s’essuyer avec un chiffon propre et humide. Centrifugeuse Accessoire Mélangeur En Option Remarque : Pendant l’assem
