Bedienungsanleitung Milwaukee ToolsSM105

Inhaltszusammenfassung zur Seite Nr. 1

GENERAL OPERATION: • After measurements, switch the meter
off by pressing the “ON/OFF” key. The
• The meter is supplied
“OFF” message appears on the LCD;
complete with a 9V bat-
release the button.
tery. Remove the battery
compartment cover on Notes:
the back of the meter and
• Before taking any measurement,
USER MANUAL
install the battery while
make sure that the meter has been
paying attention to its po-
calibrated (the “CAL” tag is displayed
PORTABLE pH METER
larity.
on the left lower corner

Inhaltszusammenfassung zur Seite Nr. 2

Release the button and the after entering the calibration mode and ACCESSORIES: message “7.01 pH USE” before the first point is accepted. The MA9004 pH 4.01 buffer, 230 ml bottle (or “6.86 pH USE” for NIST secondary LCD shows the “CLR” mes- M10004B pH 4.01 buffer, 25 x 20 ml sachet buffer set) will be displayed. sage for 1 second, the meter resets to MA9006 pH 6.86 buffer, 230 ml bottle the default calibration and the “CAL” tag • The meter automatically recognizes the M10006B pH 6.86 buffer, 25